EARTHWORKS AUDIO SR3117 Supercardioid Vocal Condenser Wireless Capsule User Guide
- June 9, 2024
- EARTHWORKS AUDIO
Table of Contents
SR3117 Supercardioid Vocal Condenser Wireless Capsule
User Guide
SR3117 Supercardioid Vocal Condenser Wireless Capsule
Follow us on social media @EarthworksAudio
For more information, please visit
earthworksaudio.com or call
1-603-654-2433.
Version 3.0, Last Updated 3/31/23
Thank you for purchasing the Earthworks SR3117 Vocal Wireless Capsule
YOUR PURCHASE INCLUDES
1 SR3117 Capsule
COMPATIBILITY
- Shure: ULX-D, QLX-D, Axient
- Audio Technica: 3000 Series, 5000 Series, 6000 Series
- Lectrosonics: HH, HHa
- Line 6: V75, V55
TROUBLESHOOTING
If you encounter issues while using your Earthworks Audio capsule, please make sure that
- Your microphone is connected to an active power supply.
- The microphone is positioned at an appropriate distance from the sound source.
- External noise in your recording environment is kept to a minimum.
- Your recording space is at room temperature and free of dust.
If your issue persists after checking, please contact us via our website.
ADDITIONAL TIPS
-
Aim the SR3117 toward the intended vocalist and away from unwanted sources.
• (Maximum rejection is found at the 135-degree point of the polar pattern. -
Place the SR3117 1-2 inches away from the vocalist’s mouth for best results.
-
Get closer to the SR3117 for extra bass response.
-
Place the SR3117 as far as possible from reflective surfaces.
-
Even though the SR3117 is treated to minimize handling noise, the best position for it is mounted onto a microphone stand.
-
Do not cover any part of the microphone grille with your hand, as this will adversely affect microphone performance.
-
Do not aim directly at your speaker or PA.
The windscreen can be removed if it requires cleaning. See details below.
CLEANING THE SR3117’s WINDSCREEN
All cleaning should be done with either alcohol wipes, or with a small amount
of alcohol on a soft cloth. Make sure any cleaned elements are completely dry
before reassembling.
A NOTE ABOUT THE SR3117’S INNER WINDSCREEN
The internal fine mesh pop filter is self aligning, and it stays in place
because of the interference fit. Be careful when unscrewing the outer
windscreen, as the inner pop filter may fall out.
When putting it all back together, make sure that it is properly aligned and
then simply screw the outer sleeve back in pace.
SPECIFICATIONS
Frequency Response
20Hz – 20kHz
Polar Pattern
Supercardioid
Sensitivity
6.3 mV/Pa (-44 dBV/Pa)
Dimensions
2.7″ x 1.93″
Weight
0.26 lbs (0.118 kg)
Wireless Compatibility
Shure: ULX-D, QLX-D, Axient
Audio-Technica: 3000 Series,
5000 Series, 6000 Series
Lectrosonics: HH, HHa
Line 6: V75, V55
COMPLIANCE REQUIREMENTS
Hereby, Earthworks Inc. declares that this product has been determined to be
in compliance with UKCA requirements.
The full text of the UK declaration of conformity is available at the
following site:
https://earthworksaudio.com/support/documents/uk
Hereby, Earthworks Inc. declares that this product has been determined to be
in compliance with European Union requirements.
The full text of the EU declaration of conformity is available at the
following site:
https://earthworksaudio.com/support/documents/eu
WARRANTY
All Earthworks® products carry a limited warranty (parts and labor). Please
register your warranty at:
earthworksaudio.com/register. If you
have any problems with your Earthworks products, please contact our
warranty/repair department by email at:
service@earthworksaudio.com.
NOTE
This warranty only applies to Earthworks microphones purchased brand new. For
microphones purchased/received second-hand, please contact us via our website.
Version 3.0, Last Updated 3/31/23
37 Wilton Rd. Milford, NH 03055
info@earthworksaudio.com
© 2023 Earthworks, Inc
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>