SW-MOTECH MSS.06.921.10000-B Engine Guard Instruction Manual
- June 4, 2024
- SW-MOTECH
Table of Contents
SW-MOTECH MSS.06.921.10000-B Engine Guard
READ AND SAVE THESE MOUNTING INSTRUCTIONS
Engine guard
Thank you for choosing this premium product from SW-MOTECH. Please carefully
read and understand all instructions, safety messages and warnings in this
mounting instructions prior to installation and use of this product to avoid
injury.
This product was developed for vehicles in their factory setting.
Compatibility with original accessory parts or other manufacturers’ accessory
parts is not guaranteed. Visit our webshop for additional information, such as
application charts and PDF mounting instructions. Any other documents that may
be required (e.g. ABE certifications), are also available for download at our
webshop. Keep these mounting instructions as reference.
SW-MOTECH assumes no liability for damage caused by improper installation
and/or maintenance work!
SAFETY ALERT SYMBOL
A This safety alert symbol is used throughout these mounting instructions to
warn of the possibility of death, bodily injury or other warnings. The words
DANGER, WARNING and CAUTION are used with this safety alert symbol to convey
important safety messages and information related to the installation and use
of this product. These words along with the safety alert symbol mean:
DANGER: Indicates a hazardous situation that, if not avoided, will result
in death or serious injury!
WARNING: Indicates a hazardous situation that, if not avoided, could
result in death or serious injury!
CAUTION: Indicates a hazardous situation that, if not avoided, could
result in minor or moderate injury!
NOTICE: Important information, but not death or injury related [property
damage only)!
WARNING: The installation and/or maintenance of this product requires
advanced mechanical skills, the proper tools, and a thorough understanding of
tool use and torque specifications.
For your own safety, SW-MOTECH recommends having installation and/or
maintenance carried out by a qualified and certified motorcycle mechanic.
WARNING: Should you choose to self-install this product, carefully and
completely read all installation and safety instructions before installation
and use, and follow all the directions and safety precautions given in the
mounting instructions to avoid serious injury or death. Also pay attention to
all relevant information in the vehicle manual during installation and use. IF
YOU DO NOT UNDERSTAND ANY PART OF THESE INSTRUCTIONS, OR NEED CLARIFICATION OF
ANY INSTRUCTION, DO NOT ATTEMT TO MOUNT THIS PRODUCT WITHOUT CONTACTING SW-
MOTECH FOR ASSISTANCE.
PREPARATION: Read the mounting instructions carefully and make sure that
all items of the parts list are included.
CAUTION: Make sure that your vehicle is parked safely and cannot fall
over. Turn off the engine and remove the ignition key. Let the engine/exhaust
cool off if necessary. Disconnect the vehicle battery when working on the
electrical system. Use appropriate tools and wear always safety glasses and
hand protection. Have another person help you.
MOUNTING: All parts and connections removed from the vehicle must be
reinstalled in accordance with the vehicle manufacturer specifications or
replaced by parts and hardware delivered by SW-MOTECH.
WARNING: Secure all threads, unless otherwise specified, with
mediumstrong strength liquid thread locker. Torque specifications undefined
by SW-MOTECH must be obtained from the vehicle manufacturer or by a certified
motorcycle workshop!
FUNCTION CHECK: After installation also make sure that no moving parts
are obstructed, and function of the vehicle is not hindered in any way. Cables
and hoses must not rub and/or be pinched.
WARNING: Before starting to ride, perform a comprehen11ive check of all
functions. After the first 50 km and then at regular intervals, check the
tightening torque of all connections and the proper fit of the product.
Installed accessories can change driving behavior/stability of the vehicle.
PARTS LIST
MOUNTING
WARNING:
- Always wear eye and hand protection
- Always us e the appropriate tools.
-
Remove the spring from the side stand and remove the screw from the gear tever
-
Remove the shown screw and take the SI “de stand from the mounting bracket.
-
-
Hook the Original Spring on the side stand. Coat the shaft of the original screw (Orig.) original Reattach with the gear lever with the original screw to the vehicle Tighten the screw with the manufactures specified torque.
-
Attach the mounting bracket (4) on the left side to the vehicle.
WARNING: Use liquid thread locker! Do not fully tighten the screw yet .
-
Remove on the right side of the vehicle the two screws, as shown in the drawing.
-
Attach the mounting bracket (8) on the right side Behind the break lever to the vehicle.
WARNING: Use liquid thread locker! Do not fully tighten the screws yet.
-
Attach the engine guard (12) to the mounting brackets (1), (4) and (8). Pay attention to the position of screw (13).
WARNING: Use liquid thread locker!
Once all parts are evenly positioned without excess tension, tighten the screws as specified.
Tighten the screws (2), (5) and (9) with the manufacturers· specified torque.
PRODUCT SPECIFIC INFORMATION
WARNING:
- Ground clearance can be reduced by this product! Special care should be taken when cornering at extreme lean angles and / or riding on uneven surfaces (for example curbs and bumps)!
- All motorcycle exhaust pipes have large geometric tolerances. Make sure to double-check all part clearances in the affected areas!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>