Taylor T-6749 Mini Impact Wrenches Installation Guide
- June 16, 2024
- TAYLOR
Table of Contents
**Taylor T-6749 Mini Impact Wrenches Installation Guide
**
DIMENSSION INSTRUCTION
MINI IMPACT WRENCHES
T-6739 3/8” IMPACT WRENCH
T-6749 1/2” IMPACT WRENCH
OILING INSTRUCTIONS:
OIL AFTER EACH USE WITH
A FEW DROPS OF AIRTOOL
OIL THROUGH THE AIR INLET.
RUN FOR 1 SECOND TO
COAT ALL INTERNAL PARTS.
USE 90 PSI MAXIMUM
REF # | PART # | DESCRIPTION | QTY |
---|---|---|---|
1 | 673901 | HEX SCREW | 4 |
2 | 673902 | WASHER | 8 |
3 | 673903 | HAMMER CASE | 1 |
4 | 673904 | GASKET | 1 |
5 | 673905 | ANVIL BUSHING | 1 |
6 | 673906 | ANVIL COLLAR | 1 |
7 | 673907 | O-RING | 1 |
8 | 673908 | ANVIL 3/8” | 1 |
8 | 674908 | ANVIL 1/2” | 1 |
9 | 673909 | HAMMER PIN | 2 |
10 | 673910 | HAMMER | 2 |
11 | 673911 | HAMMER CAGE | 1 |
12 | 673912 | WASHER | 1 |
13 | 673913 | BEARING | 1 |
14 | 673914 | FRONT END PLATE | 1 |
15 | 673915 | CYLINDER | 1 |
16 | 673916 | PIN | 1 |
17 | 673917 | ROTOR BLADES (SET OF 6) | 1set |
18 | 673918 | ROTOR | 1 |
19 | 673919 | REAR END PLATE | 1 |
REF # | PART # | DESCRIPTION | QTY |
--- | --- | --- | --- |
20 | 673920 | BEARING | 1 |
21 | 673921 | TRIGGER | 1 |
22 | 673922 | HANDLE | 1 |
23 | 673923 | INLET GASKET | 1 |
24 | 673924 | RUBBER GASKET | 1 |
25 | 673925 | INLET VALVE | 1 |
26 | 673926 | INLET SPRING | 1 |
27 | 673927 | PLASTIC COVER | 1 |
28 | 673928 | O-RING | 1 |
29 | 673929 | AIR INLET | 1 |
30 | 673930 | AIR INLET SCREEN | 1 |
31 | 673931 | C-CLIP | 1 |
32 | 673932 | GASKET | 1 |
33 | 673933 | BACK COVER | 1 |
34 | 673934 | O-RING | 1 |
35 | 673935 | REGULATOR KNOB | 1 |
36 | 673936 | SPRING | 1 |
37 | 673937 | STEEL BALL | 1 |
38 | 673938 | HEX SCREW | 4 |
505 N. Railroad Ave. 33435
P.O. Box 1117 33425
Boynton Beach, FL
FOR WARRANTY INFORMATION &
WARRANTY REGISTRATION VISIT
www.taylorpneumatic.com
05/23 / ALL RIGHTS RESERVED / COPYRIGHT 2023
Ph. (561)732-1111
Fax. (561)731-4412
Toll Free 800-805-8665
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>