nVent CADDY SNSW37 SNSW Flanged Nut Owner’s Manual

nVent CADDY SNSW37 SNSW Flanged Nut

Product Information

Catalog Numbers

Additional Product Details

• The SNSW Flanged Nut is designed for use on plain and electro-zinc plated hardware only.

Diagrams

• No diagrams are provided in the user manual.

Warning

It is important to follow nVent’s product instruction sheets and training materials when installing and using nVent products. Failure to do so may result in product malfunction, property damage, serious bodily injury, and void your warranty. Instruction sheets can be found at www.nvent.com or obtained from your nVent customer service representative.

Contact Information

If you have any questions or need assistance, please contact nVent customer service:

• Europe Netherlands: +31 800-0200135
• France: +33 800 901 793
• Germany: 800 1890272
• Other Countries: +31 13 5835404
• APAC Shanghai: +86 21 2412 1618/19
• Sydney: +61 2 9751 8500

nVent reserves the right to change specifications without notice.

Product Usage Instructions

Installation

1. Ensure that the threaded rod and the hardware are plain or electro-zinc plated.
2. Select the appropriate SNSW Flanged Nut catalogue number based on the rod size (RS) and wrench size specified in the specifications section.
3. Place the SNSW Flanged Nut on the threaded rod at the desired location.
4. Tighten the SNSW Flanged Nut using the specified wrench size until securely fastened.

Removal and Repositioning

1. Loosen the SNSW Flanged Nut using the specified wrench size.
2. Remove the SNSW Flanged Nut from the threaded rod.
3. To reposition, place the SNSW Flanged Nut at the desired location on the threaded rod.
4. Tighten the SNSW Flanged Nut using the specified wrench size until securely fastened.

Usage as a Stopper for nVent CADDY Rod Lock Assemblies

1. Follow the installation instructions provided with the nVent CADDY Rod Lock Assemblies.
2. When installing the Rod Lock Assemblies, use the SNSW Flanged Nut as a stopper by placing it at the desired location on the threaded rod.
3. Tighten the SNSW Flanged Nut using the specified wrench size until securely fastened.

Usage with Standard Strut Channel Profiles

1. Ensure that the SNSW Flanged Nut is wide enough to work with the standard strut channel profiles.
2. Place the SNSW Flanged Nut on the threaded rod at the desired location.
3. Tighten the SNSW Flanged Nut using the specified wrench size until securely fastened.

FAQ

• Q: Can the SNSW Flanged Nut be used with other types of hardware?
• A: The SNSW Flanged Nut is designed for use with plain and electro-zinc plated hardware only. It is not recommended for use with other types of hardware.
• Q: What is the static load capacity of the SNSW Flanged Nut?
• A: The static load capacity of the SNSW Flanged Nut is 300 lb.
• Q: Can the SNSW Flanged Nut be used in outdoor applications?
• A: The SNSW Flanged Nut is not specifically designed for outdoor use. It is recommended to consult nVent customer service for guidance on outdoor applications.

SNSW FLANGED NUT

FEATURES

• Ideal for retrofit projects, such as trapeze installations, where disassembly of the support system is not desired
• Use as a stopper when installing nVent CADDY Rod Lock assemblies
• Can be easily installed, removed, and repositioned at any location along the threaded rod
• Ready to use out of the box and eliminates multiple pieces of standard hardware
• Functions as a hex nut and flat washer combined
• The washer is wide enough to work with standard strut channel profiles

SPECIFICATIONS

• Static Load Safety Factor: 3:1
• Finish: Electrogalvanized
• Material: Steel

Catalog Number| Rod Size(RS)| Diameter(Ø)| A| B| Wrench Size| Static Load(F)
---|---|---|---|---|---|---
SNSW37| 3/8″| 1.670″| 0.790″| 1/4″| 3/4″| 300 lb
SNSW50| 1/2″| 1.900″| 0.950″| 1/4″| 1″| 300 lb

ADDITIONAL PRODUCT DETAILS

• For use on plain and electro-zinc plated hardware only.

DIAGRAMS

WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

CONTACT

North America

• +1.800.753.9221
• Option 1 – Customer Care
• Option 2 – Technical Support

Europe

• Netherlands:
• +31 800-0200135
• France:
• +33 800 901 793

Europe

• Germany:
• 800 1890272
• Other Countries:
• +31 13 5835404

APAC

• Shanghai:
• + 86 21 2412 1618/19
• Sydney:
• +61 2 9751 8500

nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER © 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.

References

• Building a more Sustainable and Electrified World | nVent
• Building a more Sustainable and Electrified World | nVent

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>