N-GEAR LGP JUKE 101 Draadloze Bluetooth Speaker User Guide

N-GEAR LGP JUKE 101 Draadloze Bluetooth Speaker

WARNING

WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE

| CAUTION|
---|---|---
RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUSE THE RISK OF FIRE OR SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS  INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL

 IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions. Heed all warnings.

3. Follow all instructions.

4. Do not use this apparatus near water.

5. Clean only with dry cloth.

6. Do not block any ventilation openings.

7. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety of the polarized of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacture, or sold with the apparatus. When a cart is used, use
    caution when moving the cart/apparatus combination to avoid injury from tip- over. Portable Cart Warning

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped.

15. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

16. The battery shall not be exposed to excessive heat such as sunshine, fire or the like.

17. The MAINS plugs used as the disconnect device, which shall remain readily operable.

 The lightning flash with arrowhead symbol inside an equilateral triangle is intended to alert User of the presence of un-insulated “hazardous voltage” within the product’s enclosure, which may be of sufficient magnitude to induce a risk of electric shock to persons.

 The exclamation mark inside an equilateral triangle is intended to alert user of the presence of het important operating and maintenance (servicing) instructions in the literature accompanying the product.

NOTES:

Please do not attempt to open the back cover or power adapter as opening or removing the covers may expose you to dangerous voltage or other hazards, and it will also cause the restricted servicing to be disabled: There are no user servicing components inside.

NOTES:

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

NOTES:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

Technical specification:

1. Wireless standard: 5.0
2. Transmission distance: 10 meters
3. Output power: 8W*2
4. Speaker :57mm ,4Ω 8W*2
5. Playing time: 8 hours
6. Frequency effect: 80Hz-15KHz
7. Input power:5V—1A
8. Maximum current consumption : 2A
9. Battery type: 18650 lithium ion battery 6000mAh
10. Audio Signal input interface : standard 3.5mm headphone jack (stereo ).

Features:

1. Wireless connection

2. Memory function ,support resume playing from break point

3. Support U disk /TF card/ AUX playing

4. Built-in Lithium ion battery

5. Support MP3 music format

6. Using high-fidelity speakers, the sound is more natural and delicate

7. IPX5 water resistance

8. TWS function support two speakers connection

9. Built-in mic, support hands-free call
   

10. With DISCO RGB LED lighting

Button instruction:

1. TWS button
   1.1 Single click to enter /exit into TWS connection

2. Prepare two speaker ,single click this button for both of them, will hear a voice prompt. ( PS: Please make sure the speaker is disconnected with any wireless device before using TWS function. )

3. Then wait for a few seconds, will hear a voice prompt after two speaker connected with each other
   successfully. Search for the bluetooth ID to connect with bluetooth device.

4. After connected with bluetooth device, operate either speaker, the other one will be synced.

5.  Single click TWS button of either of them will exit TWS mode.
   1.2 Long press to switch the play mode ,from wireless mode – TF mode – U disk mode – AUX mode. (Note: This operation should be under TF card, U-disk, AUX all insert on the speaker in advance)
   1.3 Under wireless connection mode, double click to call back last phone ;single click to answer the phone when there is incoming call; long press to reject the phone call.

6. Light button
   Single click to switch the light ; Long press to turn on /turn off the light ;
   Double click to exit /enter wireless connection under wireless connection mode

7. “ <” Button
   Single click to back last song;
   Long press to reduce the volume

8. “”Button
   Long press about 3 seconds to power on /power off the speaker
   Single click to Play /Pause the music
   “>” Button
   Single click to enter next song ;
   Long press to increase the volume

9. AUX jack

10. USB jack
    When insert a U-disk , the default playing is U-disk playing mode
    TF card support 32GB maximum

11. TF jack :
    When insert a TF card, the default playing is TF card playing mode
    TF card support 32GB maximum

12. Type-c jack

13. Insert the type-c charging cable to charge the speaker

Directions for use:

1. Wireless pairing
   1.1 Turn on the speaker before using wireless pairing ,it default wireless mode playing when turn on the speaker.
   1.2 Search for bluetooth ID “LGP Juke 101” to pair and connect .The speaker will have a voice prompt after connected successfully .

2. Indicator instruction :
   The Indicator is located on this“ ”button
   Wireless searching status : White lights flashes quickly about 0.5s/time
   Wireless pairing status : white light is always on
   Playing status: the white light flashes slowly about 1 second/time

3. Charging indicator:
   The red light will be on under charging status ; the red lights will be off after fully charged

4. Voice prompt
   4.1 Three is a voice prompt when turn on /turn off the speaker
   4.2 When the volume increase to the maximum volume ,there will be a voice prompt. There is no voice prompt reduce to minimum volume.
   4.3 It will ring 3 times after detecting 3.4V lower power ,then turn off.

5. .Mode switching
   5.1 It default wireless mode playing when turn on the speaker
   5.2 Mode switching: When the TF card ,U-disk ,AUX all mode insert on speaker at the same time, long press taws button to switch the playing mode.
   Note: The playing sequence will be from Wireless mode – TF card mode – U disk mode – AUX mode .
   5.3 The device will select the mode preferentially which you insert last for the TF card, U-disk ,AUX mode .

6. Volume
   The default volume is 70% when turn on speaker.

7. The speaker will turn off automatically if there is no any operations about 15 minutes under wireless disconnection .

Troubleshooting

1. Power off automatically: When the battery power is low, the battery protection will be turned on automatically, please charge it for 4hours before use.

2. Unable to play music: The music file storage path can not be recognized by the player. Please store the music file in the root directory of the removable device

3. There is no sound when connected with the computer: Please check if the computer interface is
   connected correctly ,then select the correct audio output port

4. There is no response after clicked the button or the function is disordered. Try again after powered off.

5. When the device is abnormal ,use a slender round bar to press the reset in the AUX jack to reset the speaker.

Customer Support

Please read the operation manual carefully to operation this unit Correctly and keep this manual handy for further reference.

Salad 5-7 | 1948 RE Beaver wink | The Netherlands
[email protected] | www.n-gear.eu | +31 251 222 929

References

• N-Gear

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>