LOVMOR W2442-E Medicine Bathroom Cabinet Wall Mounted with Soft Close Door Instruction Manual

June 16, 2024
LOVMOR

LOVMOR W2442-E Medicine Bathroom Cabinet Wall Mounted with Soft Close

Door

Product Information

Specifications

  • Model: W2442-E, W2742-E
  • Parts Included: A1 Box Side Panel – Left, A2 Box Side Panel – Right, B Box Bottom Panel, C Box Back Panel, D Face Frame, J Door Panel, K Adjustable Shelf, L Box Top Panel
  • Hardware Contents: CC Soft-close hinge x 6, 1/2 Flat Head Phillips Screw x 12, 3/4 Round Head Phillips Screw x 6, EE Corner  brace x 16, FF Adjustable shelf clip x 12, GG 1 Flat head Phillips  screw x 6, HH Rubber bumper x 4

FAQ

  • Q: What should I do if the door is not level after installation?
    • A: If the door is not level when it is installed, you can adjust it by turning the hinge screw clockwise to extend the hinge or  counterclockwise to shorten the hinge.
  • Q: Where can I get assistance with this product?
    • A: If you require assistance, please contact the customer  service team at the retailer where you purchased the product. The customer service team will be happy to assist you.

Product Usage Instructions

Caution

  • Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them. The hardware should be kept away from children when unpacking and assembling this product.
  • Two adults are recommended for assembly.

Assembly Instructions

Step 1: Box Assembly

  1. Attach the A1 Box Side Panel – Left to the A2 Box Side Panel – Right using 1/2 round head Phillips screws (x10).
  2. Attach the A2 Box Side Panel – Right to the C Box Back Panel using 1/2 round head Phillips screws (x10).
  3. Attach the C Box Back Panel to the A2 Box Side Panel – Right using 1/2 round head Phillips screws (x10).
  4. Attach the A2 Box Side Panel – Right to the A1 Box Side Panel – Left using 1/2 round head Phillips screws (x10).
  5. Attach the B Box Bottom Panel to the A2 Box Side Panel – Right  using 1/2 round head Phillips screws (x12).
  6. Attach the L Box Top Panel to the A1 Box Side Panel – Left, C  Box Back Panel, and A2 Box Side Panel – Right using 1/2 round head  Phillips screws (x12).

Step 2: Face Frame and Door Assembly

  1. Attach the D Face Frame to the A1 Box Side Panel – Left using 1 flat head Phillips screw (x6).
  2. Attach the J Door Panel to the D Face Frame using CC Soft-close hinges (x6) and 3/4 Round Head Phillips screws (x6).

Step 3: Adjustable Shelf Installation

  1. Attach the K Adjustable Shelf to the A2 Box Side Panel – Right  and A1 Box Side Panel – Left using FF Adjustable shelf clips  (x12).

Note

  • Do not tighten all the screws until all the adjacent parts have  been properly connected. Please do not throw away extra screws.
  • Please refer to the actual product for the screw hole position.

PARTS DESCRIPTION

PART DESCRIPTION
A1 Box side panel – left
A2 Box side panel – right
B Box bottom panel
C Box back panel
D Face frame
--- ---
J Door panel
K Adjustable Shelf
L Box top panel

CAUTION

  • Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them.
  • The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly.
  • Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended.
  • Do not tighten all the screws until all the adjacent parts have been properly connected. Please do not throw away extra screws.Please refer to the actual product for the screw hole position.

HARDWARE CONTENTS

TOOLS REQUIRED (NOT INCLUDED)

INSTALLATION OVERVIEW

  • Use 1/2” round head phillips screw x 10
  • Use 1/2” round head phillips screw x 10
  • Use 1/2” round head phillips screw x 12
  • Use 1/2” round head phillips screw x 12
  • 1” Flat head Phillips screw x 6
  • Use 1/2” round head phillips screw x 14
  • Use 1/2” round head phillips screw x 2
  • Adjustable shelf clip x 12
  • Use 1/2” flat head phillips screw x 6
  • 3/4” Round Head Phillips Screw x 6 Some products may have hinges pre-installed.
  • If the door is not level when it is installed, the customer will need to turn the screw clockwise to extend the hinge or counterclockwise to shorten the hinge.

Dear customers,
Thank you for purchasing our product. If you require assistance, please contact the customer service team at the retailer where you purchased the product. The customer service team will be happy to assist you.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals