EARTHWORKS AUDIO SR25mp Overhead Drum Microphones Stereo Pair User Guide
- June 9, 2024
- EARTHWORKS AUDIO
Table of Contents
EARTHWORKS AUDIO SR25mp Overhead Drum Microphones Stereo Pair
Thank you for purchasing the Earthworks SR25 Stereo Pair of Microphones!
YOUR PURCHASE INCLUDES
- 2 SR25s
- 2 Microphone Clips
- 2 Microphone Bags
- 2 Foam Windscreens
- 2 Tip Protectors
GETTING STARTED
Before setting up the microphone, pull back all existing settings and EQ. By
doing this, you will have a baseline understanding of how our microphones
sound, and will then be able to adjust accordingly.
Begin by removing all included components from the packaging. Make sure to
mute any incoming signal to speakers or headphones to avoid any loud “pops”
when connecting.
Connect the microphone to an audio interface supplying 24-48V phantom power
using a standard XLR cable. Please allow one minute for the microphone to
settle.
PROPER MAINTENANCE
To guarantee your microphone provides years of performance, follow these guidelines:
- Avoid touching the front protective screen.
- Never attempt to disassemble the microphone.
- Avoid extreme heat and condensing humidity. Allow the microphone to warm up when bringing it in from the cold.
- Rough handling may damage the microphone even if no markings are visible
- When not in use, keep the SR25s in their bags.
IMPORTANT NOTICE
The small tip on many of our microphones allows them to capture the highest
frequencies of your sound. Please be gentle and considerate when handling the
microphones with these tips.
(Microphones such as the SR314 and SR40V shield the tip within their capsule,
and are thus more durable.)
TROUBLESHOOTING
If you encounter issues while using your Earthworks Audio microphone, please make sure that:
- Your microphone is connected to an active power supply.
- Phantom power is being supplied to the microphone.
- Your microphone and XLR cable are well connected.
- The microphone is positioned at an appropriate distance from the sound source.
- External noise in your recording environment is kept to a minimum.
- Your recording space is at room temperature and free of dust.
If your issue persists after checking, please contact us via our website.
SPECIFICATIONS
SR25
Frequency Response| 20Hz – 20kHz ±2dB at 30cm
Polar Pattern| Cardioid
Sensitivity| 10mV/Pa
Power Requirements| 24-48V Phantom, 10mA
Peak Acoustic Input| 145dB SPL
Output| XLR-3
Minimum Output Load| 65Ω, balanced between pins 2 & 3
Noise| 20dB SPL (A weighted)
Dimensions L x D| 165 x 22 mm (6.5 x .860 in.)
Weight| 160g (.35lb)
WARRANTY
All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at: earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our warranty/repair department by email at: service@earthworksaudio.com.
NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/received second-hand, please contact us via our website.
WE’RE HERE TO HELP
For anything else, we’re a phone call or email away. Please feel free to contact us by email at info@earthworksaudio.com, or by phone at (603)-654-2433.
37 Wilton Rd. Milford, NH 03055
603-654-2433
info@earthworksaudio.com
earthworksaudio.com
© 2022 Earthworks, Inc
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>