2E PPS24256 Portable Power Station User Guide

2E PPS24256 Portable Power Station

Technical Specifications

• Battery type and Capacity: LiFePO4 2560Wh/51.2V/50000mAh
• Cycle life: 2000 times
• AC Input: 220-240V, 50Hz (2000W Max)
• MPPT Input: 10-60V 13A (400W Max)
• 2x USB Type-C: 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 5A (100W Max)
• 4x USB-A: 5V 3A, 9V 2A, 12V 1.5A(single 18W Max, double 15W Max)
• 4x DC 12V 10A (120W Max)
• 2x AC: 210-230V, 50 Hz, 2400 W Max
• Output Waveform: Pure Sine Wave
• Dimension: 374 x 265 x 345 mm
• Weight: 26 kg

About

Thank you very much for purchasing our multifunctional portable mobile energy storage system. It has a variety of DC voltage outputs, different ports such as USB, TYPE-C, DC5521, cigarette lighter, etc. Itis also equipped with 3W LED lighting and a display that can display the battery status and power. Suitable for a variety of different devices and scenarios, such as refrigerator, induction cooker, oven, electric fans, televisions, drones, mobile phones, tablets, laptops, desktop, computers, small printers, various lamps, small fish tanks, photographic equipment, electric scooters, etc.
Please read this user manual carefully before using this product and keep it for future reference.

Technical Specifications

Battery type and Capacity:| LiFePO4 2560Wh/51.2V/50000mAh

Cycle life: ³2000 times

---|---
Input| AC Input: 220-240V, 50Hz (2000W Max); MPPT Input: 10-60V 13A (400W Max);

USB Output

| 2x USB Type-C: 5V 3A, 9V 3A, 12V 3A, 15V 3A, 20V 5A (100W Max)
4x USB-A: 5V 3A, 9V 2A, 12V 1.5A(single 18W Max, double 15W Max)
DC Output| 4x DC 12V 10A (120W Max)
Car Port| 12V 10A (120W Max)

AC Output

| 2x AC: 210-230V, 50 Hz, 2400 W Max
Output Waveform: Pure Sine Wave
Operation Temperature| -10°C~40°C
Dimension| 374 x 265 x 345 mm
Weight About| 26 kg

Package contents:ical Specifications

• 1x Portable Power Station
• 1x AC Charging Cable
• 1x Cigarette lighter to XT60 Adapter
• 1x Cigarette lighter to DC5521 Adapter
• 1x User guideical Specifications

Identification of parts

Front view

Display

Side view

Rear view

Precautions for use

1. Please read all the safety warnings before use and always follow the basic precautions when using this product. Warranty does not cover damages caused by failure to follow instructions.
2. When using the device for the first time, it is recommended to fully charge it in order to avoid inconveniences during use due to lack of power.
3. Close supervision is required when using this product around children to reduce the risk.
4. Charge the product at least every three months to preserve the battery life.
5. Low temperature may affect the battery capacity of the product, the product can be charged in the temperature range of 0 to 40°C, and used in the temperature range of -10 to 40°C.
6. Place, charge and store the product in a well-ventilated place.
7. Wipe the product clean with a dry cloth.
8. When the product is not in use, unplug the power cord from the product outlet.

Safety warning

1. Use of accessories recommended or sold by non-professional product manufacturers may result in electric shock or equipment damage.
2. Do not use damaged wires or plugs or damaged output cables with this product.
3. Never restrict the ventilation of the product.
4. Do not disassemble the product. Doing so may result in unpredictable risks such as fire, explosion, or electric shock.
5. Avoid exposing the product to rain or using the product in humid environment.
6. Do not use or store the product in a high temperature environment (direct hot sunlight or hot car interior), otherwise the internal battery may overheat, catch fire or fail, shorten its lifespan, and incur other risks.
7. In case of fire, use dry powder fire extinguishers for this product. Do not use water fire extinguisher, which may cause electric shock.
8. Avoid getting dust or foreign objects inside the device, otherwise it may easily cause damage to its internal components.

Button functions

USB ports
AC|

Power on

|

• Short press: turn on/off the AC output. The buzzer will sound.
• Long press: turn on/off the buzzer (the buzzer is on by default). The buzzer will sound.

WIFI/BT/IoT| Power on| Long press: reset WiFi/BT settings
DC| Power on| Long press: turn off the front lighting. The buzzer will sound.
LED|

Power on

|

• Short press: Turn on the light (brightness 1-2-3)> Strobe > SOS > Turn off the light
• Long press: turn off the light. The buzzer will sound. Auto turn off the light: after 2 hours without pressing any button.

Power + LED| Power on|

• Short press: exit charging mode
• Long press (3 seconds): system reset

Power + AC| Power on| Power Long press + AC Short press: switch the AC output voltage. Voltage display flashes.
AC| Power on| Long press: turn on/off the buzzer
AC + LED| Power on| Long press: view the system software version
Other function|

/

|

1.  Auto turn off the backlight: no operations for 30 seconds.
2. Auto turn off USB-A and TYPE-C port: no load for 5 minutes.
3. Auto turn off DC and AC output: small/no current for 4 hours.
4. Auto standby: 8 minutes without load.

Note. When the screen backlight is off, first press any button to turn on the backlight, and then activate the function with the corresponding button.

System fault cord

output, otherwise the system will intervene.
Er 11| BAT UVP : Battery undervoltage warning
Er 12| BAT LOW : Battery low voltage warning
Er 14| BMS: Communication error

Using the Power Station

Powering DC appliances
Turn on the power switch, press the DC/Car Charger Output ON/OFF button, the DC socket and the car charger will start to work and output 12V. Connect the electrical appliance to the desired power interface.

Protection Mode
Short circuit/over power protection: If the DC output has a short circuit or the output is overpowered (load > 120W), the device will turn off the DC output for protection. After troubleshooting, turn the DC output back on to power the device.
The DC output voltage range of this device is 11.4V-12.6V, and the maximum output current is 10A

Powering AC appliances

Turn on the power switch, connect the device’s power plug to the portable power station’s AC port, then press the AC button and the device will supply power to the device.
Warning. Different countries have different interface specifications and voltage standards. Before use, be sure to carefully check whether the output characteristics of the product match the input characteristics of the electrical appliance, otherwise it may cause damage to the device.

(When the AC outlet is not in use, turn off the AC switch in time to save power.)

Protection Mode

Circuit/Over Power Protection: If the AC output is shorted or the load power exceeds 2400W, the device will turn off the AC output for protection. Once the problem is corrected, turn on the AC output to supply power to the device.

Connecting the expansion power cable

Note : expansion power cable and combine box are sold separately.

Powering USB digital devices

Turn on the power switch, connect the USB cable of the digital device to the USB interface of this product, turn on the USB output to supply power to the digital device. If the power does not start, plug and unplug the USB cable again.

Charging the product

Cold Weather
Cold weather can influence battery capacity. In sub-zero temperature (<0°C), you may be able to discharge the product, but you should not charge it. Otherwise, the battery of the product would be greatly damaged and the capacity may not even be recovered.

Attention : The operating environment should meet all requirements in this manual. Make sure that the air inlet/outlet is not blocked

Charging with AC power cord
Connect the product to a household AC outlet using the AC power cord. If the battery indicator icon on the product display blinks, the product is charging. The charge level is indicated on the LCD display. When it reaches 100%, the product is fully charged. Remove the AC power cord from the AC outlet in time.

Note. This product supports 2000W maximum input power.

Charging with a solar panel

1. Place the solar panel in a place with strong direct sunlight.
2. Connect the output of the solar panel to the charging input of this product. If the battery indicator icon on the product display blinks, the product is charging. The charge level is indicated on the LCD display. When it reaches 100%, the product is fully charged.

Using the app

Search «tuya smart» app in App Store (for iOS devices) or Google Play (for Android devices), then download this app to control the device remotely via Wi-Fi or Bluetooth

1. Step 1:
   Press and hold the WIFI/BT/IOT button on the power station for 3 seconds until the WiFi icon flashes. Turn on WIFI and Bluetooth on your phone. Open «Tuya Smart» app and click «Add device».

2. Step 2:
   If you are using WiFi, connect to your 2.4G WiFi network. Chose 2E SYAYVO from the device list. Enter the password and activate the communication function of your device for data synchronization.

After connecting successfully, you will be able to control your device in the WiFi environment. You can also control it via Bluetooth in the absence of WiFi.

Application scenario

1. Outdoor
   Car equipment: car fridge, car vacuum cleaner, pump and another car equipment; Camping equipment: garden electric tools (power tools such as blowers, lawnmowers, electric drills, electric saws), BBQ grills, LED lights, etc.

2. Indoor
   Refrigerator, kitchen devices such as kettle, toaster, blender, coffee maker, gas boiler, laptops, phones, lighting, etc.

Examples of loads

1. Most electrical appliances in the market apply to the specifications of 12V/30A (XT60
   or SPC45), 12V/10A, cigarette lighter, USB-A, and USB-C output ports of charger. But still, the charging of some products may activate the over- current protection if it generates an instantaneous high current at the moment of starting.

2. Charger can power electrical products with 2400W or less rated power. Though the figure is under 2400W, overload protection will still be activated when the appliance generates a massive instantaneous start-up power. Therefore, it’s recommended to apply charger to electrical products with lower-rated power.

3. If an output over-current, overload, or short circuit occurs, device will turn off the corresponding output port. Then it will automatically start again at an interval of 15s).
   If the output repeatedly stops, turn the equipment off. Please get in touch with the seller or maintenance group first for professional help.

4. When the battery level drops to 0%, the DC and AC output will automatically turn off. Please check the battery level before using device to protect and enhance battery cycle life.

5. This device supports charging and discharging simultaneously, and please keep the equipment laid flat during use, charging, and discharging.

Estimation of operating time

2560 Wh x DOD x n ÷ (load power) = operating time
Note : DOD is the battery discharge depth, n is the local inverter efficiency. And the units of load power and charging time are Watt and Hour. DOD=80%, n =90%

Elimination of the most common problems during use

connected to the charger. Check for poor contact in the connections.
The contact is good, but the charging indicator is not on.| Turn on the output port button. If there is still no result, the charger might be broken, please contact after-sales service.
 The charging indicator is on, device is still not charging.| The device might be broken, please contact device after-sales service.
Charger does not output power| The equipment is not properly connected to the charger.| Make sure the equipment is properly connected to the charger. Check for poor contact in the connections.
The output port switch is not turned on.| Press the output port button.
Low output power.| Charge the charger.
Still no output power after eliminating 1.2.3 points.| The charger might be broken, please contact after-sales service.
Charger interrupts power output| The rated power or instantaneous starting power of the equipment used is greater than the power of the product.| Select higher power energy storage products or try the parallel connection to deliver power from 2 power stations.
The alarm symbol appears on the display screen. A beep sounds and the product automatically

turns off the output.

| A short circuit has occurred in the equipment. Please check the wires and connections.
Power output still interrupts after eliminating 1.2.points.| The charger or your device might be broken, please contact after-sales service.

FAQ

1. Can this product be carried on a plane?
   No, because this product contains high capacity battery. In accordance with international air transport standards, the transportation of products with batteries with a capacity of more than 100 Wh is prohibited.

2. If the power of the equipment is within the rated output of the product, can it be used?

   • If the power consumption of the product is less than 120W, it can be used at the same time with other products.
   • products with a rated or peak power that exceeds the allowable parameters cannot be used with this charger

3. Why does the device make a sound while using it?
   The product uses an air-cooling system, and the built-in fan is better conducive to heat dissipation. A little noise during operation is normal.

4. Is it normal for the charger to get warm while charging?
   Charger heating when charging is a normal phenomenon, the standard temperature of the device when charging is in line with national safety standards, you can rest assured to use it!

Warranty

• The warranty period is one year.
• The warranty period starts from the date of purchase by the consumer.

The warranty does not cover the following cases:

1. Cosmetic damages, scratches on the body;
2. Disassembly and repair by non-authorized staff without permission;
3. Product performance failure caused by human factors.
4. Damage caused by irresistible factors such as natural disasters, lightning and accidents.

References

• Компания ERC: Сервис-центр(СЕРВІСНИЙ ЦЕНТР)
• Декларації | ERC Ukraine

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>