N GEAR PARTY 4 Studio Bluetooth Party Speaker User Manual

: June 3, 2024
: N GEAR

Table of Contents

What’s in the box
Overview
Specifications
Documents / Resources

N GEAR PARTY 4 Studio Bluetooth Party Speaker

PARTY 4 Studio Bluetooth Party Speaker

What’s in the box

1 x N-GEAR LET’S GO PARTY 4 STUDIO
1 x Wired Microphone
1 x USB Cable

This product meets the essential requirements of Directive 2014/53/EU.

https://www.n-gear.eu/doc

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

WARNING

WARNING. TO REDUCE THE RISK OF FIRE OR SHOCK. IC) NOT EXPOSE THISPRODUCT TO RAIN OR MOISTURE

|

CAUTION

|

RISK CF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE TIC RISK OF FIRE OR SHOCK. DO NOT REMOVE COVER OR BACK. NC) USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUM FIFD PEPSCNNF

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.
Keep these instructions. Heed ad warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings
install in accordance with the manufacturer’s installation.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety of the polarized of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specie by the manufacture, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over Portable Cart Warning.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way such as power-supply cord or plug is damaged, liquid has been spilled or objects have talent into the apparatus, the apparatus has been exposed to rain or moisture does not operate normally, or has been dropped.
The apparatus shall not be exposed to dripping or splashing and no objects furled with liquids, such as vases, shalt be placed on the apparatus.
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
The MAINS plugs used as the disconnect device, which shall remain readily operable.

The kghtning flash with arrowhead symbol ins ice an equilateral triangle is intended to alert User of the presence of un- insulated -hazardous voltages within the product’s enclosure, which may be of sufficient magnitude to induce a met of electric shock to persons.

The exclamation mark inside an equilateral triangle is into ended to alert user of the presence of the important operating and A maintenance (servicing) instructions in the literature ascoma paying the product.

NOTES:
Please do not attempt to open the back cover or power adapter as opening or removing the covers may expose you to dangerous volt age or other hazards, and it will also cause the restricted servicing to be disabled There are no user servicing components inside.

NOTES:
This digital apparatus does not exceed the Class B limits for r adios noise emissions from digital apparatus as set out in the Radio interference Regulations of Industry Canada. These limits are designed to provide reasonable protection against harmful interference in a r evidential installation.

NOTES:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different fry om that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for as sistance.

Overview

HANDLE
RUBBER SEAL
ON/OFF SWITCH
AUX IN
USB PORT
MICRO SD CARD PORT
MIC IN
MICRO USB CHARGING
CHARGING INDICATOR
LIGHT MODE
MUSIC MODE
PREVIOUS
PLAY / PAUSE
NEXT
BASS / EQ MODE

BT Mode:

a) BT Version: 5.0, with lower power consumption and over 10m meters operating range.
b) ON/OFF, after the power is turned on, the speaker emits a BT mode tone and enter into the pairing status, open the phone BT, search for the device name, click the device name to confirm and then connect. When connected, speaker send a pairing successful tone.

TF/Micro SD Card Mode:

Inserting the TF card, speaker will switch to TF card mode. Music will start automatically.

USB Mode:

Inserting the U disk, speaker will switch to USB mode. Music will start automatically.

AUX Mode:

a) Plug the 3.5MM audio cable into the speaker AUX jack, the speaker will automatically switch to the AUX mode, and the other 3.5MM plug is connected to the phone or computer. Press the “PLAY/PAUSE” button to pause.

MIC Function:

a) In the power-on mode, plug in the wired microphone, begin to work.
( Note: turn on the button of wired microphone before using.)

Charging:

a) Plug the USB cable into the speaker to connect to the 5V charger or computer to charge for inside Li-battery.
b) The item has a red light on the charging indicator. When charging, the indicator light is on. When it is full, the indicator light is off.

Low-power protection:

When the speaker detects that the built-in battery voltage is lower than 3.3V, it will emit a copower alarm sound. When the battery voltage is lower than 3.1V, the speaker will automatically shut down.

Mode cycle:

Press ‘MODE’ button to switch USB—>TF—>BT—>FM—>AUX.

LED flashlight:

Press the ‘LED’ button to convert Lighting mode (three modes)

EQ Mode:

Click to switch EQ mode.

TWS Function:

Turn on speakers, double-click the ‘PAUSE/PLAY’ button. After an indication voice, two speakers could be connected with a same Bluetooth device and then play music together. Long press ‘PAUSE/PLAY’ button again to cancel TWS function.

Specifications

Peak Power 40W
Power input USB DC 5V / 1A
Peak Power PMPO 100W
RMS Power 8W
Frequency Response 150Hz-18KHz
Speaker size +impedance 4, 3 Ohm
S/N Ratio ≥80dB
Battery type Li-ion
Battery capactity 1500 mAh
Battery Playing Time (Max vol.) 1 hours
Battery Playing Time (50% vol.) 2 hours
Battery Playing Time (Low vol.) 3 hours
Battery Charging Time 3 hours
Battery weight 42gr
Bluetooth Version 5.0
Bluetooth frequency 2400-2483.5MHz
USB MP3 MAX 32GB
MicroSD/TF MP3 MAX 32GB
Dimensions: 165 x 155 x 215 mm
Net Weight 950gr

The undersigned, Neeskens International declares that the radio equipment of the LET’S GO PARTY 4
STUDIO type complies with the 2014/53/EU directive. The complete text is available at www.ngear.eu

When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2012/19/EU. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dis pose of your old products with yournormal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.

This product complies with the requirements of the Europe

Made in China
Manufactured for N-Gear

N-Gear Office
Salland 9
1948RE Beverwijk
The Netherlands
www.n-gear.eu

Documents / Resources

| N GEAR PARTY 4 Studio Bluetooth Party Speaker [pdf] User Manual
PARTY 4 Studio Bluetooth Party Speaker, PARTY 4 Studio, PARTY 4, Studio, PARTY 4 Speaker, Studio Speaker, Bluetooth Party Speaker, Bluetooth Speaker, Party Speaker, Speaker
---|---