LOVMOR DCW2430-E Diagonal Corner Wall Cabinet Instruction Manual
- May 15, 2024
- LOVMOR
Table of Contents
Wall Diagonal Corner Cabinet
Instruction Manual
MODEL: DCW2430-E
DCW2430-E Diagonal Corner Wall Cabinet
PART | DESCRIPTION |
---|---|
B | Box bottom panel |
C | Box back panel |
D | Face frame |
J | Door panel |
K | Adjustable shelf |
L | Box top panel |
R1 | Box side panel – left |
R2 | Box side panel – right |
S1 | Box side panel – left |
S2 | Box side panel – right |
CAUTION
- Be sure to carefully remove all parts from the carton and ensure that there are no damages to any of them.
- The hardware should be kept away from children when unpacking and assembling this product. Two adults are recommended for assembly.
- Follow the instructions in the instruction manual carefully and strictly to ensure that the product is assembled and operates as intended.
- Do not tighten all the screws until all the adjacent parts have been properly connected.
- Please do not throw away extra screws.Please refer to the actual product for the screw hole position.
HARDWARE CONTENTS
TOOLS REQUIRED (NOT INCLUDED)
INSTALLATION OVERVIEW
If the door is not level when it is installed, the customer
will need to turn the screw clockwise to extend the hinge or counterclockwise
to shorten the hinge. Some products may have hinges
pre-installed.
To reverse the door, unscrew the 3/4″ round head phillips screws from each
hinge and remove the door panel. Then, reverse the door panel and drill the
3/4” round head phillips screws to each hinge through the pre-drilled holes to
tighten the hinges with cabinet face frame. Dear
customers,
Thank you for purchasing our product. If you require assistance, please
contact the customer service team at the retailer where you purchased the
product. The customer service team will be happy to assist you.