Karibu Holztechnik GmbH 92972 Saunahaus Fiete Instructions
- June 1, 2024
- Karibu Holztechnik GmbH
Table of Contents
Karibu Holztechnik GmbH 92972 Saunahaus Fiete
Product Specifications
| Netzspannung | Wattage |
|---|---|
| 400V ~ 3N | 9kW |
| 230V ~ 1N | 3.6kW |
Product Usage Instructions
Step 1: Length Determination
Determine the required length and cut the components accordingly.
Step 2: Assembly
Assemble the product with the provided accessories following the included instructions.
Step 3: Temporary Fixation
Temporarily fix the assembled parts in place to ensure stability during further construction.
Step 4: Inventory Check
Verify that all components listed in the manual are included in your package before proceeding with the installation.
FAQ
- Q: What should I do if some components are missing?
- A : Contact customer support immediately and provide details of the missing parts to arrange for replacements.
- Q: Can I modify the product dimensions?
- A : It is not recommended to alter the dimensions as it may affect the structural integrity and stability of the product.
Tools
First compare the list of materials with your package contents! Please understand that complaints can be processed in the non-built status only!
DIMENSIONS
INSTALLATION INSTRUCTIONS
Glue! Look for the same height
Width side up 
Installation door
Note Door Package
Narrow side up 
Roofing felt installation
Note! This description is only an example!
The number of bitumen strips to be used depends on your actual house size.
When joining rolls of roofing felt end to end, the overlap must be
approximately 10cm. The roof is not safe to walk on. The roof is designed for
a total load (snow, wind) and not for a point load. We recommend you to always
support the roof from below during installation. The sealing of the roof
surfaces to adjacent components with bitumen sealant has to be selected by the
customer! If it is a saddle-roofed house, do not use roofing tiles for
roofing. In this case, a 20 cm wide strip of bitumen with an overhang should
be installed on both sides of the eaves. For houses with a tonne roof, please
install bitumen roofing under the shingles. In the case of a fl at roof, the
laying of roof shingles is not possible! 
This figure shows the functional principle of the board. Regulate the exhaust air according to your own wishes.
Emergency Hammer 
- Karibu Holztechnik GmbH
- Eduard-Suling-Str. 17
- 28217 Bremen
- [email protected]
Building Instructions
First compare the list of materials with your package contents! Please understand that complaints can be processed in the non-built status only
- Handling
- Maintenance
- Care Handling
- Maintenance
- Care of the door
The guarantee is conditional on proper upkeep!
For lasting protection of the value and suitability for use, professional care and maintenance is also recommended during the warranty period this is not included in the warranty obligations. Defects must be repaired immediately upon detection.
Wood protection treatment of the door
All parts of the door must receive wood protection treatment. 7hose sections of the wood, which will not be accessible after installation, should receive complete treatment before installation. 7reat the product with a blue stain- blocking coat afterwards apply a double protective coating of an open-pored wood-protection glaze. Application of a protective coating should be repeated at least every two years. Please beware that the inserted plates of other materials may come to differ in color to the doors if you use unsuitable coating material. :ith colored and boiler pressure impregnated houses, only the exposed natural wood saw cuts and parts should need extra treatment. <ou can obtain an even color covering in inside areas with one coat of paint. For that, you should use an open-pored, acrylic-based water-dispersed lacquer. In order to guarantee a long service life of your product you should repair damaged areas immediately. Do this by whetting the damaged area and apply a new coat of paint. Enquire about suitable glazes at your local paint retailer. Furthermore, you can seal the joining of the wood window pane with a suitable sealant to guarantee a long service life of the door and prevent leakage from heavy rain. If these precautions of care are not properly carried out, it can result in deformation, blue stain, fungus infestation in the doors and frames and loss of warranty.
Cleaning
Regular cleaning and care is a prerequisite for preserving the service life and functionality of high-value products. Cleaning is to take place outside, inside, and also in the rabbet area. 7he cleaning agent used must be suitable for the relevant material please do a test before you start cleaning.
Deformation of the door
Wood reacts to environmental influences. : either exposure will lead to swelling and contraction of the wood. 7his causes variances of dimensions and slight deformation. Depending on the weather exposure, the door may need realignment by turning the hinges in- or outwards. Some door warpage is acceptable as long as the door can be made to function through the alignment options speci¿ ed here. 7he warranty does not cover damage caused by the use of excessive force.
Adjustment of the door
The door must be accurately adjusted to ensure trouble-free operation. 7he door frames must be installed right-angled and perpendicular. Furthermore, they must be installed so the width of the frame is the same at the top and bottom. If the door doesn’t close or if one panel is askew, this can be recti¿ by limited in- or outwards turning off the hinges. <ou can turn the hinges outwards up to 5 rotations. If you have a double door, the door to be secured must always be correctly aligned at the top and bottom with the appropriate hinges.
