LOVMOR VSD36-E Vanity Sink Drawer Base Cabinet Instruction Manual
- June 12, 2024
- LOVMOR
Table of Contents
LOVMOR VSD36-E Vanity Sink Drawer Base Cabinet
PART DESCRIPTION
PART | DESCRIPTION |
---|---|
A1 | Box side panel – left |
A2 | Box side panel – right |
B | Box bottom panel |
C | Box back panel |
D | Face frame |
E | Toe kick panel |
F | Drawer face panel |
G1 | Drawer side panel – left |
G2 | Drawer side panel – right |
H | Drawer bottom panel |
I | Drawer back panel |
J | Door panel |
CAUTION
- Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them.
- The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly.
- Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended.
- Do not tighten all the screws until all the adjacent parts have been properly connected. Please do not throw away extra screws. Please refer to the actual product for the screw hole position.
HARDWARE CONTENTS
Glide and runner profile x 4
Included: 5/8” Flat Head Phillips Screw x 20
*Two additional pieces are included as an extra
Adjustable drawer clips x 4
Included: 5/8” Flat Head Phillips Screw x 8
3/8” Flat Head Phillips Screw x 8
Soft – close hinge x 4 Be careful the length of the screws.
Included: 1/2” Flat Head Phillips Screw x 8
3/4” Round Head Phillips Screw x 4
Wood corner block x 4
Included: 1” Flat Head Phillips Screw x 8
Corner brace x 13
Included: 1/2” Round Head Phillips Screw x 52
1” Flat head Phillips screw x 4
Rubber bumper x 12
TOOLS REQUIRED (NOT INCLUDED)
INSTALLATION OVERVIEW
Dear customers,
Thank you for purchasing our product. If you require assistance, please
contact the customer service team at the retailer where you purchased the
product. The customer service team will be happy to assist you.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>