Karibu 10211 Octagonal Wooden Pool Palma B Instruction Manual

Table of Contents

Karibu-10211-Octagonal-Wooden-Pool-Palma-B-PRODUCT

Step 1: Compare Package Contents
- Compare the list of materials provided in the user manual with the contents of your package. Make sure all the necessary components are included.
Step 2: Determine and Cut Lengths
- Some components require you to determine and cut their lengths according to your specific needs. Use appropriate tools to cut the wood accurately.
Step 3: Assembly
- Follow the assembly instructions provided in the user manual to put together the wooden construction kit. Use the included accessories and fasteners as needed.
Step 4: Secure Access to Swimming Pool
- To prevent accidents, it is recommended to secure access to the swimming pool with a protective device. Follow the instructions provided separately for this purpose.

Product Information

FAQ

Q: What should I do if some parts are missing from my package?
- A: Please contact Karibu Holztechnik GmbH at info@karibu.de for assistance. They will be able to handle any complaints regarding missing parts.
Q: Do I need any additional tools or materials for assembly?
- A: The user manual does not specify any additional tools or materials required. However, it is recommended to have basic woodworking tools and safety equipment on hand.
Q: Can the wooden construction kit be disassembled and reassembled?
- A: Yes, the wooden construction kit can be disassembled and reassembled if needed. Follow the instructions in reverse order to take it apart and reassemble it.

Tools

First compare the list of materials with your package contents! Please understand that complaints can be processed in the non-built status only!

Parts

Karibu-10211-Octagonal-Wooden-Pool-Palma-B-FIG-4

Karibu-10211-Octagonal-Wooden-Pool-Palma-B-FIG-6

To prevent the drowning of children, it is recommended to secure access to the swimming pool with a protective device!

Installing skimmers in the main wind direction

Karibu-10211-Octagonal-Wooden-Pool-Palma-B-FIG-11

Karibu-10211-Octagonal-Wooden-Pool-Palma-B-FIG-12

Info: Installation of the pool filter

Karibu-10211-Octagonal-Wooden-Pool-Palma-B-FIG-28

Pool maintenance in autumn and winter

If the pool is surrounded by many plants and trees, it must be regularly removed from the leaves. nevertheless, leaves are dropped to the ground, they must be removed promptly due to sludge formation. For the appropriate protection, we recommend the cover from our range!
In winter, the pool should not be completely drained, because lateral ice pressure may arise. The water level should be lowered to below the upper enemas (About 10-15 cm below the nozzle) and held constant at this level are!
Empty all frost exposed pipes and the filter system completely, clean and dry / store frost. This applies to all components of plastic and those that are immersed filters (The 6-way valve of the filter system to EMPTY. Next the sand filter cover should be opened to allow air into the system arrive. By opening the drain screw on the filter vessel and the filter pump the water can run now.)
The preliminary filter, the filter pump and then clean sieve.
Set all the power switchs off and disconnect the mains cable. Remove the fuses.

Maintenance

Karibu-10211-Octagonal-Wooden-Pool-Palma-B-FIG-31