SCORPION SPORTS EUROPE EXO-CITY II Premium Motorcycle Helmets Instruction Manual
- June 10, 2024
- SCORPION SPORTS EUROPE
Table of Contents
SCORPION SPORTS EUROPE EXO-CITY II Premium Motorcycle Helmets
FEATURE SUMMARY
-
SPEEDVIEW® SUNVISOR
Retractable interchangeable internal sun visor. Choose the up or down position with the flip of the switch. Features our anti-scratch coating. -
WIND REDUCTION FACESHIELD
Advanced shield design allows for a reduction in wind turbulence near the face. -
KWIKWICK® C REMOVABLE/WASHABLE ANTI-MICROBIAL LINER
Scorpion’s moisture-wicking lining material feels cool to the touch in warm weather and warm in cool weather while maintaining anti-microbial and hypo- allergenic properties. -
AERO-TUNED VENTILATION SYSTEM
Big vent on the top of the helmet forces cool air into the helmet interior. -
SPEAKER POCKETS
Cheek pads feature convenient pockets for your speaker devices. -
ADVANCED POLYCARBONATE ENGINEERED OPEN-FACE SHELL
Designed for comfort and ease in warm weather
SPEEDVIEW® SUNVISOR
SPEEDVIEW® SUNVISOR REMOVAL
NOTE : For easier sunvisor removal, open up the outer faceshield first
- Grab the sun visor with your hand while holding the helmet with the other hand.
- Strongly pull off the sun visor to the bottom front direction. The small post on the sun visor surface will disjoint from the groove in the side bracket.
- With one side now disjointed, do the same for the other side to completely detach the sun visor.
- Reverse the process to install it.
SPEEDVIEW® SUNVISOR OPERATION
- To lower the sun visor, simply pull the sun visor retraction lever down
- To raise the sun visor, just push the sun visor retraction llever up.
KWIKWICK® ANTI-MICROBIAL LINER
CHEEK PADS REMOVAL
Gently pull out the cheek pad to the other side until three plastic snaps are
detached from the helmet. Repeat the process to remove the cheek pad on the
opposite side.
CROWN LINER REMOVAL
Once both cheek pads are removed grasp the crown liner near the back of the
head and pull the liner toward the eye port to release it from the plastic
snaps. Once unsnapped gently tug on the crown liner to release it from the
forehead tension groove. Reverse this process to reinstall the crown liner and
cheek pads.
FACESHIELD REPLACEMENT
- Close face shield.
- Turn the side cap.
- Close -> Open
- Inside the cap
- Take off the side cap.
- Fully open the shield. The shield will easily detached.
Reverse the process to install face shield. Check the inside of the side cap to apply correct side (Lor R).
5 rue Gutenberg 67720 Hoerdt, France