SCORPION 12 Inch Windows Rugged Tablet PC User Guide
- June 15, 2024
- SCORPION
Table of Contents
- SCOPE OF DELIVERY
- FEATURES
- BATTERY REMOVAL
- SIM CARD
- SCANNER SETUP
- FAQ
- What should I do if the device or the scope of delivery does not meet my
- What do I do if the device or individual components / accessories are
- Where do I find my Windows license key / license sticker?
- I only see a small sticker, but not the license key?
- The Windows setup (OOBE) asks for a license key. How can I activate
- SAFETY INSTRUCTIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SCORPION 12 Inch Windows Rugged Tablet PC User Guide
SCOPE OF DELIVERY
This package includes:
-
SCORPION 12″ – Windows Rugged Tablet
-
19V/3.42A power adapter with 2-pol EU cable and barrel connector 4.0 / 1.7mm
-
Foldable stand (incl. screws)
-
Carrying strap
-
Plastic lever
-
Hand strap
FEATURES
A = Treiber Output / Receiver Output, Non-Inverting (D-)
B = Treiber Output / Receiver Output, Non-Inverting (D+)
COM 2
Pin| RS-485
1| B
2| A
3| NC
4| NC
5| A-GND
6| NC
7| NC
8| NC
9| NC
-
Audio-Out 3.5mm
-
USB Type C
-
Mini-HDMI (HDMI 1.4a Type C)
-
USB 3.0
-
USB 3.0
-
LAN
-
DC input
-
Programmable buttons P1/P2
Download F-key utility:
https://downloads.bressner.de/download/scorpion-12-windows-f-key-utility/
-
Volume +
-
Volume –
-
Power On/Off
-
Status LEDs: (power/charge indicator/WLAN)
-
2MP front camera
-
Docking port
-
Corning® Gorilla® Glass
-
USB 2.0
-
DB-9 serial COM 2: RS-485 fixed (Pin1: D+ / Pin2: D- / Pin5: GND)
-
DB-9 serial COM 1: RS-232 fixed (standard)
-
Kensington lock
-
Replaceable battery (SIM and SD card slots are located below the battery)
-
5MP rear camera
-
Barcode scanner (optional)
-
Scan button F
-
Right speaker
-
Left speaker
BATTERY REMOVAL
Please follow the instructions, when removing battery!
Step 1
First release the battery cover lock by moving the slider on the back of the
tablet to the left.
Step 2
Take the enclosed plastic lever and carefully lift the battery out of the
battery compartment (see illustration).
Step 3
Carefully lift out the battery, insert a replacement battery, and reverse the
steps to close and reseal the tablet.
SIM CARD
How to insert the SIM card correctly:
In order to reach the SIM card slot the device’s battery must be removed first
(please follow the instructions on the left side). After removing the battery,
insert the micro SIM card into its designated slot (see illustration), until
it locks in. Please make sure that the gold contacts of the SIM card are on
the bottom side. Afterwards repeat step 1 to 3 on the left side in reverse
order to reseal the device properly.
SCANNER SETUP
Honeywell 2D scanner N3680 (optional)
Technical Details
The N3680 barcode scan engine is a revolutionary, fully decoded, compact 2D
imager from Honeywell. It inherits the legendary Adaptus™ 6.0 decoding
performance in our most compact design. The N3680 2D imager represents a fine
balance between size, performance and ease of integration – ensuring an
excellent end-user experience.
Not only does the N3680 2D imager support a wide variety of symbol ogies,
including 1D, 2D and PDF417 bar codes, it also includes advanced features that
support reading poorly printed bar codes and can even read bar codes directly
from smartphone screens. This makes the N3680 2D imager a perfect choice for
reading mobile coupons and loyalty cards, mobile ticketing, paperless boarding
passes and bar code payment systems for mobile wallet applications.
Operation and configuration of the scanner
The user manual for the Honeywell scanner series N36XX provides a lot of
information about the functionality and configuration of the scanner module.
Use the included programming codes to transfer the desired configuration
settings to the scanner. These programming codes can be scanned directly from
the User’s Guide. To do this, follow the instructions in each chapter. At the
end of the manual you will also find a “Programming Chart” with the numbers
0-9 to be able to scan sequences of numbers if required. Attention – The
configuration data is stored directly in the scanner module and not in the
operating system. Consequently, you can use this type of scanner programming
regardless of the installed operating system.
Examples of typical configuration settings:
Setting the language of the keyboard layout, activating/deactivating code
types, configuring prefixes and suffixes, activating inverse codes, adjusting
the position and size of the scanned section, loading factory defaults, etc.
EZConfig for Windows
For extensive and complex configurations please install the utility “EZConfig”
from Honeywell. This utility is a browser-based interface for reading, editing
and restoring scanner configuration data. It also allows you to save a
complete configuration as a file (*.exm). This can then be transferred to the
scanner of another device via EZConfig. Android devices, on the other hand,
have a preinstalled scanner app for setting up the most frequently used
scanner configurations.
If you still need help setting up the scanner please contact our support:
+49 8142 47284 – 44
Datasheet
http://bit.ly/n3680-datasheet-en
EZConfig – Setup
http://bit.ly/ezconfig-setup
User’s Guide
http://bit.ly/n36xx-user-guide-rev-b
EZConfig – Tutorial
http://bit.ly/ezconfig-tutorial
FAQ
Frequently asked questions
What should I do if the device or the scope of delivery does not meet my
order or if individual components / accessories are missing?
If you find that your order is incomplete or even faulty, our in-house support department will gladly attend to you. If you need help or assistance, please fill out the support form on our website to open a support case: https://www.bressner.de/en/support-en/ Alternatively, you can send your request via e mail: ipcsupport@bressner.de You can also contact our technical support on weekdays from 8AM - 5PM by phone: +49 8142 47284 - 44
What do I do if the device or individual components / accessories are
defective?
In case of a defect in equipment, individual components or the accessories supplied, a return shipment or repair can be arranged. BRESSNER Technology provides its own RMA form for this purpose. Please read the instructions on our website regarding the RMA procedure carefully before filling out the form and returning it. You can find the form on our website at: https://www.bressner.de/en/rma/ You can also contact our RMA department on weekdays from 8AM - 5PM by phone: +49 8142 47284 - 24
Where do I find my Windows license key / license sticker?
For systems with replaceable batteries, the sticker with the license key is located in the battery compartment. For systems with a permanently installed battery, the sticker is on the back of the device. In special cases there may be no license sticker at all, in which case the license key is rooted in the BIOS (OEM 3.0 activation).
I only see a small sticker, but not the license key?
In this case it is the ePKEA version of the license sticker, which means the Bressner OEM product key is integrated into the image. The key itself is not visible to the user (in plain text).
The Windows setup (OOBE) asks for a license key. How can I activate
Windows?
Please skip this step without entering a key, the Windows product key was already stored by us in the installation. When the OOBE is completed and an internet connection is established for the first time, Windows 10 activates automatically within a few minutes.
Important information about Windows 10/11 IoT Enterprise LTSC
Please read and observe the following instructions concerning the operating
system(s):
- The LTSC versions deliberately do not receive any feature updates, the original versions are always retained.
- Avoidance of lengthy update processes, faulty updates or incompatibilities with new versions
- Secure operation, since security updates and patches are performed via Windows update or manual installation
- Software update from LTSC to standard Win11/Win10 version not possible (only by new installation with new licensing)
- 10 years guaranteed support by Microsoft from date of introduction
- Full driver and software compatibility (except UWP apps) with all popular Win11/Win10 versions Home/Pro/Enterprise)
- Domain integration possible
- Slim basic installation without superfluous add-ons
- Systems can be used worldwide (special regulations of different countries do not apply to IoT Embedded Licensing)
- Low-cost licensing model in three price levels, depending on processor performance (Entry, Value, High End)
- ATTENTION: The LTSC versions deliberately do not contain a Microsoft Store and the installation of Microsoft (UWP) apps is not possible. The only exception is the Microsoft CameraApp, which was preinstalled on the device by Bressner Technology in order to be able to use the camera(s). Win11/Win10-compatible programs, on the other hand, can be installed with no issue (examples for browsers: Microsoft Edge Browser, IE11, Firefox, Chrome, Opera, etc.)
- Systems with IoT Embedded Licensing are not covered by support contracts with Microsoft (Enterprise Licensing).
SAFETY INSTRUCTIONS
Please read and observe carefully before using!
Environment:
Protect the device from temperatures outside the specified range. The device
is protected against spray water but must not be submerged in water or be
exposed to water jets. Do not expose the unit to strong magnetic fields or
strong static electricity. Once water or liquid has entered the unit, turn it
off and do not use until it is dried. Have it checked by a qualified
specialist.
Safety in operation:
Do not drop the device. Do not bend or twist it. This may result in a breakage
of the display glass or of circuit boards and mechanical parts. To avoid
hearing damage, listen to music via headphones at a moderate volume and never
place the speaker outputs directly in front of your ear. Keep packaging
materials and small parts away from children.
There is a danger of suffocation. Never open the case of the appliance or the
charger (risk of electric shock, short circuit and fire). Do not put objects
through slots or openings on the appliance or charger (risk of electric shock,
short circuit, and fire). Do not attempt to open the unit, the unit may be
destroyed and you will lose warranty
Cleaning:
Never clean the surface of the appliance with solvents, detergents or other
chemical products. Use a soft, dry cloth instead.
Power supply:
Always use the original charger or one with suitable current and voltage
rating to prevent damage to the device.
If you use an universal charger, consider the polarity of the charger as well
as the current and the voltage rating. Do not unplug the charger from the wall
outlet by pulling the cable. Do not use chargers with damaged cables or plugs.
Disposal:
Dispose used electronic equipment at the appropriate collection points. Please
note that your device has a battery and therefore it must not be disposed with
normal household waste. Please consult your local or municipal authorities for
the correct disposal route of your device and battery.
Battery:
Your device is designed for mobile use, which involves regular charging and
discharging cycles. The current battery charging setting is not intended for
continuous 24/7 operation. Continuous 24/7 charging without adjusting firmware
parameters is not recommended, as it may increase the risk of battery
swelling. A shortened warranty period of 6 months applies to rechargeable
batteries.
Please also note the following:
- Fully charge the battery every six months
- Avoid exposing the device or the battery to excessive heat
- Do not expose the battery to mechanical stress
- Do not damage batteries with sharp or pointed objects
- Do not throw batteries into fire – they may explode
- Do not pour any liquids over the battery
- Avoid short-circuiting the battery, as it may result in overheating and ignition of the battery
- If liquid leaks from the battery and comes into contact with the eyes or skin, rinse immediately with clear water and seek medical advice
- Incorrect replacement of the battery may result in a risk of explosion
- Replace battery only by the same or an equivalent type recommended by the manufacturer
- Please do not dispose used batteries with household waste. Use the service of specialist shops that carry out the exchange.
For more information about the product and a detailed description, please
visit:
https://www.scorpion-rugged.de/en/12-models/scorpion-12-windows/
BRESSNER Technology GmbH Industriestrasse 51 82194 Groebenzell.
Phone: +49 (0) 8142 47284-76
E-mail: scorpion@bressner.de
References
- bit.ly/ezconfig-setup
- Salesforce
- bit.ly/n3680-datasheet-en
- N36XX-UG.book
- RMA | How to arrange return shipments - BRESSNER Technology GmbH
- Support - BRESSNER Technology GmbH
- SCORPION 12" Windows | Industrial Rugged Tablet
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>