Taylor T-7002A Low Speed Tire Buffer Instructions
- June 16, 2024
- TAYLOR
Table of Contents
Taylor T-7002A Low Speed Tire Buffer
OILING INSTRUCTIONS
OIL AFTER EACH USE WITH A FEW DROPS OF AIRTOOL OIL THROUGH THE AIR INLET. RUN
FOR 1 SECOND TO COAT ALL INTERNAL PARTS.
USE 90 PSI MAXIMUM
| REF # | PART # | DESCRIPTION | QTY |
|---|---|---|---|
| 1 | 7002A01 | INLET BUSHING | 1 |
| 2 | 7002A02 | O-RING | 1 |
| 4 | 7002A04 | EXHAUST | 1 |
| 5 | 7002A05 | HOUSING | 1 |
| 6 | 7002A06 | THROTTLE LEVER | 1 |
| 7 | 7002A07 | PIN | 1 |
| 8 | 7002A08 | VALVE BUSHING | 1 |
| 9 | 7002A09 | VALVE | 1 |
| 10 | 7002A10 | O-RING | 1 |
| 11 | 7002A11 | SPRING | 1 |
| 12 | 7002A12 | AIR REGULATOR | 1 |
| 13 | 7002A13 | O-RING | 1 |
| 14 | 7002A14 | O-RING | 1 |
| 15 | 7002A15 | VALVE CAP | 1 |
| 16 | 7002A16 | BEARING | 2 |
| 17 | 7002A17 | REAR END PLATE | 1 |
| 18 | 7002A18 | BALL | 3 |
| 19 | 7002A19 | ROTOR | 1 |
| 20 | 7002A20 | ROTOR BLADES (4 PER SET) | 1set |
| 21 | 7002A21 | CYLINDER | 1 |
| 22 | 7002A22 | FRONT END PLATE | 1 |
| 23 | 7002A23 | IDLER GEAR | 3 |
| 24 | 7002A24 | SPINDLE | 1 |
| 25 | 7002A25 | BEARING | 2 |
| 26 | 7002A26 | WASHER | 1 |
| 27 | 7002A27 | RING GEAR | 1 |
| 28 | 7002A28 | GEAR CAP | 1 |
| 42 | 7002A42 | O-RING | 2 |
| 43 | 7002A43 | SPINDLE | 1 |
| 44 | T-7002A44 | METAL WHEEL | 1 |
| 45 | 7002A45 | WASHER | 1 |
| 46 | 7002A46 | NUT | 1 |
CUSTOMER SERVICES
505 N. Railroad Ave. 33435 P.O. Box 1117 33425 Boynton Beach, FL FOR WARRANTY
INFORMATION & WARRANTY REGISTRATION VISIT
www.taylorpneumatic.com
” ‘/23 / ALL RIGHTS RESERVED / COPYRIGHT 2023
Ph. (561)732-1111
Fax. (561)731-4412
Toll Free 800-805-8665
References
Read User Manual Online (PDF format)
Loading......