inateck KB04118 Bluetooth Keyboard User Manual

Instruction Manual
**KB04118 Bluetooth Keyboard

**

Product Diagram

Bluetooth Pairing

Step 1: Put the iPad case on and slide the keyboard switch to the On position. Hold down simultaneously and then the keyboard will enter pairing mode with a blinking blue indicator light. Step 2: On your iPad, go to Settings > Bluetooth, turn on Bluetooth and then “Inateck KB04118” will showupin “Other Devices” .
Step 3: Tap “Inateck KB04118” to pair it with your iPad. The Bluetooth indicator will go off in seconds, which means that Bluetooth pairing is completed.

: Note:

1. Set Up Your iPad: ‘
   ‘ For better user experience, please follow steps below to set up your iPad at first use once Bluetooth  : pairing is completed.
   Go to Settings > General > Trackpad and drag the slider to the middle of the tracking speed.
   Go to Settings > General > Trackpad and turn on “Tap to Click” and “Two Finger Secondary Click” .
   Go to Settings > Accessibility > Touch and turn off AssistiveTouch.
   Go to Settings > General > Gestures and enable the toggle for the “Four and Five Finger Swipe setting. ‘
   ‘ Optional Settings
   Steps to stop Caps Lock changing your keyboard language: :
   Go to Settings > General > Keyboard > Hardware Keyboard and turn off Switch Languages using
   Caps Lock.
   Steps to disable the double tap period shortcut:
   Go to Settings > General > Keyboard > Hardware Keyboard and click the switch to turnon  Shortcut.

2. Fix Bluetooth Pairing Problems:
   Step 1: Go to Settings > Bluetooth, find “Inateck KB04118” in My Devices and tap the info button next to it, then tap “Forget This Device” . If there are multiple pairing records related to the keyboard, please clear all of them.
   Step 2: Hold simultaneously for 3 seconds and then the three indicators will blink for 3 times once the factory reset is completed.
   Step 3: Pair your Inateck KB04118 with your iPad. ;

Multi-Touch Gestures

| Drag:
cliananotdthe emuntitins
up and drag it o another location
withanother finger.| | Scroll:
Slde two fingers up or down to scroll.
---|---|---|---
| Swipe:
Swipe left or right with two ngers.| | Zoom in or out:
Pinch with two fingers to zo0m inorout.
| Secondary clic;
Clckor tap vith two fngers.| | Show desktop:
up with two fingers to zoom in or out.
| App Exposé:
Swipe up with three fingers and pause.| | Swipe between full- screen apps:
Swipe left o right with three ingers.

Adjust the Keyboard Backlight

1. Hold simultaneously to adjust the backlight color. 7 colors are available in total.
2.  Hold simultaneously to adjust the backlight brightness. 3 levels are at your choice.

Shortcut Keys

1. | Undo| | Brightness-| | Brightness+
   ---|---|---|---|---|---
   | Search| | App Switcher| | Take a screenshot
   | Switch keyboard layout| | Return to Home Screen| | Show/Hide Keyboard
   | Last track| | Play/Pause| | Next track
   | Mute| | Volume-| | Volume+
   | Lock| | | |
2. Common Keyboard Shortcuts
   | Cut| | Copy| | Paste
   ---|---|---|---|---|---
   | Select all| Space| Search| control+Space| Switch keyboard layout
   | Switch between Apps| | | |

LED Indicator

Restore Factory Defaults

Hold imultaneously for 3 seconds and then the three indicators willblink for 3 times once the factory reset is completed.

Check Battery Level

Hold simultaneously to check the battery level according to the blinking frequency of the red battery indicator.

Charging

When the battery level is under 209%, the battery indicator will blink in red. Please recharge the keyboard in time. The recommended charging voltage and current are 5V and 250mA respectively. To recharge the keyboard, you can connect the included USB cable to the charger of your cellphone or the USB port of a computer. The keyboard will be fully charged in 2-3 hours. The indicator will stay in red when the keyboard is charging and turn green when it’s fully charged.

Sleep Mode

1. When KBO4118 isleft idle for 1 minutes, the backlight will tur off.
2. When KB04118 s left idle for 10 minutes, it will enter sleep mode and the Bluetooth connection will be disrupted. The connection can be rebuilt with a press of any key.

Note : Tapping the trackpad cannot wake up the keyboard.

Product Specification

Packing List

• KBOA118*1
• Charging Cable *1
• Instruction Manual -1

FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

EU Declaration of Conformity

Inateck Co, Ltd. hereby deciares that this device complies with the Directive 2014/53/EU .
A copy of the Declaration of Conformity can be accessed from https://www.inateck.de/pages/euro-compliance.
Service Center

Europe
F&M Technology GmbH
Tel: +49 341 5199 8410 (Working day 8 AM – 4 PM CET)
Fax: +49 341 5199 8413
Address: Fraunhoferstrafe 7, 04178 Leipzig, Deutschland
North America
Inateck Technology Inc.
Tel: +1 (909) 698 7018 (Working day 9 AM – 5 PM PST)
Address: 2078 Francis St., Unit 14-02, Ontario, CA 91761, USA
F&M Technology GmbH
Fraunhoferstrae 7, 04178 Leipzig, Deutschland
Tel: +49 341 5199 8410
Inateck Technology (UK) Ltd.
| UK | REP | 95 High Street, Office B, Great Missenden, United
Kingdom, HP16 OAL
Tel: +44 20 3239 9869
Manufacturer
Shenzhen Inateck Technology Co., Ltd.
Address: Suite 2507, Block 11 in Tian An Cloud Park, Bantian Street, Longgang District, Shenzhen, Guangdong, China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>