LOVMOR U189024-E Pantry Modern Tall Storage Cabinet Instruction Manual
- June 15, 2024
- LOVMOR
Table of Contents
LOVMOR U189024-E Pantry Modern Tall Storage Cabinet Instruction Manual
PART DESCRIPTION
PART | DESCRIPTION |
---|---|
A1 | Box side panel – left |
A2 | Box side panel – right |
B | Box bottom panel |
C | Box back panel |
D | Face frame |
E | Toe kick pane |
J | Door panel |
K | Adjustable Shelf |
L | Door panel |
Q | Fixed shelf |
CAUTION
-
Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them.
-
The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly.
-
Follow the instructions in the instruction manual carefully and strictly to ensure that the
product is assembled and operates as intended. -
Do not tighten all the screws until all the adjacent parts have been properly connected.
Please do not throw away extra screws. Please refer to the actual product for the screw hole position.
HARDWARE CONTENTS
-
Soft- close hinge x 5 Be careful the length of the screws.
-
Corner brace x 17
-
Adjustable shelf clip x 20
-
1” Flat head Phillips screw x 6 H
-
Rubber bumper x 4
TOOLS REQUIRED (NOT INCLUDED)
INSTALLATION OVERVIEW
If the door is not level when it is installed, the customer will need to turn
the screw clockwise to extend the hinge or counterclockwise to shorten the
hinge
To reverse the door, unscrew the 3/4″ round head Philips screws from each
hinge and remove the door panel. Then, reverse the door panel and drill the
3/4” round head Philips screws to each hinge through the pre-drilled holes to
tighten the hinges with cabinet face frame.
Some products may have hinges pre-installed.
Dear customers,
Thank you for purchasing our product. If you require assistance, please
contact the customer service team at the retailer where you purchased the
product. The customer service team will be happy to assist you.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>