MONODEAL ES-850 Pro Smart Bone Conduction Headphone Instruction Manual
- June 9, 2024
- Monodeal
Table of Contents
MONODEAL ES-850 Pro Smart Bone Conduction Headphone Instruction Manual
Warranty card
Warranty period: 12 months from the date of purchase
Free of charge service:
During the warranty period, if there is any breakdown caused by the product’s
build quality please contact the seller and provide this warranty card
together with the sales invoice. The product will be repaired or replaced by a
new one.
The warranty does not apply under the following circumstances:
- The product label is broken.
- Damage caused due to the product being disassembled by a non-authorized repair agent.
- Damage caused by external force or when there is visible deformation of any of the external parts.
- The product has been improperly used or stored.
- Damage or breakdown caused by force majeure.
- Other situations similar to the above.
Customer service information:
- Customer Name
- Customer Phone
- Customer Address
- Model Number
- Purchase Date
- Dealer
- Invoice number
Multi-Function Button ( )
Function | Operation | Prompt |
---|---|---|
Power on | Keep pressing key for 2s | “Power on” |
Power of | Keep pressing ****key for 3s | “Power off” |
Pairing | Keep pressing ****key for 5s | Pairing |
Multi-Point Connection |
- Keep pressing ****key for 5s
- Connect device A
- Turn off Bluetooth of device A
- Keep pressing ****key for 5s
- Connect device B
- Activate Bluetooth of device A
| Speech
Play〡Pause| Press once when music playing| N/A
Reject call| Press for 1s when incoming call| N/A
Accept call| Press once when incoming call| N/A
Redial| Press twice in standby mode| N/A
End call| Press once during a call| N/A
Voice assistant| Press thrice in standby mode| Beep
Accept incoming call and end current one| Press ****for 2s| Tone
Volume Key
Specification
Product type | Bone Conduction Headphone |
---|---|
Model no# | ES-850 Pro |
Bluetooth version | Bluetooth® V5.2 |
Material | SIlica gel+Titanium alloy+PC |
Bluetooth protocols | A2DP,AVRCP,HDP |
Effective range | More than 10 meters without obstruction |
Frequency response | 20Hz-20kHz |
Audio Code | SBC |
Battery capacity | 180mA / 3.7V li-polymer |
Standby duration | 6 hrs |
Charge time | 2 hrs |
Input voltage | 5v |
Speaker type | Bone Conduction speaker |
Speaker sensitivity | 87dB±3dB |
Microphone sensitivity | -38dB±1dB |
Waterproof rating | IPX6 |
Weight | 30g (1.23oz) |
LED Indicator
Color | Status |
---|---|
Red blinks once every 3s | Battery low |
Constant red | Charging |
Constant blue | Charging Complete |
Blue blinks | Incoming call |
Red and blue blink alternately | Pairing / Multi-point connection |
Blue blinks once every 5s | Connection Successful |
To charge the headphone
Connect the original charging cable to the magnetic suction port of the headset and the charging head respectively, and the headphone will be fully charged within 2 hours. In order to better ensure the charging life, please use the 5V-1A charging head.
Use of microphone stick
it’s only allowed to rotate 270 degrees in the direction and angle of the
arrow in the picture above. When you can’t rotate it, please rotate in the
opposite direction. Please don’t rotate vigorously to prevent damage.
Note
There are positive and negative poles corresponding to the magnetic suction charging. Mutual adsorption can charge normally; Mutual exclusion can not charge, which may cause short circuit of the main board circuit. Please do not force the magnetic suction to fit and contact.
Warning:
The life of rechargeable battery of this product is not shorter than the service life of the product. The battery must be taken out by professional recycling equipment. Any attempt to take out or replace the battery may damage the headphone and affect your warranty rights. Please do not put the battery into the fire to avoid explosion.
Tips and Maintenance
-
The earphone should be stored in a cool and dry place, and the working temperature should be 0一45 °C (32 – 113 F): Working in an environment that is too cold, too hot or too humid may shorten the life of the headphone.
-
Listening to music at too high a volume may damage your hearing and the sound may be distorted. For traffic safety, Please do not use the headphone while driving or riding.
-
After exercise, please wipe the water on the surface of the headphone, especially the position of the magnetic charging port, to prevent sweat and salt from eroding the charging port and affecting the service life of the product.
-
Clean the headphones with a soft, dry cloth.
-
Please keep away from sharp and hard objects, which may damage the headphone.
-
Do not use the headphone in direct sunlight for a long time.
-
Do not use the headphone in extreme light, temperature or vibration.
-
Please do not use headphone in high temperature environment.
For example, use a hair dryer and enter the sauna room at the same time or near the stove. -
Do not place the headphone on an unstable or indined surface.
-
Children should use this device under the supervision of adults. This product is not a toy.
Reminder
- Improper use of the headphone may cause injury to itself or may endanger personal and property safety
- In case of personal and property damage caused by improper use or warning by consumers in violation of product instructions. the company will not bear all consequences and the company will not bear any legal liability.
Safety
FCC Disclaimer
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications to this device not expressly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RE exposure requirement. The device can be used in portable exposure condition without restriction.
Declaration of Conformity for EU Countries EMC Directive 2014/30/EU
(including amendments) Low Voltage Directive 2014/35/EU RED Directive
2014/53/EU (if product has RF function)
WEEE Disposal instructions
Do not throw this electronic device into the trash when discarding. To
minimize pollution and ensure utmost protection of the global environment,
please recycle it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>