EARTHWORKS AUDIO SR5314 Premium Capsule for Wireless Microphones User Manual

: June 4, 2024
: EARTHWORKS AUDIO

Table of Contents

SR5314
- Thank you for purchasing the Earthworks SR5314 Capsule!
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EARTHWORKS AUDIO Premium Capsule Wireless Microphones

SR5314

PREMIUM CAPSULE FOR WIRELESS MICROPHONES

For more information, please visit www.earthworksaudio.com or call 1-603-654-2433.

Thank you for purchasing the Earthworks SR5314 Capsule!

YOUR PURCHASE INCLUDES

1 SR5314 Wireless Capsule
1 Fabric Bag

COMPATIBILITY

The SR5314 is designed for full compatibility with Sennheiser wireless handheld transmitters in the Digital 9000 and 6000 Series, 2000 Series, Evolution G4 500, 300 and 100 Series.

PROPER MAINTENANCE

To guarantee your microphone provides years of performance, follow these guidelines:

Avoid extreme heat, condensing humidity and dust
Rough handling may damage the microphone capsule even if no visible marks are left.
When not mounted to a wireless transmitter keep the SR5314 in its protective fabric bag.

CLEANING THE SR5314

All cleaning should be done with either alcohol wipes, or with a small amount of alcohol on a soft cloth. Make sure any cleaned elements are completely dry before reassembling.

First unscrew the top half of the microphone (the basket).
Cleaning the External Stainless Screen – unscrew the external stainless screen.
Cleaning the Dual Stainless Pop Filter – both sides can be cleaned, but most of the dirt will be on the side facing the external screen.
Internal Stainless Windscreen – it would be extremely rare if the internal windscreen should ever need cleaning, but it may be cleaned if the need arises. As this windscreen is very close to the microphone element, be extra careful that the windscreen is dry before reassembly.

EXPANDED VIEW OF THE SR5314

EARTHWORKS AUDIO Premium Capsule Wireless Microphones
01

TROUBLESHOOTING

If you encounter issues while using your Earthworks Audio capsule, please make sure that:

Your wireless transmitter system is connected to an active power supply.
Your capsule is crewed tightly onto the microphone body.
Your connection to the wireless transmitter system is active and strong.
The microphone is positioned at an appropriate distance from the sound source.
External noise in your recording environment is kept to a minimum.
Your recording space is at room temperature and free of dust.

If your issue persists after checking, please contact us via our website.

SPECIFICATIONS

SR5314

Frequency Response| 20Hz – 30kHz
Polar Pattern| Cardioid
Sensitivity| 6.5 mV/Pa (-43.7 dBV/Pa)
Power Requirements| 5V to 12VDC using rings 3 & 6 on 6-ring concentric connector
Peak Acoustic Input| 133 dB SPL @ 6V (depending on transmitter supply voltage)
Output| Ring 1 & 2 on 6-ring concentric connector
Output Impedance| 0.1Ω unbalanced (ring 1 & 2)
Noise| 23dBA at capsule output (A-Weighted)
Threads| M36-0.75 thread pitch to match compatible
Sennheiser wireless handheld transmitters.
Dimensions L x D| Length 3.25 in (82.6mm)
Dia. max 1.6 in (40.6mm)
Dia. min 1.46 in (37mm)
Weight| 0.4 lbs. (0.18 kg)

WARRANTY

All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at: earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our warranty/repair department by email at: service@earthworksaudio.com.
NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/ received second-hand, please contact us via our website.