VORTICE 63015 Ariante Tower Super Fan Instruction Manual

Instruction booklet
ARIANTE TOWER SUPER

Read these instructions carefully before installing and connecting this appliance. Vortice cannot assume any responsibility for damage to property or personal injury resulting from failure to abide by the following instructions, whose application will instead ensure safe and reliable operation of the appliance over time. Keep this instruction booklet in a safe place.

Description and use

The product you have purchased is a floor standing column fan for cooling and ventilating rooms; it is not suitable for outdoor use.

Warning:

this symbol indicates that care must be taken to avoid injury to the user

• This appliance is manufactured to a high standardof craftsmanship. To ensure a long service life and overall electrical and mechanical reliability, it must be properly used and subjected to regular maintenance.

• Do not use this product for functions other than those described in the instruction booklet.

• Appliances with a plug for the electric connection are not suited for fixed connection to the power mains.

• After having removed the product from its packing, ensure that it is complete and undamaged: if in doubt contact Vortice Service Centre.

• Do not leave packaging within the reach of children or differently able persons.

• Do not throw out the original packing, but keep it for putting the appliance away if necessary.

• Do not sit on, open or leave objects/garments standing on the appliance.

• Do not direct the air flow towards young children or sick peoples.

• Certain fundamental rules must be observed when using any electrical appliance:
  – Never touch appliances with wet or damp hands – Never touch appliances while barefoot

• This appliance is not suitable for use by children or by individuals with reduced physical, sensorial or 0mental capacities, or by inexperienced or untrained individuals, unless they are supervised or instructed in its use by a person responsible for their safety. Children must always be supervised to ensure that they do not play with the appliance.

• Do not use the appliance where flammable vapours are present (spirit, insecticides, petrol, etc.).

• Position the appliance so that the stream of air coming in and going out is not obstructed.

• If you decide to stop using the appliance, switch it off and disconnect it from the power supply, storing it out of reach of children and infirm persons.

• When positioning the appliance, always respect the minimum distance from walls or surrounding objects.

Caution:

this symbol indicates that care must be taken to avoid damaging the appliance

• Do not make modifications of any kind to this appliance.
• Pay special attention when using the appliance in rooms that are not manned.
• The appliance must not be exposed to atmospheric conditions (rain, sun, etc.).
• Regularly inspect the appliance for visible defects. If any faults are found, do not operate the appliance but contact Vortice Service Centre.
• Should the appliance be dropped or suffer a heavy blow, have it checked immediately by Vortice.
• If the appliance does not function correctly or develops a fault, turn it off and contact Vortice immediately. Ensure that only genuine original Vortice spares are used for any repairs.
• The electrical mains to wich the unit is connected must conform to current standard.
• If the power socket is of a different type to the plug fitted on the appliance, call a qualified technician and ask him to replace it with a socket of the right type. Do your best to avoid the use of adapters, multiple sockets and/or extension leads; if  necessary, first make sure that they comply with current safety regulations and check that the maximum allowed power is compatible with the values on the appliance’s rating plate. Any extension leads must be as short as possible, to prevent them from overheating and triggering the thermal cut-out devices.
• Do not pull on the power cable, do not place it near heat sources and always uncoil it completely to prevent dangerous overheating. If the cable or the power plug are damaged, take the appliance to Vortice for replacement.
• Do not cover, squeeze or place the power cable near hot objects to avoid any risk of overheating or damage; at the same time, make sure it is placed so that it does not create an obstacle.
• Do not coil the power cable on the appliance and do not operate the appliance with the cable coiled.
• To prevent hazardous overheating, it is recommended to uncoil the power cable entirely and use the appliance as indicated in the instructions.
• During operation, the power socket must be easily accessible to enable quickly unplugging from the mains.
• A limited increase in temperature in the power cable and plug during use of the appliance is to be considered normal; however, if the phenomenon increases to the point that they become too hot to touch or start to deform, contact Vortice immediately.
• Always keep the appliance in an upright position.
• When the appliance is not being used, turn it off and disconnect the plug from the power supply.
• Do not immerse the appliance in water.
• Do not insert anything into the appliance.
• Keep the appliance’s intake and outlet grilles free and uncovered.
• Do not cover the appliance, as this may result in dangerous overheating.
• The electrical power source to which the product is to be connected must be able to provide the maximum amount of electrical power required by the product.If it cannot do this, contact an electrician for appropriate remedial action.
• Specifications for the power supply must correspond to the electrical data on data plate A (fig.1).

Structure and equipment

(Fig.2).

1. Control Panel Cover
2. Control Panel
3. Remote Control
4. Front Body
5. Rear Body
6. Side Supports
7. Front Cover
8. Rear Cover
9. Base
10. Power Cable

Assembling modes

1. Assemble the front and rear halves of the base, routing the power cable through the hole in the centre (fig.3);
2. Secure the base to the fan by tightening the screws at the bottom (fig.4);
3. Route the power cable through the clamp then tighten the clamp to secure the cable in position (fig.5).

Functioning

Control Panel (fig.6):

1. ON/OFF;
2. Speed Control;
3. Oscillation Control;
4. Timer Control;
5. Functioning Mode Control;

Function Indicators (fig.7):

1. Speed:
   – Low
   – Medium
   – High

2. Timer:
   – 1|2 hour
   – 1 hours
   – 2 hours
   – 4 hours

3. Functioning mode:
   – Breeze
   – Night

Operation Modes

Insert the plug into a power socket. Press the ON/OFF button. The fan starts working in the mode currently selected, as shown by the function indicators.
You can change functioning mode by pressing the various control buttons as follows:

1. ON/OFF : switches the fan on and off;

2. Speed Control : selects 3 speeds in sequence:
   Low, Medium, and High, corresponding to the three speed indicators:
   : Minimum velocity;
   : Medium velocity;
   : Maximum velocity;

3. Oscillation control : you can select whether on not the fan oscillates round the axis;

4. Timer Control : you can program the fan to switch itself off after a certain time. Press the button to increase this time in intervals of 0.5 hours (up to a maximum delay of 7.5 hours if you press the button 15 times). The time setting is shown by the time indicators. The current time setting corresponds to the sum of the times for each indicator lit 1/2H 1H 2H 4H (all indicators lit means a maximum time of 7.5 hours).

5. Functioning mode control : selects one of three functioning modes:
   “normal” (indicator off): the fan functions continuously at the previously selected speed (Low, Medium, or High);
   “breeze”: : the fan automatically cycles between all 3 speeds (high, medium, low), to simulate the effect of a natural breeze. There are three levels of breeze, depending on what fan speed is currently selected: strong breeze: if high speed is selected (high speed predominates in the 3 speed cycle);
   medium breeze: if medium speed is selected (medium speed predominates in the 3 speed cycle);
   gentle breeze: if low speed is selected (low speed predominates in the 3 speed cycle).
   “night”: fan speed is automatically reduced with respect to the selected speed to take account of the drop in body temperature that occurs naturally during sleep. In other words:
   A: If you select the “Night time” function with the fan set to high speed, the fan will initially operate in “strong breeze” mode, before switching to “medium breeze” after 30 minutes, and then to “gentle breeze” after a further 30 minutes. After this the fan continues to function in “gentle breeze” mode until it is switched off (manually or at the end of the Timer setting). B: If you select the “Night time” function with the fan set to medium speed, the fan will initially operate in “medium breeze” mode before switching to “gentle breeze” after 30 minutes. After this the fan continues to function in “gentle breeze” mode until it is switched off (manually or at the end of the Timer setting). C: Set the fan to “night” mode while it is at minimum speed to set it into “light breeze” operating mode until the device switches off (manual or at the end of the delay set via the Timer).

Remote Control

Preparation:

1. remove the remote control from its seat on the rear of the fan (fig.8);
2. open the cover of the battery compartment (fig.9);
3. Insert 2 AAA batteries, taking care to respect the polarity as shown on the bottom of the battery compartment (fig.10);
4. Close the cover of the battery compartment (fig.11).

Functioning/Operation:
The remote control replicates all the functions of the main control panel. The remote control provides the user with 5 buttons, with the same functions as those on the fan itself. Changes in setting made using the remote control are shown by the corresponding indicators lighting up on the fan. Every time you send a command to the fan, the command indicator on the remote control lights up (fig.12). A buzzer on the device confirms that it has received the command successfully.

Orienting the Fan

To orient the fan so that the air flow points in the desired direction, hold the top of the fan in both hands and turn it to the right or left as required (fig.13).

Cleaning

Before cleaning the unit or carrying out maintenance operations turn the main switch off and remove the plug from the power supply (fig.14-17).

Disposal

This product complies with Directive 2012/19/EU on the management of waste electrical and electronic equipment (WEEE).
The crossed-out wheeled bin symbol on the appliance indicates that, at the end of its life, the product should not be discarded together with household waste but must be taken to a separate collection point for electrical and electronic equipment. This will avoid negative effects on the environment and health, and will encourage correct treatment, disposal and recycling of the materials from which the product is made.
Contact the municipal authority for the location of this type of facility. Alternatively, the distributor is obliged to take back the appliance to be disposed of free of  charge in exchange for the purchase of an equivalentappliance.
VORTICE S.p.A. reserves the right to make improvements to products at any time and without prior notice.
VORTICE GROUP COMPANIES

VORTICE S.p.A.
Strada Cerca, 2 – frazione di Zoate
20067 – Tribiano (MI)
Tel. +39 02-90.69.91
ITALY
vortice.com
[email protected]| VORTICE LIMITED
Beeches House-Eastern Avenue
Burton on Trent – DE 13 0BB
Tel. +44 1283-49.29.49
UNITED KINGDOM
vortice.ltd.uk
[email protected]
---|---
VORTICE INDUSTRIAL Srl
Via B. Brugnoli, 3
37063 – Isola della Scala (VR)
Tel. +39 045 6631042
ITALY
vorticeindustrial.com
[email protected]| VORTICE LATAM S.A.
Bodega #6
Zona Franca Este Alajuela – Alajuela 20101
Tel. (+506) 2201 6934
COSTA RICA
vortice-latam.com
[email protected]
VORTICE VENTILATION SYSTEM (CHANGZHOU) CO.LTD
Building 19, No.388 West Huanghe Road, Xinbei District,
Changzhou, Jiangsu Province CAP:213000
CHINA
vortice-china.com
[email protected]| CASALS VENTILACIÓN INDUSTRIAL IND., S.L.
Ctra. Camprodon, s/n
17860 – Sant Joan de les Abadesses (Girona)
SPAIN
casals.com
[email protected]

UK AND IRELAND CONDITIONS OF WARRANTY
This guarantee is offered as an extra benefit and does not affect your legal rights. All electrical appliances produced by VORTICE SPA are guaranteed by the Company for 2 years against faulty material or workmanship. If any part is found to be defective in this way within the first twentyfour months from the date of purchase or hire purchase agreement, we, or our authorised service agents, will replace or at our option repair that part without any charge for materials or labour or transportation, provided that the appliance has been used only in accordance with the instructions provided with each appliance and has been not connected to an unsuitable electricity supply, or subjected to misuse, neglet or damage or modified or repaired by any person not authorised by us. The correct electricity supply voltage is shown on the rating plate attached to the appliance.
This guarantee is normally available only to the original purchaser of the appliance, but VORTICE will consider written applications for transfer. Should any defect arise in any Vortice product and a claim under guarantee become necessary, the appliance should be carefully packed and returned to your approved Vortice stocklist. This portion of the guarantee should be attached to the appliance.
UK-IRELAND
Send the guarantee in sealed envelope to:
Vortice Limited Beeches House Eastern Avenue Burton on Trent DE13 0BB United Kingdom
I authorize VORTICE LTD. to include my personal details within their database, which they use, via a third party for the despatch of advertising material, at any time, in accordance with the regulations in force within my country. I can have access to my details and can request changes, or prohibit the usage of my details.This will be done by addressing my request directly to:
Vortice Limited Beeches House Eastern Avenue Burton on Trent DE13 0BB United Kingdom.
I do not authorize (please tick if required)
GUARANTEE
TO BE RETAINED This warranty must be attached to the appliance should it need to be returned for servicing.
N.B. Guarantee is only valid if all details are completed correctly. CUSTOMER DATA
name ____
surname __
street _
post code __
town _
I have read and understood the terms and conditions of this guarantee and I authorize the processing of my personal details (see overleaf).
Signature _____
Mailing date

COD. 5.671.084.187
29/11/2022

Documents / Resources

| VORTICE 63015 Ariante Tower Super Fan [pdf] Instruction Manual
63015 Ariante Tower Super Fan, 63015, Ariante Tower Super Fan, Tower Super Fan, Super Fan, Fan
---|---

References

• Casals Ventilación - Fabricante de Sistemas de Ventilación
• index- Your adventure begins here
• 意大利威特奇集团涡风通风系统（常州）有限公司
• VORTICE LATAM - Aire es Vida
• Vortice ventilation, fans and air conditioners
• Vortice Industrial | Better air for Better life
• Vortice ventilation, fans and air conditioners

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>