TRU COMPONENTS 2521201 Digital RGB LED Flexi-Strip User Guide
- June 10, 2024
- TRU COMPONENTS
Table of Contents
Quick Start Guide
Digital RGB LED Flexi-Strip
Item no: 2521201
****www.conrad.com/downloads
Description
The product is a flexible RGB LED strip that has control circuits and LEDs
incorporated in 5050 chips.
Features include:
- 5050 chips (control circuit and RGB LEDs)
- Data transmission rate: max. 800 kbit/s
- NZR communication mode
- 16,777,216 colours (256 grey levels)
- Refresh frequency: 400 Hz/s
- Continuous transmission of signal breakpoint
- Signal waveform shaping
- Serial cascade interface
- Built-in power-on reset and brown-out reset circuits
- Reverse protection
Delivery contents
- Digital RGB LED Flexi-Strip
- Quick start guide
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Safety instructions
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
Pinout
| Pin | Description |
|---|---|
| +5V | Power supply pin |
| DO | Control data output |
| Din | Control data input |
| GND | Ground |
Technical data
Input voltage …………………………… 3.5 – 5.3 V/DC
LED count………………………………. 60
Operating temperature …………… -25 to 60 °C
Storage temperature ………………. -40 to +120 °C
Dimensions (L x W x H) ……….. 1000 x 9.5 x 2.7 mm
Weight ……………………………………. 37.7 g
LED specifications:
| Colour | Type | Wave length | Brightness | Voltage |
|---|---|---|---|---|
| Blue | 13CBAUP | 465 — 467 nm | 180 — 200 mcd | 3.0 — 3.4 V |
| Green | 13CGAUP | 522 — 525 nm | 660 — 720 mcd | 3.0 — 3.4 V |
| Red | 10R1MUX | 620 – 625 nm | 390 – 420 mcd | 2.0 — 2.2 V |
Disposal
This symbol must appear on any electrical and electronic equipment placed on
the EU market. This symbol indicates that this device should not be disposed
of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and
accumulators, which are not enclosed by the WEEE, as well as lamps that can be
removed from the WEEE in a non-destructive manner, must be removed by end
users from the WEEE in a nondestructive manner before it is handed over to a
collection point.
Distributors of electrical and electronic equipment are legally obliged to
provide free take-back of waste. Conrad provides the following return options
free of charge (more details on our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be
disposed of.
It should be noted that different obligations about the return or recycling of
WEEE may apply in countries outside of Germany.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirsch au (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited. This publication reflects the technical status at the
time of printing.
Copyright by Conrad Electronic SE.
*2521201_V1_0522_jh_mq_en 9007199753481867-2 I2/O1
Documents / Resources
| TRU
COMPONENTS 2521201 Digital RGB LED Flexi-
Strip
[pdf] User Guide
2521201 Digital RGB LED Flexi-Strip, 2521201, Digital RGB LED Flexi-Strip, RGB
LED Flexi-Strip, LED Flexi-Strip, Flexi-Strip, Strip
---|---