MONODEAL DV68 Bone Conduction Headphones Bluetooth User Manual
- June 14, 2024
- Monodeal
Table of Contents
MONODEAL DV68 Bone Conduction Headphones Bluetooth
Summary Of Button Functions
- Power On/Off/Volume up
- Volume down
- LED indicator
- charging port
- Multi fuction Button: Pause/Play/Answer Phone Call/ End Phone Call/ Next Track/ Last Track/ Voice Assistant
- Microphone
- RGB light
Controls
On : When the headphone is in power-off state, press and hold power
button for 3 seconds with blue LED flickering , reminding tone : power on.
Off : When the headphone is in power-on state , press and hold power
button for 5 seconds with red LED flickering once, reminding tone: power off.
Connect BT : When the headphone is in power-off state, press and hold it
for 3 seconds to enter a pairing state with red and blue LEDs flickering and
reminding tone: pairing. After the device (smart phone, tablet computer, etc.)
discovers DV68 ,press it to connect.
Connected successfully : When the headphone is successfully linked to the
device, blue LED will flicker every 3 seconds with reminding tone:
Connected
Pause/Play : When the music is on, single click the multi-function button
to pause or play.
Answer/Hang-up : click multi-function button to answer when there is an
incoming call. Click the multi-function button to end the on-going call.
Vol+: Press the Vol+ once to turn up the volume.
Vol-: Press the Vol- once to turn down the volume.
Next Track : Double-click the multi-function button skip to next track.
Last Track : Triple-click the multi-function button skip to last track.
Assistant : Long press the multi-function button for 3 seconds to enter
Voice Assistant model. Long press 3 seconds again to exit the Voice Assistant
model Reset: After plugging the USB charging line, the headphone will be reset
and powered off for charging.
Clear all paring info : Long press the Power On/Off button and Volume
down button for 5 seconds simultaneously
RGB light : Press and hold the minus button for 3 seconds to turn it on.
Turn off the RGB light, double -click the minus button to switch the light
mode
How To Wear
Hang the headphone behind your neck with both speakers clinging to your cheekbones. After that, adjust it until you feel comfortable.
Specifications
Music play time——————-Standard: 15 hours
Standby time———————-30 days
Charging time——————— 2 hours
BT version————————–5. 3
Speaker impedance————– 8Ω ±10%
Microphone sensitivity———– -40± 2 db
Product weight——————— 34g
Connection distance————–15 meters
Attentions
- Please wear the bone-conduction speakers of the headphone at your cheekbones before your ears and do not put them in your ears.
- Listening to music for an excessive long time may you feel un comfortable, please try to use a medium volume instead of a big one.
- No matter how the volume is, please do not make it prevent you from hearing the surrounding sounds. Please take care when using the headphone.
- Do not throw, press the headphone or put it in the water.
- The headphone should keep away from fire, water and high voltage devices.
- It is not for children’s use as it contains small parts.
- Please do not treat it as domestic waste. Instead, send it to your electrical and electronic recycling station .
If there is any injury or property loss due to violation of the above contents, we will not bear any responsibility.