N-GEAR Disco Star 710 Zilver Wireless Bluetooth Party Speaker User Manual
- June 9, 2024
- N GEAR
Table of Contents
N-GEAR Disco Star 710 Zilver Wireless Bluetooth Party Speaker
Please read the operation manual carefully to operation this unit
What’s in the box
- 1 x N-Gear Disco Star 710
- 2 x Wired Microphone
- 1 x AUX Cable
- 1 x USB Cable
- 1 x Remote control
- 2 x AAA battery
This product meets the essential requirements of Directive 2014/53/EU.
https://www.n-gear.eu/doc
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
Need help? Contact us direct!
- Spare parts
- Questions
- Issues
We love to help you!
N-Gear
Salland 5-7
1948 RE Beverwijk
The Netherlands
Tel: +31251222929
Mail: [email protected]
Web: www.n-gear.eu
LASER WARNING
Never look directly into the laser beam.
To be used by an Adult or under the direct supervision of an Adult.
WARNING
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUSE THE RISK OF FIRE OR SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions. Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings.
- Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety of the polarized of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Use only with the cart, stand, tripod, bracket, or table specified by the manufacture, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Portable Cart Warning
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped.
- The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
- The MAINS plugs used as the disconnect device, which shall remain readily operable
The lightning flash with arrowhead symbol inside an equilateral triangle is
intended to alert User of the presence of un-insulated “hazardous voltage”
within the product’s enclosure, which may be of sufficient magnitude to induce
a risk of electric shock to persons.
The exclamation mark inside an equilateral triangle is intended to alert user
of the presence of het important operating and maintenance (servicing)
instructions in the literature accompanying the product.
NOTES:
Please do not attempt to open the back cover or power adapter as opening or
removing the covers may expose you to dangerous voltage or other hazards, and
it will also cause the restricted servicing to be disabled: There are no user
servicing components inside.
NOTES:
This digital apparatus does not exceed the Class B limits for radio noise
emissions from digital apparatus as set out in the Radio Interference
Regulations of Industry Canada. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation.
NOTES:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and the receiver.
-
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected. -
Consult the dealer or an experienced radio/TV technician for assistance.
-
RGB LED DISCO STAR
-
Micro SD card slot
-
AUX in
-
USB in
-
ON/OFF switch
-
USB C charge port
-
MIC input
-
Mic volume
-
4” music speaker with RGB LED
-
Master volume
-
Tweeter
-
2x MIC
-
Remote
-
Laser light
-
Led Light ON/OFF
-
Laser light ON/OFF
-
Red light
-
Green light
-
Volume up
-
Skip to the previous song
-
Skip to the next song
-
Play/Pause
-
Volume down
-
Blue light
-
Mode Button (BT/TF/USB/AUX/TWS)
-
Ocean wave moving speed up
-
Control LED ocean wave light brightness
-
Ocean wave move in single color mode
-
Ocean wave moving speed down
-
Laser light mode (stay or gradation)
-
Ocean wave move in double color mode
-
LED light change
-
Motor ON/OFF
-
Flash
-
Speaker ON/OFF
Instruction
Key Function
- Turn on the speaker ,switch the power ON/OFF button to the left .
- Turn off the speaker ,switch the power ON/OFF button to the right .
- You will hear the voice prompt “N-GEAR makes you move”.
- The unit will enter Bluetooth mode and the front LED light will flash .
- The top LED light and laser light will turn on.
- A voice prompt will advise “Bluetooth mode “ to indicate you are ready to pair with your phone or Bluetooth audio device and the LED light will flash in blue.
Alternatively , use the Remote control Speaker on/off button (21) to turn the speaker on . Important : For the remote control to be active , the power button must be on .
LET’S PLAY MUSIC
Using Bluetooth
- Place the unit and your Bluetooth device no more than 10m apart.
- When powering on the unit, it goes into Bluetooth mode by default.
- Make sure the Bluetooth function on your device is switched on.
- Set your device to search for the Bluetooth Pairing name N-Gear Disco Star 710.
- The voice prompt “Bluetooth connected ” will tell you if the paring is successful .
Using the Remote control
The 2 X AAA battery
- To get your remote control working initially , Insert 2 x AAA battery to the battery compartment located at the bottom of the remote .
- Use the Remote control (21) button to turn the speaker on .
- You will hear the voice prompt “N-GEAR makes you move”.
- The unit will enter Bluetooth mode and the front LED light will flash .
- You can use the Remote control button (1) & (2) to turn the LED lights and laser light on or off .
- The top LED light and laser light will turn on.
- Adjust the volume to your desired level by turning the volume control.
- If your remote becomes intermittent or you find you have to move closer the unit to operate ,then probably batteries need to be replaced .
Using TWS
If you have another DISCO Star 710 speakers , you can pair and play the two
speakers together for a surround sound effect , or have two speakers playing
in different rooms .
- To enter Party Plus Mode, Power ON both speakers and make sure both units are in Bluetooth mode .
- Press and hold the Mode button on the remote control , and the speakers will attempt to pair to each other .
- When the two speakers are paired together a voice will announce the connection .
- Connect Bluetooth device to speakers
- Use your device to select and play tracks, The audio will now be heard through both speakers .
- To disconnect the speakers, press the Mode button on the remote control .
Using AUX audio port
- Plug in the 3.5mm audio cable into the AUX input at the back panel of the speaker. A voice prompt “ AUX IN Mode ” will confirm .
- You can connect to any audio device that has a 3.5mm audio output jack and can playback any audio from this device.
- Choose your favorite song from your connected media device .
NOTE : While using the AUX in function, some functions such as play/pause , previous/next track can only be controlled through your connected media device .
LET’S USE THE MICROPHONE
- Turn on your speaker and insert the 1/4” plug of the Microphone into the Microphone Input port at the rear of the speaker.
- Switch on the microphone by moving the switch button to the ‘ON’ position .
- Turn the Volume of the Microphone to the desired level using the Microphone Volume dial at the front of the speaker.
- Speaker or sing into the microphone and you will hear your voice through the speaker .
- Adjust the microphone volume on front of the speaker to your desired sound level.
Using a Micro-SD card or USB stick
- Insert your USB stick or Micro SD Card at the back panel of the speaker. A voice prompt “USB mode “ or “Micro SD card mode ” will be confirmed .
- Your speaker will automatically playback music from your selected device USB or Micro SD.
CHARGING BATTERY
- By connecting the Type C Charging cable (included) to the back of the unit and USB to USB Adaptor (not included) to an AC Power outlet.
- Charging time is about 5 hours in Power Off mode.
- In Charging mode, the back panel will show a red light indicator and when charging is completed, the light will turn off.
Specifications
- Peak Power 30W
- Power input Type C DC5V,2A
- Peak Power PMPO 50W
- RMS Power 5W
- Frequency Response 60Hz-18KHz
- Woofer size +impedance 4
- S/N Ratio 72≥ dB
- Battery type Li-ion
- Battery capacity 4000 mAh
- Battery Playing Time (Max vol.) 5 hours
- Battery Playing Time (50% vol.) 8 hours
- Battery Playing Time (Low vol.) 12 hours
- Battery Charging Time 5 hours
- Battery weight 91gr
- Bluetooth Version 5.0
- Bluetooth frequency 2400-2483.5MHz
- USB MP3 64GB
- Micro SD/TF MP3 64GB
- Dimensions: 183 x 183 x 241 mm
- Net Weight 1640gr
The undersigned, Neeskens International declares that the radio equipment of the BDisco Star 710 type complies with the 2014/53/EU directive. The complete text is available at www.n-gear.eu
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
This product complies with the requirements of the Europe
Made in China
Manufactured for N-Gear
N-Gear Office
Salland 5 – 7
1948RE Beverwijk
The Netherlands
www.n-gear.eu