SCORPION EXO-COMBAT II Premium Motorcycle Helmets User Manual

SCORPION EXO-COMBAT II Premium Motorcycle Helmets

FEATURE SUMMARY

1. Easily Removable Mask
   The mask is easily installed and removed because it is guided by strong neodymium magnets. Its purpose is to shield the rider from excessive winds, oust, and small flying objects. It has two mouth vents which are covered by mesli filters to filter out smaller particles. NOTE: The mask is for aesthetics and comfort. It does not provide protection.

2. SpeedView® Retractable Internal Sun Visor
   The retractable internal sun visor protects the rider from excessive sunlight, dirt, and small flying objects. It is optically clear and features a state of the art fog-free technology, a anti-scratch hardened coating, and UV protection.

3. KwikWick® C Liner Fabric
   The removable and washable liner features a soft and supple hypo-allergenic, anti-bacterial material with advanced moisture-wicking properties.

4. Speaker Pockets
   Speaker ducts designed into the EPS allow compatibility with communication unit speakers up to 40mm.

5. Kwikfit®
   Kwikfit® cheek pads allow easy on and off of the most common styles of eyeglasses.

6. 30 Contoured Cheekpads
   Plush removable and washable 3D contoured cheek pads for ultimate fit and comfort lined with our KwikWick® Ill Fabric.

7. Aero-Tuned Ventilation System
   Intake ports across the front of the helmet force cool air into the helmet interior while exhaust vents maximize the movement of hot air out of the helmet.

WARNING
Use the removable mask only for weather protection, not for impact protection. Improper use of the mask may cause severe injury or death by impacts exceeding the helmet’s protection capability.

WARNING
Always check to make sure the crown liner, neckroll and cheek pad are installed before using the helmet. A helmet without a crown liner and/or cheek pad may increase your risk of serious injury or death.

FACESHIELD REPLACEMENT

USING SPEEDVIEW® SUN VISOR

• To lower the sun visor, simply pull the SpeedView® Sunvisor lever down.
• To raise the sunvisor, simply push the SpeedView® Sunvisor lever up.

REMOVING SPEEDVIEW® SUN VISOR

• Firmly hold the sun visor with your hand and gently pull one side out away from the helmet to release.
• Repeat to release the opposite side. Reverse process for installation.

Removing The Mask

• Open the shield.
• Push the button on one side of the sleeve.
• While pushing the button completely with one hand, pull out the mask with the other hand.
• Do the same for the other side of the sleeve.

Installing The Mask

IMPORTANT NOTE:
The Mask is NOT FOR PROTECTION but for comfort use.

• Push the mask into two holes in front of the sleeve until you hear back” sound.
• Be sure to hear this “click” sound to secure the mask. Then pull the mask to the outer direction several times to check whether it is securely assembled to the helmet.

CHEEK PADS REMOVAL

• Gently pull out the cheek pad to the other side until three plastic snaps are detached from the helmet.
• Repeat the process to remove the cheek pad on the opposite side.

CROWN LINER REMOVAL
Once both cheek pads are removed grasp the crown liner near the back of the head and pull the liner toward the eye-port to release it from the plastic snaps. Once unsnapped gently tug on the crown liner to release it from the forehead tension groove.
Reverse this process to reinstall the crown liner and cheek pads.

KWIKWICK® C LINER REMOVAL/ MOUTH VENT

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>