Panasonic E12RKUA Heat Pump Instruction Manual
- June 13, 2024
- Panasonic
Table of Contents
Panasonic E12RKUA Heat Pump
Product Information
| Section | Content |
|---|---|
| Inserting the batteries | Pull out the back cover of the remote control. Insert |
AAA or
R03 batteries (can be used for approximately 1 year). Close the
cover.
Clock setting| Press CLOCK, set the time, and confirm.
Table of contents| Accessories: Pages 4-5; Basic operation: Pages 6-7; Indoor
and
outdoor unit information: Page 8; Remote control information: Page
9; Troubleshooting: Pages 10-11; Non-serviceable criteria: Page
12.
Product Usage Instructions
Inserting the batteries
- Pull out the back cover of the remote control.
- Insert AAA or R03 batteries. Ensure correct polarity.
- Close the cover.
Clock setting
- Press the CLOCK button.
- Set the desired time using the appropriate controls.
- Confirm the set time.
Basic operation
Select the desired mode by pressing the corresponding button:
- AUTO
- HEAT
- FAN
- DRY
- COOL
To start or stop the operation, press the appropriate button.
Selecting the desired temperature
Use the temperature controls to set the desired temperature.
Indoor and outdoor unit
Refer to page 8 for information about the indoor and outdoor units.
Remote control
Refer to page 9 for information about the remote control.
Troubleshooting
Refer to pages 10-11 for troubleshooting tips.
Non-serviceable criteria
Refer to page 12 for information on non-serviceable criteria.
Inserting the batteries
Pull out the back cover of remote control Insert AAA or R03 batteries (can be
used ~ 1 year) Close the cover
Clock setting
Press CLOCK Set the time Confirm
Table of contents Accessories
4-5 6-7
8 9 10-11 12
Basic operation
Select the desired mode AUTO HEAT
FAN DRY COOL Start/stop the operation
Select the desired temperature
26ft/8m
CAUTION Indoor unit and outdoor unit
Remote control
Symptom
Cause
Symptom
Check
NON SERVICEABLE CRITERIAS
The unit stops and the TIMER indicator blinks.
Abnormality/Protection control
Abnormality/Protection control
Information for Users on Collection and Disposal of Old Equipment and used
Batteries [Information on Disposal in other Countries outside the European
Union] Note for the battery symbol (bottom two symbol examples):
Pb Models Number
Federal Communications Commission Interference Statement
Industry Canada Notice
Insertion des piles
Retirer le couvercle arrière de la télécommande Mettre en place des piles AAA
ou R03 (durée de vie d’environ 1 an) Remettre le couvercle en place
Réglage de l’heure
Appuyer sur CLOCK Régler l’heure Confirmer
Table des matières
16 et 17 18 et 19
20 21 22 et 23 24
Accessoires
Opération de base
Sélectionner le mode voulu AUTO HEAT
FAN DRY COOL Mettre l’appareil en/hors marche
Régler la température souhaitée
8 m/26 pi
MISE EN GARDE Unités intérieure et extérieure
Télécommande
Problème
Cause
Problème
Vérification
SITUATIONS NÉCESSITANT L’INTERVENTION D’UN TECHNICIEN
L’appareil arrête de fonctionner et le voyant TIMER clignote.
Anomalie/contrôle de protection
Anomalie/contrôle de protection
Avis aux utilisateurs concernant la collecte et l’élimination des piles et des
appareils électriques et électroniques usagés
[Information relative à l’élimination des déchets dans les pays extérieurs à
l’Union européenne] Note relative au pictogramme à apposer sur les piles (voir
les deux exemples ci-contre): Pb Numéros des modèles
Avis de la FCC
Avis d’Industrie Canada
Printed in Malaysia Imprimé en Malaisie
F569978