Earthworks Audio SR20 Gen 2 Instrument Microphone User Manual
- August 26, 2024
- EARTHWORKS AUDIO
Table of Contents
Earthworks Audio SR20 Gen 2 Instrument Microphone
Thank you for purchasing the Earthworks SR20 Instrument Microphone
Found with the biggest names in music and on the biggest stages in the world — Earthworks drum mics are truly game-changing. From all of us at Earthworks Audio, thank you for making us a part of your creative journey.
YOUR PURCHASE INCLUDES
- 1 SR20 Gen 2
- 1 Microphone Clip
- 1 Microphone Bag
- 1 Foam Windscreen
GETTING STARTED
The SR20 Gen 2 captures excellent sound as soon as it’s set up. To get started with your SR20 Gen 2, simply insert the microphone into its included clip. Mount the mic and clip onto a mic stand. Then plug an XLR cable into the mic, and connect the other end to your audio interface. Finally, turn on phantom power on your audio interface. That’s it!
PROPER MAINTENANCE
To guarantee your microphone provides years of performance, follow these guidelines:
- Avoid touching the front protective screen.
- Never attempt to disassemble the microphone.
- Avoid extreme heat and condensing humidity. Allow the microphone to warm up when bringing it in from the cold.
- Rough handling may damage the microphone even if no markings are visible.
TROUBLESHOOTING
If you encounter issues while using your Earthworks Audio microphone, please make sure that:
- Your microphone is connected to an active power supply.
- Phantom power is being supplied to the microphone.
- Your microphone and XLR cable are well connected.
- The microphone is positioned at an appropriate distance from the sound source.
- External noise in your recording environment is kept to a minimum.
- Your recording space is at room temperature and free of dust.
If your issue persists after checking, please contact us via our website.
SPECIFICATIONS
- Frequency Response 20Hz – 20kHz
- Polar Pattern Cardioid
- Sensitivity -50 dBV/Pa (3.2 mV/Pa)
- Power Requirements 48V, 6mA
- Max Acoustic Input 155 dBSPL
- Output XLR
- Minimum Load Impedance 1kOhm
- Self-Noise 25 dBSPL (A-Weighted)
- Dimensions 4.14 in x 0.860 in / 105.15 mm x 21.84 mm
- Weight 0.25 lbs / 0.10 Kg
COMPLIANCE REQUIREMENTS
Hereby, Earthworks Inc. declares that this product has been determined to
comply with UKCA requirements. The full text of the UK Declaration of
Conformity is available at the following site:
https://earthworksaudio.com/support/documents/uk
Hereby, Earthworks Inc.
declares that this product has been determined to comply with European Union
requirements. The full text of the EU Declaration of Conformity is available
at the following site: https://earthworksaudio.com/support/documents/eu
WARRANTY
All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at: earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our warranty/repair department by email at: service@earthworksaudio.com.
NOTE
This warranty only applies to Earthworks microphones purchased brand new. For
microphones purchased/received second-hand, please contact us via our website.
Version 3-SR20 G2, Last Updated 7/22/24 37 Wilton Rd. Milford, NH 03055
info@earthworksaudio.com © 2024 Earthworks
Audio, Inc
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>