Hanwha Vision SBP-300CM Ceiling Mount Adaptor Instruction Manual
- June 15, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBP-300CM Ceiling Mount Adapter
Package
Product Overview
This product is used to install the Smart Dome Camera and Anti Vandal Camera on a concrete ceiling.
Installation Precautions
- Make sure that the installation place can endure at least 4 times the total weight of the Ceiling Mount Adaptor, Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
- For a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
- Each anchor bolt to use must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
Installation
- Pull out the external power cable, BNC cable and communications cable (for connecting to the “Camera”) through the rear of the Ceiling Mount Adaptor into the pipe.
- Then, it is recommended to keep the cables at a distance of about 100 mm from the pipe
- Mark and drill 4 holes into the Ceiling Mount Adaptor and insert the Anchor Bolts or Nuts (M10).
- Secure the Ceiling Mount Adaptor onto the ceiling using the “Anchor Bolts or Nuts (M10)”.
- Mount the Camera set on the Pipe.
- Install the camera according to the camera’s installation guide
Product Specifications
- Weight: 700g
- Material: Aluminum
- Operation temp. : -50°C~60°C
- Operation hum. : 0~100%
Product Outline
PT01-005166D
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>