Dongguan Leaper Electronic Technology WS21005 Wireless Charger Instruction Manual
- June 6, 2024
- Dongguan Leaper Electronic Technology
Table of Contents
Recycled ABS MagClick ® Fast Wireless
Charging Pad
Instruction Manual 7143-41
Functions:
- MagClick® Wireless Charging Surface
- Type-C Input Port
- LED Indicator
What’s included:
1 x Wireless Charging Pad
1 x USB to Type-C Cable
1 x Instruction Manual
Tech Specifications
- Wireless Input Power: 5V/2A, 9V/1.5A
- Wireless Output Power: 5W/7.5W/10W
Instructions:
- Wireless Charging Mobile phones and other electronic devices:
- Insert the USB-C output of the charging cable (included) into the input port of the wireless charging pad and connect the USB output of the cable to a certified wall adapter (not included).
- LED indicator (3) will flash WHITE once then turn off when the device is in wireless charging standby.
- Place the wireless charging supported mobile device on the wireless charging surface(1), LED will glow WHITE when the device is charging.
- The phone will begin to charge automatically.
- Once fully charged, remove your device from the charging pad and disconnect the charging cable.
•• Note: When wireless charging, be sure there is no object between the device and charging surface that would interfere with the charging process.
2. MagClick® Wirelessly Charging Feature:
- If your device supports MagSafe, the magnets in your iPhone will connect to the MagClick® wireless charging surface(1) of the pad for more secure charging.
- This item is also compatible with other items, the magnetic function just won’t work.
SAFETY PRECAUTIONS:
- WARNING-When using this product, basic precautions should always be followed:
- Read all the instructions before use.
- Do not overcharge your phone. The unit may become hot under excessive use Remove your phone once it is fully charged. Never charge your phone for more than 7 hours at a time.
- To reduce the risk of injury, close supervision is required when the product is used near children.
- Do not expose the device to moisture.
- Do not use the device in excess of its output rating. Overload outputs above the rating may result in a risk of fire or injury.
- Do not use the device if damaged or modified.
- Do not disassemble the device. For repairs, seek a qualified service professional. Incorrect reassembly may result in a risk of fire or injury.
- To ensure product safety, ensure that qualified service professionals use only identical replacement parts.
- Attachments on the back of your phone can impede the effectiveness of the wireless charger and may lead to overheating. You must remove attachments from the phone beforehand.
FCC Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment.
| 
---|---
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be installed and operated with a minimum distance of 20cm the radiator
your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>