YNF Mini Smart Plug User Guide
- June 16, 2024
- YNF
Table of Contents
YNF Smart Home
Quick Start Guide
Mini Smart Plug
Step 1: Plug in Smart Plug
Plug your smart plug into a power outlet. Step 2: Put it in the pairing
mode
- Pairing mode: Blue LED blinking
- If not, press and hold the button for 8 seconds to reset the plug to pairing mode.
Step 3: Voice Pairing
Say to the Echo:“ Alexa, discover device.”
(No APP is required in this process.) 
Step 4: Voice Control your device
- Alexa, turn on/off the plug.
- Alexa, turn on/off the plug at 4:15 pm.
- Alexa, turn on/off the plug after 3 mins.
- Alexa, turn on the plug at 5 pm everyday.
- Alexa, rename the plug to “apple”.
Echo Can’t Discover Your Smart Plug
To resolve most discovery issues with your Smart Plug, try these steps
- Check that your Alexa Echo have the latest software version.
- Make sure that your Echo are connected to the Wi-Fi network.
- Check that your paired plug is within 30 ft (9 m) of your Alexa Echo.
- Reset your Smart Plug: press and hold the button on the side of the plug for 5 seconds. Then set up smart plug again.
My plug is not responding to vocal commands or showing as ‘unresponsive’ in the Alexa app. What can I do?
- First, refresh the page in the app that shows the plug.
- If this doesn’t work, repower the smart plug, wait a few seconds, then do voice control again.
- Reset your Smart Plug: press and hold the button on the side of the plug for 5 seconds.
Then set up smart plug again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>