Warn Z8000i Multi Mount Instruction Manual
- June 15, 2024
- WARN
Table of Contents
Warn Z8000i Multi Mount
WARN X8000i WINCH MULTI-MOUNT REPLACEMENT PARTS LIST
This document provides a detailed list of replacement parts for the WARN
X8000i Winch Multi-Mount, applicable for serial numbers 384073 up to 628599.
It includes two pages: an exploded diagram of the winch assembly accompanied
by a legend, and a list of parts with their respective quantities, part
numbers, and descriptions.
Exploded Diagram Description
The exploded diagram visually represents the WARN X8000i Winch Multi-Mount in
a disassembled state. It displays various components such as the motor, gear
train, drum support, and wire rope. Each part in the diagram is numbered,
corresponding to a legend on the following page that provides part details.
Specifications
| Item | Qty | Part No | Description |
|---|---|---|---|
| 1 | 1 | 37131 | END HOUSING ASSY (INCLUDES #2) |
| 48 | 1 | 5320 | HOOK, 3/8″ CLEVIS SLIP |
Replacement Parts Legend
The legend provides a detailed list of parts for the WARN X8000i Winch Multi-
Mount. It includes the quantity required, the part number, and a brief
description for each item.
Ordering Information
When ordering parts, it is important to provide the Winch Model, Serial
Number, and Battery voltage. Parts may be obtained through your local dealer
or distributor. The document also includes a note that specifies ordering
information for certain parts with unique instructions or additional details.
Parts List
X8000i MULTI -MOUNT
SERIAL NO. 384073 UP TO 628599
FAQ
-
How do I find a local dealer or distributor to order replacement parts?
Parts may be obtained through your local dealer or distributor. Contact WARN directly or visit their website for assistance in locating a dealer near you. -
What information do I need to provide when ordering replacement parts?
When ordering replacement parts, be sure to give the Winch Model, Serial Number, and Battery voltage. -
Are there any special instructions for ordering certain parts?
Yes, some parts may have specific ordering instructions or details. Refer to the notes provided under the ‘ORDERING INFORMATION’ section of the parts list. -
Can I see a diagram of the winch to identify the parts I need?
An exploded diagram of the WARN X8000i Winch Multi-Mount is provided on the first page of the document, with each part numbered to correspond with the replacement parts list.
Note:
The detailed list of parts in the table above is abbreviated for brevity. The
full document includes all parts numbered from 1 to 48, along with their
quantities, part numbers, and descriptions.