Taylor Pneumatic Tool Company T-8849A Impact Wrenches Instruction Manual

October 27, 2023
Taylor Pneumatic Tool Company

Pneumatic Tool Company T-8849A Impact Wrenches
Instruction Manual

T-8849A Impact Wrenches

Taylor Pneumatic Tool Company T-8849A Impact Wrenches

OILING INSTRUCTIONS:
OIL AFTER EACH USE WITH A FEW DROPS OF AIRTOOL OIL THROUGH THE AIR INLET. RUN FOR 1 SECOND TO COAT ALL INTERNAL PARTS.
IMPORTANT INFORMATION
FOR T-8849P
! !!!! WARRNNIINNGG !!!!!
ALWAYS USE IMPACT SOCKETS THAT HAVE A HOLE DRILLED IN THE SIDE. USING THE HOLE IN THE SIDE MAY BE THE ONLY WAY TO REMOVE  THE SOCKET FROM THE ANVIL.
INSERT A POINTED OBJECT TO PUSH PIN RETAINER DOWN AND REMOVE SOCKET.

USE 90 PSI MAXIMUM

REF # PART # DESCRIPTION QTY
1 884901
8849A01 OIL SEAL
OIL SEAL 1
2 884902
8849A02 HAMMER CASE
HAMMER CASE 1
3 884903
8849A03 BUSHING
BUSHING 1
4 884904 FRONT GASKET 1
5 884905 MOTOR HOUSING 1
6 884906
8849A06 O-RING
O-RING 1
7 884907
8849A07 ANVIL COLLAR
ANVIL COLLAR 1
8 884908

8849A08
8849L08
8849P08| ANVIL
ANVIL
ANVIL, EXTENDED
ANVIL W/PIN (SHOWN IN PHOTOS)| 1
9| 884909| HAMMER CAGE| 1
10| 884910| HAMMER PIN| 1
11| 884911| WASHER| 1
12| 884912| TRIGGER| 1
13| 884913| O-RING| 1
14| 884914| SPRING PIN| 1
15| 884915| GRIP| 1
16| 884916| HAMMER DOG| 1
17| 884917| VALVE SEAT| 1
18| 884918| VALVE STEM| 1
19| 884919| SPRING| 1
20| 884920| EXHAUST DEFLECTOR| 1
21| 884921| O-RING| 1
22| 884922| AIR INLET| 1
23| 884923| BEARING| 1
24| 884924| O-RING| 1
25| 884925| OIL SEAL| 1
26| 884926| CYLINDER| 1
27| 884927| SPRING PIN| 1
28| 884928| ROTOR| 1
29| 884929| ROTOR BLADES (6 PER SET)| 1set
30| 884930| REAR END PLATE| 1
31| 884931| BEARING| 1
32| 884932| PIN| 1
33| 884933| SPRING| 1
34| 884934| O-RING| 1
35| 884935| REAR GASKET| 1
36| 884936| REAR COVER| 1
38| 884938| BOLT| 4
39| 884939| REVERSE LEVER| 1
40| 884940| O-RING| 1
41| 884941| WASHER| 1
42| 884942| MUFFLER| 1

505 N. Railroad Ave. 33435
P.O. Box 1117 33425
Boynton Beach, FL
SEE MORE OF OUR CATALOG AT
www.taylorpneumatic.com
JUNE 2020 / ALL RIGHTS RESERVED / COPYRIGHT 2020
Ph. (561)732-1111
Fax. (561)731-4412
Toll Free (800) 805-8665

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Taylor Pneumatic Tool Company User Manuals

Related Manuals