kogan KAMN15CSA 15.6 Full HD Portable IPS LED USB-C Touchscreen Monitor User Guide

USER GUIDE

15.6″ Full HD Portable IPS LED
USB-C Touchscreen Monitor
1920 X 1080

SAFETY & WARNINGS

• Read these instructions. All safety and operating instructions must be read before this product is operated.
• Keep these instructions — Retain this manual for future reference.
• All warnings on the device and in the operating instructions must be adhered to.
• Do not use this equipment near water. The appliance must not be used near water or moisture (for example, in a wet basement or near a swimming pool).
• Clean only with a dry cloth. Do not use solvents or petroleum-based fluids.
• Only use attachments and accessories specified by the manufacturer.
• Unplug the device during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified personnel. Servicing is required when the product has been damaged in any way, such as when liquid has been spilled, when objects have fallen into the product, when it has been exposed to rain or moisture, when it does not operate normally or has been dropped.
• Do not remove the safety covers. There are no user serviceable parts inside. Trying to service the unit yourself is dangerous and may invalidate the product’s warranty.
• Only qualified personnel should service this device.
• Contact help.Kogan.com for assistance if required.

WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The product must not be exposed to dripping or splashing and objects filled with liquids, such as vases, must not be placed on the product.

OVERVIEW

A. 15.6″LED Portable Monitor
B. Type-C full function
C. lype-C full function
D. Mini HDMI| E. Power Button
F. Micro-USB (OTG)
G. Headset Hole
---|---

USING COVER CASE

CONNECTIVITY

Plugging in
If the device you’re connecting to has a USB-C port, connect one end of the USB-C to USB-C cable to the device and the other end to the portable monitor.
Some devices may not provide enough power to the monitor. Check the USB-C port on your device for the symbols shown in the table below.
If you have one of the green checked symbols, then your USB-C port should provide both data and enough power to the monitor.
Note:
MacBook ports should be compatible even if there are no symbols next to the port.

If the monitor won’t turn on, connect a USB-A to USB-C cable along with an HDMI cable.

Computer (via USB-C)
The portable monitor can be connected to a compatible computer using the supplied USB-C cable. This must be connected to the primary USB-C port on the monitor’s right side. The
computer will provide power and signal to the monitor and can be used for extended display or duplicated display use.

Computer (via HDMI & USB-A)
If connecting to a computer without a USB-C port, you can utilize HDMI as long as you also provide a power supply. There are two options for this. The first is to connect the supplied HDMI-to-Mini HDMI cable between the computer and the portable monitor, while also connecting to the computer via USB to provide power. Connect the USB-A from the computer to the primary USB-C port on the monitor’s right side.

Note:
If using a power bank (not supplied) as an external power source, it must be larger than 16W. Power banks can be used as external power for every connection shown here, not just mobile phones.

Other devices (via HDMI & USB or power adapter)
If connecting to a device without a USB-C port, you can utilise HDMI as long as you also provide a power supply. There are two options for this. The first is to connect the supplied HDMI-to-Mini HDMI cable between the device and the portable monitor, while also connecting to the device via USB to provide power. Connect the USB-A from the device to the primary USB-C port on the monitor’s right side.
The second option for HDMI connection is to connect the supplied HDMI-to-Mini HDMI cable between the device and the portable monitor, while also connecting the monitor directly to an external power adapter (supplied) via USB. For this, you can use either the primary USB-C port on the monitor’s right side or the secondary USB-C port on the monitor’s left side.

Note:
When connecting a device using HDMI, to ensure the smooth transmission of the signal be sure to connect the power cable first, then connect the HDMI.

Purpose of Micro USB interface
Step: You can connect the keyboard or mouse with Micro USB to USB-A Cable.
Micro-USB supports OTG, OTG stand for USB On-The-Go

OPERATION

OSD touch menu function

Press the display menu key once to activate the OSD menu on the screen. Short press the menu key or touch the exit key in the menu to exit the touch menu on the screen (the menu will automatically exit after about 9 seconds).
When the system sleeps, press and hold the menu key for 3 seconds to wake up.

| Modulation| | Connection of Type-C
---|---|---|---
| Brightness adjustment| | HDMI connection
| Contrast adjustment| | Low blue light
| Accelerated response time| | Reset
Free Sync| FreeSync function| | Quiet mode
| Move Menu Up| | Move Menu Down
| Exit menu| |

| Standard mode| | Film mode
---|---|---|---
| Game mode| | Document mode
FPS| FPS Game Competitive Mode| RTS| RTS game competitive mode
6500| Warm color temperature| 9300| Cold color temperature
USER| Color temperature USER| |

HDR| High motion picture mode| LANG
UAGE| Language setting
---|---|---|---
ON| Switch on| | Chinese can be set
OFF| Toggle Off| En| English can be set
AUTO| Switch automatic mode| De| German can be set
Fr| French can be set| | Korean can be set
| Japanese can be set| |

CLEANING & CARE

Before cleaning the monitor, unplug the monitor power cord from the electrical outlet.

• When cleaning the antistatic screen, slightly dampen a clean, soft cloth with water. If possible, use a dedicated screen-cleaning tissue or solvent for electrostatic coating. Do not use benzene, thinner, ammonia, abrasives or compressed air.
• If you find white powder when you unpack your monitor, wipe it off with a cloth.
• Be careful when operating the monitor, as dark monitors are easier to scratch and leave visible scratches than light monitors.

SPECIFICATIONS

Audio

Speaker| 1Wx2
Dimensions
Dimensions| 418X280X78mm
Display
Brightness| 220cd/mm2
Colours| 16.7M
Contrast Ratio| 700:1
H DR| Supported
Native Aspect Ratio| 16:09
Panel Manufacturer| BOE
Panel Type| IPS
Refresh Rate| 60HZ
Resolution| 1920X1080
Size| 15.6″
Viewing Angle| 170° ( H)X 170° (V)
Features
Flicker- free| Yes
Low Blue Light| Yes
Inputs
HDMI| 1
USBType-C| 2
Outputs
Headphone Jock| Yes
Power Consumption
Power On:| Less than or equal to ≤ 15W
Standby:| Less than or equal to 0.5W
Power Off:| Less than or equal to 0.5W

TROUBLESHOOTING

monitor and computer is connected properly and secure y.
• Check the Connectivity steps in this guide and ensure the correct USB-C ports are being used. If using HDMI, ensure a power source (USB-A or power adaptor)is being used.
• Use other extricable quipment to confirm that the power outlet is working properly.
•  Make sure that the power button is pressed correctly.
• Make sure that the correct input source is selected through the input source menu.
No video I Power
I picture (LEDlit)| •  Improve brightness and contrast with OSD.
• Check whether the indicators on the side are normal.
• Check if the video cab e connector pins are bent or broken.
• Check whether the power adapter is proper y connected.
• Make sure that the correct input source is selected through the input source menu.
Missing pixels/ spots and light leaks on the screen| •  Turn off and on again.
• Restore the monitor to factory settings.
• Use OSD to adjust brightness and contrast.
• Pixels that are permanently off are an inherent defect in LED technology.
• Contact us about monitor quality and pixel issues.
Display fails when switching| •  Make sure that the video cabs of the monitor and HDMI output device are properly connected.
• Ensure power is being supplied to the monitor (check Connectivity settings)
• Reset the monitor to factory settings.
Picture is missing co ours| • Make sure thot the video cob e connecting the monitor and the computer is properly connected.
• Adjust custom R/G/B values. Co our in the co our menu of OSD.
• In the advanced settings OSD, change the input co our format to PCRGB or YPbPr.
Screen image is too small| • Check the aspect ratio setting in the monitor settings OSD
• Restore the monitor to factory settings.
OSD does not appear on the screen| • Tum off the monitor, disconnect and reconnect the power cord and tum on the monitor.
No picture, indicator light is blue| • Check the signal source. Make sure thot the computer or phone is not in sleep mode.
• Check thot the signals be is property inserted. Reconnect the signal cobe if necessary.
• Restart your computer or phone.
The picture does not fill the entire screen.| • Since the resolution of the some screen of the mobile phone con be rescaled (aspect ratio), the display con be displayed in full screen.
• Computer equipment con be set to 16: 9 resolution, the display icon be full screen display
• Ploy o video source with o 16: 9 video sources and the monitor con display full screen.

NOTES__

Need more information?
We hope that this user guide has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>