LOVMOR W3030GD-E Shaker White Wall Cabinet Instruction Manual

June 16, 2024
LOVMOR

LOVMOR-logo

LOVMOR W3030GD-E Shaker White Wall Cabinet

Product Information

Specifications

  • Model: W3030GD-E, W3330GD-E, W3630GD-E (Glass is not included)
  • Parts:
    • A1: Box side panel – left
    • A2: Box side panel – right
    • B: Box bottom panel
    • C: Box back panel
    • D: Face frame
    • J: Door panel
    • K: Adjustable shelf
    • L: Box top panel
  • Hardware Contents:
    • CC: Soft-close hinge x 4
    • EE: Corner brace x 14
    • FF: Adjustable shelf clip x 8
    • GG: 1 Flat head Phillips screw x 8
    • HH: Rubber bumper x 4
    • Included Screws:
    • 1/2 Round Head Phillips Screw x 56
    • 3/4 Round Head Phillips Screw x 4
    • 1/2 Flat Head Phillips Screw x 8

Product Usage Instructions

Caution

  • Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them. The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly.
  • Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended.
  • Do not tighten all the screws until all the adjacent parts have been properly connected. Please do not throw away extra screws. Please refer to the actual product for the screw hole position.

Installation Overview
Refer to the provided diagram for installation steps.

  1. Step 1
    Attach the A1 box side panel – left to the EE corner brace using 1/2 round head Phillips screws x 8.

  2. Step 2
    Attach the A2 box side panel – right to the EE corner brace using 1/2 round head Phillips screws x 8.

  3. Step 3
    Attach the A2 box side panel – right to the C box back panel using 1/2 round head Phillips screws x 8.

  4. Step 4
    Attach the A2 box side panel – right to the A1 box side panel – left using 1/2 round head Phillips screws x 12.

  5. Step 5
    Attach the B box bottom panel to the A2 box side panel – right, C box back panel, and A1 box side panel – left using 1/2 round head Phillips screws x 12.

  6. Step 6
    Attach the L box top panel to the A2 box side panel – right, C box back panel, and A1 box side panel – left using 1/2 round head Phillips screws x 12.

  7. Step 7a
    Attach the LL box top panel to the A2 box side panel – right, C box back panel, and A1 box side panel – left using 1/2 round head Phillips screws x 12.

  8. Step 7b
    Attach the EE corner brace to the top L box top panel using 1/2 round head Phillips screws x 12.

  9. Step 8a
    Attach the EE corner brace to the bottom B box bottom panel using 1/2 round head Phillips screws x 12.

  10. Step 8b
    Attach the A1 box side panel – left to the C box back panel and A2 box side panel – right using 1/2 round head Phillips screws x 12.

  11. Step 9
    Attach the CC soft-close hinge to the D face frame and A2 box side panel – right using 1/2 flat head Phillips screws x 4.

  12. Step 10
    Attach the D face frame to the A1 box side panel – left and A2 box side panel – right using 1/2 round head Phillips screws x 10.

  13. Step 11
    Attach the AA22 door panel to the D face frame using 1 flat head Phillips screw x 8.

  14. Step 12
    Attach the D face frame to the A1 box side panel – left using 1/2 round head Phillips screws x 2.

  15. Step 13
    Attach the K adjustable shelf clip to the L box top panel using 1/2 flat head Phillips screw x 4.

  16. Step 14
    Attach the CC soft-close hinge to the J door panel using 3/4 round head Phillips screws x 4. Some products may have hinges pre-installed. If the door is not level when it is installed, the customer will need to turn the screw clockwise to extend the hinge or counterclockwise to shorten the hinge.

  17. Step 15
    Attach the HH rubber bumper to the left stile of the glass door.

  18. Step 16
    Attach the HH rubber bumper to the right stile of the glass door.

FAQ

  1. Where can I find the height and width specifications for the door?
    The height and width information for the door is located in the Specification Manual. Please refer to that manual for specific measurements.

  2. What should I do if I require assistance with the product?
    If you require assistance, please contact the customer service team at the retailer where you purchased the product. The customer service team will be happy to assist you.

Wall Cabinet Instruction Manual
MODEL: W3030GD-E W3330GD-E W3630GD-E

Glass Is Not Included

LOVMOR-W3030GD-E-Shaker-White-Wall-Cabinet-01 \(1\)

PART DESCRIPTION
A1 Box side panel – left
A2 Box side panel – right
B Box bottom panel
C Box back panel
PART DESCRIPTION
--- ---
D Face frame
J Door panel
K Adjustable Shelf
L Box top panel

CAUTION

  • Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them.
  • The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly.
  • Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended.
  • Do not tighten all the screws until all the adjacent parts have been properly connected. Please do not throw away extra screws.Please refer to the actual product for the screw hole position.

HARDWARE CONTENTS

  • CC Soft- close hinge x 4
  • Be careful the length of the screws.
  • EE Corner brace x 14
  • FF Adjustable shelf clip x 8
  • GG 1” Flat head Phillips screw x 8
  • HH Rubber bumper x 4

TOOLS REQUIRED (NOT INCLUDED) LOVMOR-W3030GD-E-Shaker-White-Wall-
Cabinet-01 \(9\)

INSTALLATION OVERVIEW

LOVMOR-W3030GD-E-Shaker-White-Wall-Cabinet-01 \(10\)

LOVMOR-W3030GD-E-Shaker-White-Wall-Cabinet-01 \(11\)

LOVMOR-W3030GD-E-Shaker-White-Wall-Cabinet-01 \(12\)

LOVMOR-W3030GD-E-Shaker-White-Wall-Cabinet-01 \(13\)

LOVMOR-W3030GD-E-Shaker-White-Wall-Cabinet-01 \(14\)

LOVMOR-W3030GD-E-Shaker-White-Wall-Cabinet-01 \(15\)

LOVMOR-W3030GD-E-Shaker-White-Wall-Cabinet-01 \(16\)

LOVMOR-W3030GD-E-Shaker-White-Wall-Cabinet-01 \(17\)

LOVMOR-W3030GD-E-Shaker-White-Wall-Cabinet-01 \(18\)

LOVMOR-W3030GD-E-Shaker-White-Wall-Cabinet-01 \(19\)

If the door is not level when it is installed, the customer will need to turn the screw clockwise to extend the hinge or counterclockwise to shorten the hinge.

LOVMOR-W3030GD-E-Shaker-White-Wall-Cabinet-01 \(22\)

GLASSDOOR CUTOUT SPECIFICATIONS

  • Height Configuration:
    Door Height* – (2 x Door Style Rail Width) + 1½”

  • Width Configuration:
    Door Width* – (2 x Door Style Stile Width) + 1½”

Door Style Rail Width Stile Width

Shaker 2 ¾” 2 ¾”
Traditional 3″ 3″
Cameo 3″ 3″

*Door height and width information is located in the Specification Manual.

DISCLAIMER

  • This formula is to be used as an estimation tool only.
  • We recommend that physical measurements are taken prior to ordering your inserts.
  • We cannot guarantee the exact dimensions determined when using the formula provided.

Dear customers,
Thank you for purchasing our product. If you require assistance, please contact the customer service team at the retailer where you purchased the product. The customer service team will be happy to assist you.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals