APTIV 35703750 Wireless Charging System User Manual

APTIV 35703750 Wireless Charging System

Description

Wireless Power Charger System

It is electromagnetic induction wireless charging system. Wireless power charger transmits 10W power to mobile. Qi (WPC) certified cell phone, which is a standard for wireless charging, or a case dedicated to wireless charging, can be used this system.

• Reference
• Qi : One of the wireless charging standards
• WPC : Abbreviation of Wireless Power Consortium
• Electromagnetic induction : When an electric current is sent through a coil (a wound-up cable), it creates a magnetic field whose action generates another electric current in a second coil

Product Features

1. Wireless charging for automobile
2. Support high speed wireless charging (10W)
3. Support coil cooling function by FAN
4. Support FOD(Foreign object detection)function
5. Support wireless charging system protection function (Over voltage, Over current, Over temperature prevention)
6. Apply Qi 1.3 ver
7. Support NFC communication for Car digital Key

Operating Band

1. Wireless Charging : 127.7Khz (±0.5KHz)
2. NFC : 13.56MHz

Connector pin description

How To Use

1. Input IGN+, BAT+ power to Wireless charger by #11, #12 pin on connector.
2. Put mobile which support wireless charging on the wireless charger
3. Check wireless charging connection.

Product Picture

Product Organization

1. PAD
2. TOP COVER
3. COIL ASSEMBLY (MP-A13)
4. COIL SPACER
5. PCB ASSEMBLY
6. SCREW
7. FAN
8. HOUSING
9. LABEL

Matching Parts

Front console or Center console in automobile

Certification statement

FCC

RF Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must follow the specific operating instructions for satisfying RF exposure compliance.

“This equipment should be installed and operated with minimum distance 15cm between the radiator & your body.”

ISED statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of

ISED RF Radiation Exposure Statement:

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End users must follow the specific operating instructions for satisfying RF exposure compliance.

CE statement

Hereby, Aptiv Korea LLC declares that the radio equipment type Single Coil WPC Type 2 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://drive.google.com/drive/folders/1GcWrd7Bkaazb Tcml9m4hbKFI4G4Fr8_S?usp=sharing

127.7 Khz
( ± 0.5Khz)| 10W ± 1W
13.56 MHz| N/A (use Near field antenna)

NOTE : THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID  THE USER’S AUTHORITY TO OPERATE THEEQUIPMENT.

Types of vehicles equipped

1. HYUNDAI : NX4 PE
2. GENESIS : JK PE

KC statement

1. Name of the person who received the conformity assessment: Korea Aptive Co., Ltd.
2. Product name: Single Coil WPC Type 2 NFC
3. Manufacturer and country of origin: Korea Aptive Co., Ltd. / Korea
4. Date of manufacture: indicated separately
5. Model name: 35703750
6. Authentication number: xxxxxxxxxxxxxxxxxxxxxx

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>