kogan KAMN32UC6LA 32 UHD USB C Monitor User Guide

kogan KAMN32UC6LA 32 UHD USB C Monitor

SAFETY & WARNINGS

• Read all instructions before using this monitor and retain this user guide for future reference.
• This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
• Do not insert any object or spray any liquid into the vents.
• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as well as in rooms lacking adequate ventilation.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cable.
• Do not open the back panel of the monitor as it contains a high-voltage current even when not plugged in.
• There is a polariser layer (not a protective film) on the surface of the screen. Do not peel it off or the monitor may be damaged.

The terms HDMI and HDMI High-Definition Multimedia Interface and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries

COMPONENTS

• Monitor
  

• Stand arm

• Screws (x3) (x1 spore included)

• Base (hand screw included)

• VESA screws (x4)

• HDMI cable

• Power cable

• User guide

OVERVIEW

| Button| Function
---|---|---
1| Power|

• Turn the monitor on/off.

2| Press left|

• Enter the input signal.
• Exit the current screen.

3| Press down|

• Enter Game Plus.
• Move down in the menu.
• Change settings in sub-menus

4| Press right|

• Enter the OSD main menu.
• Enter sub-menus.
• Confirm selection.

5| Press up|

• Enter Contextual Model.
• Move up in the menu.
• Change settings in sub-menus.

Ports

Indicator

computer is turned on, is operating normally and that all video cables are fully plugged in and/or connected to the monitor.

ASSEMBLY

1. Take the monitor out of the box and place it on a flat tabletop.
   

2. Remove the top foam cover and put it aside.Take the monitor out of the film bag and place the monitor on the lower foam cover.
   

3. Take the stand arm and the base out of the box. Mount the base on the stand arm and tighten the hand screw at the bottom of the base.
   

4. Align the assembled stand to the slot of the monitor. Insert and tighten 2 of the provided screws to connect the stand and the monitor.
   

5. Lift the monitor up straight and remove the lower foam cover. Stand the monitor up on the installed stand base.
   

Note: Do not pinch the monitor screen during assembly as doing so can damage it.

VESA MOUNT

VESA mounting pattern 75 x 75mm, screw size M4.
Note: VESA mount and mounting accessories are not in

1. Open the box, take out the monitor with protective foam attached and gently place it on a desktop or table. Ensure all components are removed from the protective foam.
   If the monitor is already attached to the stand, press the quick release button to remove the stand plate and detach the stand.
   

2. Remove the top foam cover and put it aside.Take the monitor out of the film bag and place it on the lower foam cover. Remove the 2 screws from the back of the monitor.
   

3. Screw the 4 provided VESA screws into the corresponding holes in the monitor casing.
   

4. Assemble the mount as per the instructions provided with the mount.
   
   Note:

   • Ensure the mounted monitor is firm ly installed to the wall to prevent it from falling. Do not place or hong any object on the mount. Ensure t he height of the mount is less than 2 meters.
   • Do not pinch the monitor screen, as doing so can damage it.

CONNECTIVITY

HDMI
Connect the provided HDMI cable from the computer’s HDMI port to the monitor’s HDMI port.

HDMl to DVI

Connect an HDMI to DVI cable (not provided) from the monitor’s HDMI port to the computer’s DVI port.
Note: Audio cannot always be transferred through a DVI port.

Display Port
Connect to DisplayPort cable (not provided) from the computer’s DisplayPort to the monitor’s DisplayPort.

Audio Out
Connect an audio output device (speakers, headphones etc.) to the audio port on the monitor. The monitor may need to be set as the computer’s default sound output device.

USB·C
Connect a USB-C cable (not provided) from the monitor’s USB-C port to the computer’s USB-C port.

Power cable
Connect one end of the provided power cable to the monitor power port, then connect the other end to a power outlet.

OPERATION

1. Connect the monitor to the input device via HDMI/DisplayPort.
2. Connect the power adapter to the monitor and then connect the other end directly to an electrical outlet.
3. Press the power button to turn the monitor on.

On-Screen Display (OSD)

Notes:

• The colour and shape of the OSD menu may vary slightly. The images in this guide are for reference only.
• Specifications of the OSD menu may change with improvements of functions without prior notice.
• Functions of the monitor vary with models and the functions in this manual are for reference only.

The On-Screen Display (OSD) menu may be used to adjust your monitor’s settings. It appears on the screen after turning on the monitor and pressing the power button.

5/crosshair 6
Game time| Off/15:00/30:00/45:00/60:00/position (top right, top left, bottom right, bottom left)
Dynamic brightness| Off /Normal/Expert/Elab
Picture settings| Brightness| 0-100
Contrast| 0-100
DCR| On/off
Contextual model| Off/Movie Mode/Reading Mode/Night Mode
Low blue light| 100
Sharpness| 0-5
Gamma| 1.8/2.0/2.2/2.4/2.6/S curve
Aspect ratio| Wide screen/4:3/1:1/auto
Colour settings| Warm| On/off
Natural| On/off
Cool| On/off
User1| On/off (R, G, B)
User2| On/off (R, G, B)
User3| On/off (R, G, B)
Hue| 0-100 (R/G/B/C/M/Y)
Saturation| 0-100 (R/G/B/C/M/Y)
OSD settings| Language| Portuguese//Brazilian/Deutsch/Dutch/Malaysian/Polskie/Portuguese
OS Dtime out| 0-60
OSD H-position| 0-100
OSD V-position| 0-100
OSD transparency| 0-5
Hotkey1 setting| Brightness/Contrast/Volume/Mute/Shadow Balance/Game Crosshair/ Refresh Rate/Game Time/Contextual Model/Input Signal/ Dynamic Brightness
Hotkey2 setting
Hotkey3 setting
OSD lock| On/off
Other settings| Input signal| Auto/USB-C/DP /HDMI
Volume| 0-100
Mute| On/off
Auto power| On/off
Eye protection mode| On/off
Reset| Yes/no
Information| Input source/resolution/mode

SPECIFICATIONS

HDMI 2.1: 3840 x 2160 @60Hz
Refresh rate| 60Hz
Power input| m0-240V- 50/60Hz 2.0A
The standard voltage and power supply may vary between countries. Refer to the label at the back of the monitor.
Product dimensions| Without base: 718. 6 x 56.7 x 422.1mm
With base: 718.6 x 220.0 x 560.5mm
Tilting angle| Forward titling : 5° ± 2°
Backward tilting: 12° ± 2°
Height range| 105 ± 5mm
Rotation angle| N/A
Vertical angle| N/A
Environmental conditions| Action| Temperature : 0°C-40°C (32°F-104°F) Humidity: 10%-90% RH (non-condensing)
Storage| Temperature: -20°-60° (-4°F-140°F) Humidity: 5%-95% RH (non- condensing)

CUSTOMER SERVICES

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>