MONODEAL DG06-8 Bone Conduction ENC Wirelles Headset User Manual
- June 15, 2024
- Monodeal
Table of Contents
MONODEAL DG06-8 Bone Conduction ENC Wirelles Headset
Summary of button functions
- Power On/Off/Volume up
- Volume down
- LED indicator
- charging port
- Multifuction Button: Pause/Play/Answer Phone Call/ End Phone Call/ Next Track/ Last Track/ Voice Assistant
- Microphone
Controls
- On: When the headphone is in power-off state, press and hold power button for 3 seconds with blue LED flickering, reminding tone: power on.
- Off: When the headphone is in power-on state, press and hold power button for 5 seconds with red LED flickering once, reminding tone: power off.
- Connect BT: When the headphone is in power-off state, press and hold it for 3 seconds to enter a pairing state with red and blue LEDs flickering and reminding tone: pairing. After the device (smart phone, tablet computer, etc.) discovers DG06,press it to connect.
- Connected successfully: When the headphone is successfully linked to the device, blue LED will flicker every 3 seconds with reminding tone: Connected
- Pause/Play : When the music is on, single click the multi-function button to pause or play.
- Answer/Hang-up : click multi-function button to answer when there is an incoming call. Click the multi-function button to end the on-going call.
- Vol+: Press the Vol+ once to turn up the volume.
- Vol-: Press the Vol- once to turn down the volume.
- Next Track: Double-click the multi-function button Skip to next track.
- Last Track: Triple-click the multi-function button skip to last track.
- Assistant: Long press the multi-function button for 3 seconds to enter Voice Assitant model. Long press 3 seconds again to exit the Voice Assitant model
- Reset: After plugging the USB charging line, the headphone will be reset and powered off for charging.
- Clear all paring info: Long press the Power On/Off button and Volume down button for 5 seconds simultaneously
- Charging: In case of using USB charging line for charging, connect the headphone with the USB power. During the charging, LED turns red. After charging, the LED turns blue.
How to wear
Hang the headphone behind your neck with both speakers clinging to your cheekbones. After that, adjust it until you feel comfortable.
Specifications
- Music play time Standard: 5 hours
- Standby time 20 days
- Charging time 2 hours
- BT version 5.3
- Speaker impedance 100+3db
- Microphone sensitivity 40÷2db
- Product weight 29 g
- Connection distance 15 meters
Attentions
- Please wear the bone-conduction speakers of the headphone at your cheekbones before your ears and do not put them in your ears.
- Listening to music for an excessive long time mayake you feel uncomfortable, please try to use a medium volume instead of a big one.
- No matter how the volume is, please do not make it prevent you from hearing the surrounding sounds. Please take care when using the headphone.
- Do not throw, press the headphone or put it in the water.
- The headphone should keep away from fire, water and high voltage devices.
- It is not for children’s use as it contains small parts.
- Please do not treat it as domestic waste. Instead, send it to your electrical and electronic recycling station.
If there is any injury or property loss due to violation of the above contents, we will not bear any responsibility.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>