Moes M30 x 1.5 Smart Radiator Thermostat User Manual

Moes M30 x 1.5 Smart Radiator Thermostat

Product Information

Specifications:

• Power Supply: 3 x 1.5 V alkaline AA batteries (not included)
• Protection Level: IP20
• Ambient Temperature: 0~50°C
• Surface Temperature: 90°C Max (on the radiator)
• Standby Current: 30A Min
• Connection: M30 x 1.5mm Linear Travel
• Dimensions(W x H x D): 58.4mm x 97mm x 58.4mm
• Weight: 220 g

Description:
The WIFI Smart Thermostat Radiator Valve by MOES HOME is an intelligent device that allows for efficient control of valve opening and closing, resulting in energy saving and environmental protection. It features an automatic debugging function that is suitable for all kinds of mainstream valves. The device supports a Wi-Fi fast distribution network, eliminating the need for an additional gateway. The motor of the valve uses ultra-quiet technology to minimize noise pollution. It also includes an automatic conversion of summertime and wintertime, which can be activated or terminated as needed.

Standard Accessories:

• TRV (Thermostatic Radiator Valve)
• Adapters for Danfoss RA valves, Danfoss RAV valves, Danfoss RAVL valves, Caleffi valves, Giacomini valves, and M28 valves

Features:

• Supports remote control by smart life app
• Voice control by Amazon Alexa and Google Assistant
• Automatic debugging function
• Wi-Fi fast distribution network
• Intelligent PID algorithm for efficient control
• Ultra-quiet motor technology
• Automatic conversion of summertime and wintertime

Product Usage Instructions

Installation:

1. Press the battery compartment lock, remove the cover, and insert 3 x 1.5 V alkaline AA batteries (not included) ensuring the polarity is aligned correctly.
2. Initialize the mandrel by pressing the middle button until the display starts blinking.
3. Install the TRV union nut with M30 x 1.5mm thread for the heating valve and tighten the nut.
4. Press the middle button again to start the valve-adjusting process. Wait for several minutes until the process is completed and the initialized screen is displayed.

Temperature Control Mode:
Press the middle button to switch between Auto mode and Manual mode.

Auto Mode:
When the “Auto” symbol is displayed on the screen, it is under Auto mode. Four time periods and setting temperatures can be programmed per day, with one week as a cycle, based on customized needs.

Manual Mode:
When the “Auto” symbol is not displayed on the screen, it is under Manual mode. The device will work according to the current setting temperature without being controlled by the period program.

Temporary Mode:
Under Auto mode, after setting the temperature, the “Temporary” symbol will blink on the screen indicating that it has entered Temporary mode. In this mode, the device is switched to Manual mode temporarily and is not controlled by the period program. It will return to Auto mode at the start of the next period.

Attention: Only Manual mode is available when the device is not connected to the Internet.

Stop Heating And Pause Heating:
To stop heating in summer, rotate the knob clockwise until the “Manual” symbol is displayed under Manual mode. At this time, the heating valve is fully open, which can extend the lifespan of the valve.

FAQ:

• How do I install the adapter correctly?
  The correct adapters for different valve types are as follows:

  • For Danfoss RA valves: H13mm
  • For Caleffi valves: H11mm
  • For Danfoss RAV valves: H8.6mm
  • For Giacomini valves: H4.8mm
  • For M28 valves: H11mm

• What are the supported control methods for this radiator valve?
  The radiator valve supports remote control via the smart life app and voice control via Amazon Alexa and Google Assistant.

Description

• Automatic debugging function, suitable for all kinds of mainstream valves.
• The device supports Wi-Fi fast distribution network, no additional gateway is required.
• Intelligent PID algorithm, efficient control of valve opening and closing, energy saving and environmental protection.
• The motor adopts ultra—quiet technology to minimize noise pollution.
• The device has activated the automatic conversion of summertime and winter time, which can be activated or terminated as needed.

Technical specifications

Standard Accessories

Display Symbols

Installation

1. Press the battery compartment lock, remove the cover, and insert the batteries.

2. Initialize, the mandrel pulls back, then “ ****” is displayed and blinking on the screen.

3. When “ *” stop blinking, install the TRV union nut with M301.5 thread for heating valve, and then tighten the nut.
   Attention:** While inserting the batteries, please make sure the polarity of battery (+/-) is aligned.

4. Press the middle button and then“ ****” start blinking, the device enter the valve-adjusting process. After several minutes, the process is completed when the initialized screen is displayed.

How to install the adapter correctly

Temperature Control Mode

Press the middle button to switch between Auto mode and Manual mode.

• Auto mode
  When “ ” is displayed on the screen, it is under Auto mode. Four time periods and setting temperature could be programmed per day, one week as a cycle, based on customized needs.

• Manual mode
  When “ ” is not displayed on the screen, it is under Manual mode. The device will work according to current setting temperature, without controlled by the period program.

• Temporary mode
  Under Auto mode, “ ” will be blinking after setting temperature, and then it will enter Temporary mode.The device is switched to Manual mode temporarily, without controlled by the period program. It will return to Auto mode by next period.

Attention: Only Manual mode is available when the device is not connected to Internet.

Stop Heating And Pause Heating

• ON: In summer, rotate the knob clockwise until “ ****” is displayed under manual mode to stop heating. At this time, the heating valve is fully open. This can extend the use life of valve.
• OFF: In winter, rotate the knob counterclockwise until “ *” is displayed under manual mode to pause heating temporarily. At this time, the heating valve is closed and the frost protection is activated.
  Attention:** After the antifreeze function is activated, the valve will open when the room temperature is lower than 5°C, and the valve will be closed when the room temperature exceeds 7°C to prevent damage to the radiator thermostatic valve due to freezing.

SETTING

Adjust Setting Temperature And Screen Rotation

• Adjust setting temperature: Rotate the knob to adjust setting temperature, stepping by 0.5°C.
• Screen rotation: Long press the Set Button for 3 seconds to switch the screen display direction.

Open-window Function And Anti-scale

• Open-window function: First, enter the APP home page to turn on the window detection function, the device will automatically identify whether the window is open. When it is detected that there is cold wind, and the temperature drops by more than 1.5°C within 4.5 min, the open-window function will be activated. At this time, the screen displays “ ****” and the temperature is set to 12°C.
• * Attention: While the open-window function is activated, the following operations will terminate it from taking effect. D Temperature setting operation on the APP or device. (2) The detected temperature rises by more than 1.5°C within 4.5 minutes. @ No operation on the APP or device within 30 minutes.
• Anti-scale: TRV executes routine decalcification every Monday at noon to protect the valve from calcification. “ ****” will be displayed on the screen during decalcification.

Child Lock Function And Restore Factory Settings

• Child lock function: Long press the middle button for 3 seconds until “ ” is displayed on the screen to activate the child lock. While the device is locked, long press middle button for 3 seconds until “ ” disappears to deactivate the child lock.
• Restore factory settings: Long press the middle button and insert the battery at the same time until “ *” is displayed on the screen and blinking for 3 seconds, the device will be restored to factory settings and restarted.
  Attention:** Once the device is restored to factory settings, all previous settings can not be recovered.

Preparation for Use

1. Download MOES App
   MOES APP is upgraded as much more compatibility than Tuya Smart/Smart Life APP functional well for scene controlled by Siri, widget and scene as the fully new customized service.
   ( Note: Tuya Smart/Smart Life APP still works, but MOES APP is highly recommended)

2. Registration or Log in.

Add Device

1. Under manual mode, rotate the knob counterclockwise until “ ” is displayed. Then long press the middle button for 3 seconds until “ ” is blinking.
   * Attention: Network configuration can only be done under manual mode. Please turn on the Bluetooth of your phone in advance.

2. Enter the “Home” interface of the APP, click “ ” in the upper right comer, select the “Add” button in the pop-up window, and finally click “ ” to enter the Wi-Fi password interface;

3. Select 2.4G Wi-Fi and enter the password, click “Next”, and then wait for the connection to succeed.

4. After the addition is successful, click “Next”, and the wifi smart thermostat has been added successfully.

Mode Selection

• Click “ **” to select mode. Attention:* Attention: Click “ ” or “ ” to adjust the setting temperature.
• Auto mode: Four-time periods and setting temp. could be programmed per day, one week as a cycle, based on customized needs.
• Manual mode: The device will work according to the current setting temp. without being controlled by the period program.
• Off mode: The valve will be closed to stop heating.
• ON mode: The valve will open in heating.

Week Program Setting

1. Click “ ****” to enter the week program setting page.
2. Set four time periods and setting temperature based on customized needs.

Advanced Setting

• Click “ ****” to enter the advanced settings page.

Voice Control

• After waking up the speaker, you can say:
  • Amazon Alexa: Alexa,
  • Set the DEVICE NAME to 26 degree
  • Drop the DEVICENAME by 1 degree
  • Raise the DEVICENAME by 1 degree
  • Make the DEVICENAME warmer
  • Turn on the DEVICENAME child lock
  • Turn off the DEVICENAME child lock
  • What temperature is the DEVICENAME set to
  • What is battery on the DEVICE NAME
  • Google Assistant: OK google,
  • Set the DEVICE NAME to 23 degree
  • Turn on the DEVICENAME child lock
  • Turn off the DEVICENAME child lock
  • IS my DEVICENAME child lock on?
  • Turn on child lock for the DEVICE NAME
  • Turn off child lock for the DEVICE NAME
  • Set the DEVICE NAME to auto
  • Set the DEVICE NAME to manual
  • Attention: “DEVICE NAME?” is the device name, you can also name it yourself. The temperature unit of TRV and smart speaker must be identical.

Troubleshooting and Maintenance

SERVICE

1. During the free warranty period, if the product breaks down during normal use, we will offer free maintenance for the product.
2. Natural disasters/man-made equipment failures, disassembly and repair without the permission of our company, no warranty card, products beyond the free warranty period, etc., are not within the scope of free warranty.
3. Any commitment (oral or written) made by the third party (including the dealer/service provider) to the user beyond the warranty scope shall be executed by the third party.
4. Please keep this warranty card to ensure your rights
5. Our company may update or change the products without notice. Please refer to the official website for the updates.

RECYCLING INFORMATION
All products marked with the symbol for separate collection of waste electrical and electronic equipment (WEEE Directive 2012/19 / EU) must be disposed of separately from unsorted municipal waste. To protect your health and the environment, this equipment must be disposed of at designated collection points for electrical and electronic equipment designated by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences for the environment and human health. To find out where these collection points are and how they work, contact the installer or your local authority.

WARRANTY CARD

Product Information

• Product Name ____
• Product Type _____
• Purchase Date ____
• Warranty Period __
• Dealer Information ____
• Customer’s Name _____
• Customer Phone __
• Customer Address ____

Maintenance Records

Thank you for your support and purchase at we Moes, we are always here for your complete satisfaction, just feel free to share your great shopping experience with us.

If you have any other needs, please do not hesitate to contact us first, we will try to meet your demand.

EVATOST CONSULTING LTD
Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
Tel: +44-292-1680945
Email: [email protected]

AMZLAB GmbH
Laubenhof 23, 45326 Essen
Made In China

Maker: WENZHOU NOVA NEW ENERGY CO.,LTD
Address: Power Science and Technology Innovation
Center, NO.238, Wei 11 Road, Yueqing Economic
Development Zone, Yueqing, Zhejiang, China
Tel: +86-577-57186815
After Service Email: [email protected]

References

• MOES Smart: Create Your Smart Life With Smart Home Devices

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>