MiBOXER FUT074WR RGB+CCT LED Light WiFi + 2.4G Instruction Manual

MiBOXER FUT074WR RGB+CCT LED Light WiFi + 2.4G

Product Features

This product uses WiFi + Bluetooth + 2.4G wireless transmission technology, low power consumption, and strong and-interference ability. WiFi + Bluetooth connect network can greatly enhance the connect network experience. When the router is disconnected, Bluetooth can also directly connect and control equipment at close range.
After successful network configuration using the [Tuya Smart] app to achieve wireless dimming, remote control, group control, scene control, mind control, music movement, biorhythm, sleep plan, wake plan, one key execution, automation, etc. functions. It also supports a 2.4G remote control.

• 16 Millions of colors to choose
• Colour temperature adjustable
• Dim brightness / Saturation
• 2.4G RF wireless transmission technology
• WiFi wireless control supports long-range control
• Auto-transmitting & Synchronization (only for remote control dimming)
• Device sharing
• Tap-to-Run & automation
• Timing setting/countdown turn on/off LED light
• DMX512 controllable (DMX512 LED transmier is needed)
• Remote control Control distance 30m
• Smartphone app control
• Support third-party voice control
• Group control
• Biorhythm
• Support music rhythm
• Sleep / wake-up plan
• Support scene customization
• Do not disturb mode

Compatible with these 2.4G RF remote controls (Purchased separately)

RF Remote control instruction

Linking Code Instructions

1. Power off for 10 seconds and power on again
2. Short press ” I ” button 3 times within 3 seconds.
3. Lights blink 3 times slowly means linking is done successfully.

Linking fails if the light is not blinking slowly, Please follow the above steps again. (Note: Light that has linked can’t link again)

Unlinking Code Instructions

1. Power off for 10 seconds and power on again
2. Short press the ” I ” button 5 times within 3 seconds.
3. Lights blink 10 times quickly means unblinking is done successfully.

Unlinking fails if the light is not blinking quickly, Please follow the above steps again.
(Note: Light hasn’t linked that doesn’t need to unlink)

Auto transmitting and synchronisation (only for remote control)

Remote signal auto-transmitting

• One light can transmit the signals from the remote control to another light within 30m, as long as there is a light within 30m, the remote control distance can be limitless.

Dynamic modes auto synchronization

• Multi lights can synchronize if they are in the same dynamic mode and linked with same remote (the distance between each light is within 30m)

Dynamic mode table selection (only for remote control)

Select dynamic mode table 1

• While the light is in static mode, short press the “ S+ ” button 5 times quickly untill the blue light flashes 3 times slowly, static mode is activated successfully.

Select dynamic mode table 2

• While the light is in static mode, short press the “ S- ” button 5 times quickly untill the yellow light flashes 3 times slowly, static mode is activated successfully.

Dynamic mode table 1 (default)

Adjustable

2| Automatic color change
3| Sam
4| Gemstone
5| Twilight
6| American
7| Fat Tuesday
8| Party
9| Slow Color Splash

Dynamic mode table 2 (need to switch manually)

Adjustable

2| White light Gradual change
3| RGB gradual change
4| Seven colours jump to change
5| Jump to change randomly
6| Red light gradual change

+Flash 3 times

7| Greenlight gradual change

+Flash 3 times

8| Blue light gradual change

+Flash 3 times

9| White light gradual change

+Flash 3 times

Do Not Disturb” mode is activated and shut down (default activated)

• Turn on “Do Not Disturb” mode (wide use in the area which has power failure frequently to save energy)

RF Remote turn on and turn off instruction

• Turn on the “Do Not Disturb” mode
• Press the “OFF” button three times within three seconds and press the “ON” button three times, Activated successfully once the LED light flashes four times quickly.

Attention: Do not disturb mode is activated

1. When the light is OFF status (For example: Use an app or remote to turn off the light) The light is OFF status once you turn off the power and turn on again. (User must turn off and turn on power twice times to activate light or use an APP/remote to activate light)
2. When the light is ON status The light is ON status once you turn off and turn on power one time.

Turn off the “Do Not Disturb” mode

• Press the “ON” button three times within three seconds and press the “OFF” button three times, close successfully once led light flashes four times slowly.
• Attention: The light will be always on “ON” status if you turn on and turn off the power once the user closes “Do Not Disturb” mode.

App turns on and off the “Do Not Disturb” mode instruction

Smartphone APP control instruction

• Network Configuration (Don’t support 5G router)

Download and install the [Tuya Smart] app

• Search for [Tuya Smart] in the Apple or Google store or scan the following QR code to download and install the app. Please open the app and click the ” Register ” button to create an account while using it in the first time, Log in directly if you already have an account.

Network Configuration

1. Connect controller with power supply.

2. Confirm indicator light is flashing quickly (2 flashes per second),
   If the indicator light isn’t in a fast flashing state, there are two ways to enter:

   • Long press the ” SET ” key untill the indicator light flashing quickly.
   • Power off and on the controller 3 times.

3. Connect the phone to the home WiFi network in the 2.4GHz frequency.

4. Open the homepage of the app and click the” + ” button at the upper right corner of the page.

5. Click ” Lighting ” on the leti side of the page and then click ” Light Source (BLE+Wi-Fi) “

6. Follow the app prompts to complete the configuration.

App turn on and off “Do Not Disturb” mode (default activated)

• Click the light which needs to be set up or group control — click “More” — click “Power-on behaviour” — turn on or off.

Alexa voice control instruction

Please add the device to the [Tuya Smart] app (check details on page 6), then start following the steps

1. Open Alexa App
2. Click “More” on the bottom of the right corner
3. Click “Skills & Games”
4. Click “ ” on the top of the right corner
5. Type into “Smart life” and search
6. Click the “Smart Life” skill, follow the instructions to finish the configuredtion and start voice control

Google Home voice control instruction

Please add the device to [Tuya Smart] app (check details, then start following the steps

1. Open the Google Home App
2. Click “+” on the top of left corner
3. Click “Set up device”
4. Click “Works with Google”
5. Click “ ” on the top of the right corner
6. Type into “Smart life” and search
7. Click the “Smart Life” skill, follow the instructions to finish the configuration and start the voice control

DMX512 LED Transmitter Control (Purchased separately)

DMX512 LED Transmitter Link/Unlink

1. Follow the instructions of DMX512 transmier (FUTD01), Choose the zone for the light by pressing “ + ” or “ – ” (e.g. “CH12” means zone 12)

Link

• The light is powered off for 10 seconds and then powered on,
• Short press “ ” 3 times within 3 seconds while the indicator of controller is ON
• Link is done once indicator of controller flashes 3 times slowly

Unlink

• The lamp is powered off for 10 seconds and then powered on.
• Short press “ ” 5 times within 3 seconds while the indicator of controller is ON
• Unlink is done once indicator of controller flashes 10 times quickly

If the link or unlink failed, please follow the above steps again.

Attention

1. Please turn off power supply before installation.
2. Please ensure input voltage to be same as requirements from device.
3. Don’t disassemble device if you are not expert, otherwise it will damage it.
4. Please do not use the light in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>