N-GEAR 3.TF Wireless 12 Inch Trolley Bluetooth Speaker User Manual
- June 15, 2024
- N GEAR
Table of Contents
N-GEAR 3. TF Wireless 12-Inch Trolley Bluetooth Speaker
Product Information
Specifications:
-
Model: The Flash Juke 12
-
Power: DC9V/1.5A
-
Storage Media: U disk/SD card/TF card
-
External Input/Output: (3.5mm) line-in audio input
Jack/Mic/Guitar input -
Bluetooth Version: Supports Bluetooth connection
Product Usage Instructions
Power and Accessories:
The product can be powered using an adapter or battery. Please make sure to use the specified power range. The accessories or marks installed/printed on the product support various functions.
Storage Media
The product supports storage media such as U disk, SD card, and TF card. Insert the desired storage media into the corresponding slot to access the stored content.
External Input/Output
The product has a (3.5mm) line-in audio input jack for connecting external devices like a microphone or guitar. Use the appropriate cable to connect the desired device to the product.
Bluetooth Connection
- Turn on the power button of the product.
- Press the mode button on the front panel to launch the Bluetooth application. The system voice will announce “Bluetooth mode”.
- Activate Bluetooth on your mobile phone and search for the device name “JUKE 12”. Connect to it. The system voice will announce “Bluetooth connected” once the connection is successful.
- Play music from your mobile phone and enjoy it through the product.
Tips:
To protect your hearing and avoid disturbing others, it is recommended not to use the product at high volume for a prolonged period of time. Keep the accessories of the product for a better user experience.
FAQ (Frequently Asked Questions):
Power Issues
- Phenomenon: The power switch is not turned on
- Reason: Built-in Battery runs out
- Solution: Turn on the power switch or charge the product via an adapter or power cable
No Power:
- Phenomenon: The plug is not plugged in properly or the power cable is defective
- Reason: Other reason
- Solution: Reinsert or replace the power cable
No Sound
- Phenomenon: Microphone Distortion of sound
- Reason: Volume is turned off or in mute mode, Incorrect audio media/input connection selected, Audio file issue, or Other reason
- Solution: Adjust the volume or turn off Mute mode, Select the correct audio media/input connection, Reinsert media with supported format, or Contact after-sales service
Poor Contact:
- Phenomenon: Microphone Volume is off or too low
- Reason: Poor contact or Other reason
- Solution: Replace the power outlet contact or contact the after-sales department
Dear Customer
Thank you for buying The Flash Juke 12,
This product supports a variety of audio inputs.
And switching, such as USB, SD/TF card (Built-in decoder supports MP3/WMA and
other formats) Bluetooth, FM radio, Wireless microphone, Line-in, Aux input,
Microphone/Guitar input Etc. Please read this manual carefully before using
it. Please keep this manual for reference. In order to bring a better user
experience, please keep the accessories of this product.
Safety Warning
- Please use within the specified power range (refer to the back plate), otherwise will damage the product.
- Avoid treading, pressing, and dragging, and folds the power cable and other cable.
- There are high-voltage parts inside, please do not disassemble the product without authorization, to avoid the risk of electric shock.
- Pay more attention to the use environment, and do not play in high temperature, high voltage, and moist dusty environments.
- Turn off the product during the thunderstorms, unplug from the power socket, and disconnect to other products.
- Avoid crashing with a tough object, drop from the height, and tumble.
- Do not touch the back plate and other heat-dissipation parts when the product working.
- Using in a well-ventilated area, do not cover or put other items on the top of the product, and keep proper distance for the product to dissipate heat.
- Forbidden to place liquid on the product, to prevent the product from being tilted/leaked or the risk of electric shock.
- This product is not suitable for children to operate, please do not settle this product in a place where children can reach it.
- This is product has a built-in battery. Do not overcharge for a long time.
- Infrequently used, please charge it regularly to maintain the built-in battery performance and working life.
Warning Mark : high-voltage inside, beware of electric shock
Warning Mark: This product uses a power plug as a disconnection device. It should be easily accessible during use.
This product applies to safe use in tropical and non-tropical climates
This product is only supported to use below 2000 meters elevation; there may be potential safety hazards when used above 2000 meters elevation.
Operating instructions
-
The accessories or marks are installed/printed on the product (all or part, please refer to the actual product), which respectively support the corresponding functions（if have）, please follow the instructions to use as below. DC Power input is for use with adapter or battery. Attention: please use within the specified power range!
-
Storage Media This product supports storage media such as U disk/SD card/TF card
-
External input /output (3.5mm) line-in audio input jack / Mic / Guitar input
-
Functions
-
DC9V/1.5A
-
USB
-
TF
-
LINE
-
MIC
-
MENU
-
REC
-
MODE/MIC.PRI
-
POWER
-
VOLUME
-
VOLUME
-
LED
-
NEXT /CH+
-
P TWS
-
PREV/CH-
The function of the remote:
Power button, supported models can be turned on and off by this button Mute
button, quickly turn off the volume with one click, and press again to restore
the original volume. 0-9 Number buttons, select songs when playing on storage
media such as USB/SD/TF card;
MODE -Mode button, Select audio input/Wireless/radio etc. functions ;
USB /When using USB disk and memory card at the same time choose to play USB
disk or memory card audio; Play /Pause (previous channel/next channel switch
in radio function; Previous /Next (Switch to previous/next channel in radio
function);
- VOL- Volume up;
- VOL+ – Volume down;
- EQ- Preset EQ effect switch;
- REPE(RPT) – REPE(RPT)-Repeat.
Bluetooth connection
- Turn the power button to “ON”. In the front panel, press the mode button to launch the Bluetooth application. The system voice of the device will say Bluetooth mode”.
- Activate the Bluetooth of the mobile phone and search for the device name ”JUKE 12”. Then connect it. The system voice says “Bluetooth connected” once connected successfully.
- Play the music from your mobile phone and enjoy.
Tips :
Protect your hearing from damage and avoid affecting others, Recommends that to do not use this product at high volume for long time In order to bring better user experience, please keep the accessories of this product. Common issues and solutions:
phenomenon
|
reason
|
solution
---|---|---
No Power
|
Power switch is not turned on
|
Turn on the power switch
Built-in Battery runs out
|
Charge the product via adapter or power cable
The plug is not plugged in properly or the power cable is defective
|
Reinsert or replace the power cable
Power outlet is not electric field| Replace the power outlet
Other reason| contact after-sales dept.
No sounds
| Volume is turn off or mute mode| Adjust the volume or turn off Mute mode
Source media/input connection selected incorrectly| Select the correct audio
media/input connection
Audio media/input connection selected audio file|
Reinsert media with supported format
Other reason| Contact after-sales service
Microphone
|
Microphone Volume is off or too low
|
Contact after-sales service
Poor contact| Reinsert and replace the microphone jack
Other reason
|
Contact after-sales service
Distortion of sound
|
Poor audio signal or volume too large
|
Adjust audio files /signals or reduce the volume
Battery running low| Fully charged before using
Squeal from Microphone
|
The microphone volume is too loud or too close to the speakers
|
Adjust the microphone volume and keep proper distance from speakers
WARNING
- WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE
- CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
- CAUTION : TO REDUSE THE RISK OF FIRE OR SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
IMPORTANT SAFETY INSTRUCTIONS
- Read these instructions.
- Keep these instructions. Pay attention to all warnings.
- Follow all instructions.
- Do not use this device near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings.
- Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other devise (including amplifiers) that produce heat
- Do not defeat the safety of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the device.
- Only use attachments/accessories specified by the manufacturer.
- When the device has wheels, use caution when moving the device on wheels to avoid injury from tip-over.
- Unplug this device during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way such as a power supply cord or plug is damaged, a liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture that does not operate normally, or has been dropped.
- The device shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the device.
- The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
- When using the mains plug or appliance plug to disconnect the appliance, do so in a safe manner.
- DO NOT overload wall outlets or extension cords beyond their rating as this may cause electric shock or fire.
The lightning flash with the arrowhead symbol inside an equilateral triangle
is intended to alert the User of the presence of un-insulated “hazardous
voltage” within the product’s enclosure, which may be of sufficient magnitude
to induce a risk of electric shock to persons.
The exclamation mark inside an equilateral triangle is intended to alert the
user of the presence of het important operating and maintenance (servicing)
instructions in the literature accompanying the product.
NOTES
Please do not attempt to open the back cover or power adapter as opening or removing the covers may expose you to dangerous voltage or other hazards, and it will also cause the restricted servicing to be disabled: There are no user servicing components inside.
NOTES:
This digital device does not exceed the Class B limits for radio noise emissions from digital devices as set out in the Radio Interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
NOTES
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for assistance.
For questions or service please contact N-Gear at www.n-gear.eu
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>