Taylor T-#24B Chipping Hammer Instructions
- June 16, 2024
- TAYLOR
Table of Contents
Taylor T-#24B Chipping Hammer
OILING INSTRUCTIONS
OIL AFTER EACH USE WITH A FEW DROPS OF AIR TOOL OIL THROUGH THE AIR INLET. RUN FOR 1 SECOND TO COAT ALL INTERNAL PARTS.
OPTIONAL ACCESSORIES
-
T-7516 .680/.580 HEX
QUICK CHANGE BALL TYPE RETAINER -
T-23451 HOSE SWIVEL 3/8” NPT
FITS ANY TOOL WITH 3/8” AIR INLET
CHISELS ARE NOT INCLUDED WITH THE TOOL:
-
T-1101W2 : WIDE CHISEL
-
T-1103 : BUSHING TOOL
-
T-1108 : COLD CHISEL
-
T-1180 : MOIL POINT
REF #| PART #| DESCRIPTION
HANDLE ASSEMBLY (PARTS 1-9)
TRIGGER
BUSHING
VALVE STEM
SPRING
O-RING
AIR INLET 3/8 NPT
PIN
O-RING
DISC VALVE
VALVE SEAT
VALVE SEAT BUMPER DOWEL PIN
2 PISTON
3 PISTON
4 PISTON
2 CYLINDER W/.680 BUSHING
3 CYLINDER W/.680 BUSHING
4 CYLINDER W/.680 BUSHING
| QTY
---|---|---|---
1| #2344B01A| 1
2| #2344B02| 1
3| #2344B03| 1
4| #2344B04| 1
5| #2344B05| 1
6| #2344B06| 1
7| #2344B07| 1
9| #2344B09| 1
10| #2344B10| 1
11| #2344B11| 1
12| #2344B12| 1
13| #2344B13| 1
14| #2344B14| 2
15| #24B15| 1
15| #34B15| 1
15| #44B15| 1
16A| #24B16A| 1
16A| #34B16A| 1
16A| #44B16A| 1
16H| #24B16H| #2 CYLINDER W/.580 HEX| 1
16H| #34B16H| #3 CYLINDER W/.580 HEX| 1
16H| #44B16H| #4 CYLINDER W/.580 HEX| 1
17| #2344B17| ROUND BUSHING| 1
17H| #2344B17H| HEX BUSHING| 1
18| #2344B18| ABSORBER RING| 1
19| #2344B19| CYLINDER FLANGE| 1
20| #2344B20| BOLT| 4
21| #2344B21| VIBRATION SPACER| 4
22| #2344B22| WASHER| 4
23| #2344B23| NUT (NYLOC)| 4
24| #23434N3| LOCKCOIL SPRING| 1
25| #23431N3| SLEEVE-RETAINER| 1
26| #234B26| DEFLECTOR (#2 & #3)| 1
26| #44B26| DEFLECTOR (#4)| 1
| OPTIONAL ACCESSORIES
---|---
T-7516| QUICK CHANGE RETAINER
T-#23451| HOSE SWIVEL 3/8” NPT
Customer Support
505 N. Railroad Ave. 33435
P.O. Box 1117 33425
Boynton Beach, FL
FOR WARRANTY INFORMATION & WARRANTY REGISTRATION VISIT
www.taylorpneumatic.com
Ph. (561)732-1111
Fax. (561)731-4412
Toll Free 800-805-8665
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>