MONODEAL DG10 Pro Bone Conduction ENC Wireless Headset Instruction Manual
- October 30, 2023
- Monodeal
Table of Contents
MONODEAL DG10 Pro Bone Conduction ENC Wireless Headset
Summary of button functions
- Power On/Off/Volume up
- Volume down
- LED indicator
- charging port
- Multifunction Button: Pause/Play/Answer Phone Call/ End Phone Call/ Next Track/ Last Track/ Voice Assistant
- Microphone
- Noise reduction microphone
Controls
-
On: When the headphone is in a power-off state, press and hold the power button for 3 seconds with blue LED flickering, reminding tone: power on.
Off: When the headphone is in a power-on state, press and hold the power button for 5 seconds with a red LED flickering once, reminding tone: power off. -
Connect BT: When the headphone is in a power-off state, press and hold it for 3 seconds to enter a pairing state with red and blue LEDs flickering and
reminding tone: pairing. After the device (smartphone, tablet computer, etc.) discovers DG08, press it to connect. -
Connected successfully : When the headphone issuccessfully linked to the device, a blue LED will flicker every 3 seconds with reminding tone: Connected
-
Pause/Play: When the music is on, single-click the multi-function button to pause or play. Answer/Hang-up: click the multi-function button to answer when there is an incoming call. Click the multi-function button to end the on-going call.
-
Volt: Press the Vol+ once to turn up the volume.
-
Vol-: Press the Vol- once to turn down the volume.
-
Next Track: Double-click the multi-function button and skip to the next track.
-
Last Track: Triple-click the multi-function button skip to the last track.
-
Assistant: Long press the multi-function button for 3 seconds to enter the Voice Assitant model. Long press 3 seconds again to exit the Voice Assitant model
-
Reset: After plugging the USB charging line, the headphone will be reset and powered off for charging.
Clear all paring info: Long press the Power On/Off button and Volume Down button for 5 seconds simultaneously -
Charging: In case of using USB charging line for charging, connect the headphone with the USB power. During the charging, LED turns red. After charging, the LED turns blue.
How to wear
Hang the headphone behind your neck with both speakers clinging to your cheekbones. After that, adjust it until you feel comfortable.
Specifications
- Music play time ——————-Standard: 5 hours
- Standby time ———————-20 days
- Charging time ———————2hours
- BT version – – – – – – – – – – – – – – – – ———-5.0
- Speaker impedance ————–100+3db
- Microphone sensitivity ———–40+2db
- Product weight – – – – – – – – – – – – – – ——-29.5g
- Connection distance ————–15 meters
Attention
- Please wear the bone-conduction speakers of the headphone at your cheekbones before your ears and do not put them in your ears.
- Listening to music for an excessively long time may make you feel uncomfortable, please try to use a medium volume instead of a big one.
- No matter how the volume is, please do not make it prevent you from hearing the surrounding sounds. Please take care when using the headphone.
- Do not throw, press the headphone or put it in the water.
- The headphone should keep away from fire, water and high-voltage devices.
- It is not for children’s use as it contains small parts.
- Please do not treat it as domestic waste. Instead, send it to your electrical and electronic recycling station.
If there is any injury or property loss due to violation of the above contents, we will not bear any responsibility.