Optoma FHDQ135S Fully Optimized 135 Inch All In One Quad LED Display Owner’s Manual
- August 15, 2024
- Optoma
Table of Contents
Optoma FHDQ135S Fully Optimized 135 Inch All In One Quad LED Display
- Bright 850 nits, 1.56mm pixel pitch – Flip chip LED display
- Quick and easy installation – Installation time dramatically reduced from days to hours
- Create, connect, and collaborate effortlessly with OSS – White Board, Display Share, and File Manager
- Eco-friendly <0.5W standby mode – Lower energy costs and conforms to ErP regulations
Featuring up to 850 nits of high brightness and an impressive contrast ratio, the all-in-one FHDQ135S’s 4-1 LED layout uses flip chip technology to improve energy efficiency and reduce running costs by up to 40% vs previous Optoma LED products. Comparison made vs FHDS130
Specifications
UPC: 796435 69 082 3, EAN: 5055387668270, Colour: black
Screen
- Screen resolution 1080p Full HD (1920×1080)
- Screen size (diagonal) 135″
- Screen size 119.37″ x 70.59″
- Minimum viewing distance 4′ 11″
- Brightness (before calibration) 850 nits
- Contrast 10000:1
- Dimensions (W x D x H) 119.37″ x 3.36″ x 70.61″
- Net weight 308.65 lbs
Screen processing
- Scaler-switcher Built in scaler-switcher
- Sender Built-in sender
LEDs
- Pixel pitch (H x V) 1.5625mm
- LEDs per pixel 4
Pixels
- Pixel configuration SMD 4-1
- LED face color Black
- LED size SMD2121
- Pixel resolution (width) 216 pixels/module
- Pixel resolution (height) 96 pixels/module
Module
- Active module width 119.37″
- Active module height 70.61″
- Viewing angle – horizontal 170°
- Viewing angle – vertical 170°
- Ingress protection (front) IP5
- Surface finish Black
- LED fixings Front access
- Storage temperature range -4°F – 104°F
- Operating temperature range 32°F – 104°F
Color
- Greyscale processing depth 12 bits
- Number of colors 281 (trillions)
- Refresh rate 2,400 Hz
Brightness
- Contrast ratio 10,000
- Brightness control levels 100
Power
- Input power (max) 1,700watts per panel
- Power supply 110 – 220V
Other
- Lifespan 100,000
- Mounting frame Optional
Connectivity
- Connections Inputs 3 x HDMI 2.0, 1 x DisplayPort, 1 x 3G-SDI, 1 x USB-A 3.0, 1 x USB-A 2.0, 1 x USB-B, 1 x Genlock
- Outputs 1 x HDMI 2.0, 1 x RS232
- Control 1 x RS232, 1 x RJ45
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>