UNITEK P1215A Fast Charging Station for Multiple Devices User Manual
- June 16, 2024
- UNITEK
Table of Contents
User Manual
6 Port Charging Station with 1 QC 3.0 Port
Thank you for choosing Unitek 6 Port Charging Station with 1 QC 3.0 Port. Please read the user manual carefully before use and save them. If you need any help, please contact our professional customer service team support_us @unitek-products.com.
Product Diagram
A: QC 3.0 Port
B: Smart USB Output (Each 5V/2.4A Max)
C: Charging Station Power Connector
D: LED Switch Button
E: Plastic Divider
F: Divider for Watch
| Product Port | 6 USB-A Port (5A+1QC) |
|---|---|
| Input | AC 100-240V (50-60Hz) |
| Output | QC 3.0: 5V/3A, 9V/2A, 12V/1.5A |
5USB-A: 5V/2.4A max
Length of Power Cord| 5 feet
Product Dimension| 18512931mm / 7.285.08*1.22inch
Product Weight| 512g / 1.13lb
Package Contents
- 1 x Charging Station
- 1 x Power Cord
- 1 x User Manual
- 8 x Clear Divider
- 7 x Short Charging Cable (4-iPhone, 1-Micro USB, 2-Type C)
How to Use
- Connect the power cord to the charging station.
- Install the divider on the charging stand.
- Connect the short charging cable to your device, and then it will start to charging.
- When charging, you can press button to turn on/off the blue LED light. LED light turns off automatically when in trickle charging mode.
Note
- When inserting the bracket, please pay attention to the insertion slot, ensure that no space between the charging station and the bracket.
- Keep away from liquids and high temperature sources when using.
- If there have the dust on the anti-slip rubber surface of the charging station, You may use a dry or dump cloth to wipe it off.
- If you use a dump cloth, make sure to unplug the cable from the power outlet before cleaning, and dry it up before plugging the power back.
- Do not drop, knock or disassemble the product yourself.
- There is an on/off switch on the side of the charging base. This is not a power switch. lt only turns the status LEDs (blue lights) on or off.
- Keep it out of reach of children.
FAQ
Q: Why the charging time is varying each time?
A: This is because smartphones and tablets will automatically evaluate the battery power level and output the most efficient power. When the charging device has higher remaining battery, the charging speed will be slower, then switch to trickle charging.
Q: Could a QC3.0 port be applied to charge the device not support quick charge?
A: Yes. The QC3.0 port will automatically recognize the voltage & current of charging device. If it was connected to a QC2.0 or not quick charge device, the voltage will be automatically set to 5V to protect against over-voltage of the device.
Q: When a QC3.0 or QC2.0 device is to be charged, but it is not recognized as a fast-charge device, Why?
A: It should involve using the charging cable with poor quality which will seriously affect the current transmission and result the device cannot be identified as a support QC3.0 or QC2.0 device. It is highly recommended that original or high-quality cable should be used in order to enjoy the fast- charge function.
Q: Why the charging station stop working suddenly?
A: When the total power output exceeds the limit, the charging station will stop charging automatically to protect the devices avoid damage caused by over-voltage. Just remove some of the devices and turn on the charging station, then you can continue to use it.
Warranty
The Unitek 6 Port Charging Station with 1 QC 3.0 Port is covered by Unitek warranty for 24 months. lf the product fails due to manufacturer defects, please contact us by email at support_us@unitek- products.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>