MONODEAL x100 Bone Conduction Headphones User Manual
- June 15, 2024
- Monodeal
Table of Contents
- Structure Specification
- Packaging accessories
- Pairing Method
- Charging Method
- LED Indicator
- Headset Specification
- Basic operations
- Trouble Shooting
- Connect Two Cellphone
- Storage & Maintenance
- Wearing diagram
- Restore factory settings
- CUSTOMER SUPPORT
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MONODEAL x100 Bone Conduction Headphones
Structure Specification
- Volume+/On-OFF
- Volume-
- Magnetic Charging Port
- LED Indicator
- Microphone
- Multifunction
Packaging accessories
-
Headphone
-
Charging Cable
-
Earplugs
Include:
- Bone conduction headphone*
- Charging Cable*
- Use manual*l
- Earplugs*l pair
Pairing Method
Pairing with a mobile phone
- First time use, the headset needs to be paired with a mobile phone connection.
- In the off state, long press the multi-function key for about 6 seconds until the red and blue lights flash alternately, the device automatically enters pairing mode; (no pairing connection record in the case of power on, the red and blue lights flash alternately)
- Open the Bluetooth function of your mobile phone, search for the Bluetooth device name “x100”, select it and connect it.
- If necessary, you can enter the password “0000”.
- After successful connection, the indicator will light blue constantly
Note:
After successful connection, the next time you turn on the X1 00the headset
will automatically connect back to the last connected phone.
NOTE:
- When the connection distance between the headset and the Bluetooth device is more than 10 meters or 33 feet, the headset will disconnected from the BT device. Within 5 minutes thereafter, if they are in the range of 33 feet, they will automatically reconnect. If the headset is not connected
- back within 5 minutes, it will automatically shut down.
Headset support reconnect with last BT device when they are both in pairing mode.
Charging Method
Use the included magnetic induction cable to charge the headset; The LED indicator will change from red to blue when charging is complete .
- Please fully charge your headset before the first time use .
- Please do not use the headset during the charging .
- To extend the battery life, if the headset is not used for a long time , it is recommended to charge the headset once a month .
LED Indicator
| Statuses | Meaning |
|---|---|
| Solid red | Charging |
| Solid blue | Charging completed |
| Flash red and blue | Pairing mode |
| Flash red | Low Battery |
| Flash slowly in blue | Incoming call/ On call/ |
Playing music
Headset Specification
| Bluetooth version | V5.2 |
|---|---|
| Microphone | -380dB+3dB |
| Wireless Frequency | 2.402-2.480GHz |
| Compatible profiles | A2DP, AVRCP, HFP,HID |
| Connection distance | 10m |
| Transmit power | Class2 (-6dbm-4dbm) |
| Response frequency | 80Hz-20KHz |
| Transducer | ¢16.8,8O+15%,86+3dB, 1W |
| Charge voltage | 5V/500mA |
| Battery | Polymer battery |
| Battery capacity | 180mAh |
| Standby time | > 1 0days |
| Charge time | 2hours |
| Working time | 5-8 hours (standard volume) |
| Water resistant | IP65 |
Basic operations
| Function | Action | Voice prompt |
|---|---|---|
| Power ON | Press and hold volume+ for 3s | Power on |
| Power OFF | Press and hold volume +for 5s | Power off |
| Adjust volume | Single-click volume+ or volume- button | |
| Previous song | Double-click volume- button | |
| Next song | Double-click volume+ button | |
| Answer/End call | Single-click multifunction button | |
| Activate voice assistant | Double-click multi-function key | One beeps |
| Bluetooth connected | Connected | |
| Bluetooth no connected | Two beeps | |
| Battery low | Two beeps |
Bluetooth mode: The headset can be connected to PC or cell phone through Bluetooth.
Trouble Shooting
| Fault | Reason | Solution |
|---|---|---|
| Power on failure | Battery low | Try lo charge the headset |
| Failed to automatically | Standby mode | Press and hold volume+ for 3s |
| Failed to discover Bluetooth headset | The headset is not in pairing mode |
Press and hold volume+ for 3s
Connect Two Cellphone
-
Pair the Bluetooth receiver to the first phone.
After pair successfully, turn off the Bluetooth function of the first phone. The receiver will enter pairing mode again. -
Pair the Bluetooth receiver to the second phone.
-
After pair successfully, Turn on the Bluetooth function of the first phone. Select the “x100” and click “connect”.
-
Two phones will both connect the Bluetooth receiver at the same time.
Storage & Maintenance
- Headset should be kept in cool and dry place, with a temperature from 0°C to 45°C;Working in an extremely cold, extremely hot, or high humidity environment may limit the working time and shorten the battery life of the headset.
- Please charge the headset when it has not been in use for an extended period of time.
- Listening at a high volume may damage your hearing and distort the audio quality.
- Please only clean headset with a soft dry cloth.
- Please do not charge headset immediately after exercising in order to prevent damage to the headset circuitry that can be caused by liquid residue exposure.
- Keeping the charging port dry will reduce the possibility of damaging the headset.
Wearing diagram
When a call is required, the microphone lever can be toggled in the direction
shown to a position near the mouth.
When the microphone lever is not required, it can be toggled to a position
next to the ear as shown.
Restore factory settings
When the headset is turned on and not connected to Bluetooth, press the power button (volume+ button) 5 times, the red and blue lights flash at the same time for 3 consecutive times, after hearing the beep, the red and blue lights flash alternately to enter the pairing state. At this time, it means to restore the factory settings.
CUSTOMER SUPPORT
After-sales website: support@monodeal.net
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>