Furniture of America Unseen Modern Wood 2 Drawer Nightstand Instruction Manual
- June 16, 2024
- Furniture of America
Table of Contents
Furniture of America Unseen Modern Wood 2 Drawer Nightstand
ASSEMBLY INSTRUC1Tl1ONS
TOOLS REQUIRED
Phillips Screwdriver
(Not Included)
2- People Recommended
The Assembly Rating is a 5-point system showing the level of effort needed to assemble a specific product.
CHECK BEFORE STARTING
Are you missing anything?
Double-check all parts, hardware and accessories listed are all acccounted
for.
Should we send any replacements?
Are there any irregularities or flaws in the parts? We can send replacements!
Check out our Quick Tips!
We recommend reviewing the pre-assembly handouts. Even experts need a
refresher now and then!
PrepTime!
Please review the assembly instructions and all diagrams prior to assembling.
PRE-ASSEMBLY
INTRODUCTION
We understand building ready-to-assemble furniture can be a challenging
experience for some. To help avoid confusion, we have provided some helpful
tips that may speed up the process.
Teamwork
ALWAYS have at least two people to help with transporting and assembling the
product to avoid potential injury and/or damage.
Suitable Location
Assembling near the area of the intended location is highly recommended.
Sufficient Space
Make sure you have enough space to move around during the assembly.
Avoid Scratches
Use cardboard, blankets or a carpeted area while assembling furniture to
prevent to prevent scratches and damages.
Flat Surface
Make sure the furniture rests on a flat and level surface with each leg evenly
touching the floor.
ASSEMBLYAND CARE ADVICE
FAILURE TO FOLLOW THE GUIDELINES BELOW MAY
RESULT IN INJURY AND/OR PROPERTY DAMAGE.
Position each part correctly and insert screws or bolts into their respective holes.
Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and/or bolts, may require hand tools to avoid causing damage during assembly.
Turn clockwise to tighten and only tighten when step is completed or when instructed to do so.
Save the instructions and store any supplied tools for later maintenance.
After two weeks, check and tighten any loose hardware and repeat again every six months thereafter.
IT IS THE USER’S RESPONSIBILITY TO MAINTAIN THE FURNITURE. THE HARDWARE MAY
LOOSEN OVER TIME AND MAY CAUSE THE FURNITURE TO BE WOBBLY AND UNABLE TO
SUPPORT ITS
INTENDED WEIGHT CAPACITY. THIS MAY LEAD TO COLLAPSE AND MAY CAUSE SERIOUS
INJURY.
NIGHTSTAND
- Please keep instructions for future reference.
- Check the quantity and irregularity of parts and hardware before you start.
PARTS
@1pc
Night Stand
HARDWARE
ASSEMBLY INSTRUCTIONS
Part@) x 1pc
Remove handles from the inside of the drawers and attach to the front.
ASSEMBLY COMPLETED
Please ensure the furniture rests on even and flat surface. If the product
wobbles or feels loose, double-check all bolts and/or screws are properly
tightened and secured.
Keep this handy!
Please re1ain this instruction manual and any order-related information for
future reference.
Lift, don’t drag!
To avoid damage to product please always LIFT the product when transporting cl
adjusting the placement.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>