Luminzone 17 Inch Industrial Light Fixtures Ceiling Light Installation Guide
- June 17, 2024
- Luminzone
Table of Contents
Luminzone 17 Inch Industrial Light Fixtures Ceiling Light
Product Information
Specifications
- Junction Box: 0
- Single Mounting Bracket: 1
- Studs: 2
- Mounting Screws: 2
- Spanner: 1
- Leading Wires: 0
- Wires Nuts: 3
- Wires: 1
- Canopy: 1
- Screw Nuts: 3
- Socket: 3
- Ball Nuts: 2
- Glass: 1
- Threaded Nipple: 3
- Iron Frame: 1
- Light Bulb: 0
Product Usage Instructions:
Step 1: Assembly
Assemble the following parts: O, N, M, I, J, E
Step 2: Wiring
Connect the white supply wire to the white or identified fixture wire using UL listed wire nuts. Connect the black supply wire to the plain or black fixture wire. Ensure proper connections are made.
Step 3: Mounting
Mount the fixture using parts H, F, G, L, I. Follow the appropriate mounting instructions for your specific installation.
Step 4: Grounding
Connect the bare or green ground wire from the supply to the bare or green fixture ground wire. Secure the connection using the green ground screw.
Step 5: Final Steps
Complete the assembly by attaching the remaining parts: P, K, BARE or GREEN GROUND WIRE FROM SUPPLY, BARE or GREEN FIXTURE GROUND WIRE, or BARE or GREEN GROUND WIRE FROM SUPPLY. Use the provided screws and nuts to secure the components.
Warning: If any special control devices are used with this fixture, followthe instructionscarefullytoassurefull compliancewithN.E.C.requirements. If there are any questions, contact a qualified electric contractor.
Warning: California Residents Proposition 65 This product contains lead, a chemical known to the state of California to cause cancer andbirth defects or other reproductive harm. Do not place the product in your mouth. Wash your hands after handling this product.
Caution: Electrician installation highly recommended. All glass is fragile, use care when handling glass component(s) and or lamp(s). Read instructions carefully and turn electricity off at the main circuit breaker panel before beginning the installation.
STEPS
PARTS INCLUDES
FAQ
Q: What should I do if I have questions about using special control devices with this fixture?
A: If you have any questions or need assistance regarding the use of special control devices with this fixture, it is recommended to contact a qualified electric contractor for guidance and to ensure compliance with N.E.C. requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>