Hanwha Vision SHD-3000F1 In Ceiling Housing Instruction Manual

Hanwha Vision SHD-3000F1 In Ceiling Housing

Product Specifications

• Model: SHD-3000F1
• Type: In-ceiling Housing
• Designed for: Smart dome cameras
• Mounting Style: Built-in style on a double-layer ceiling
• CEILING BOARD Thickness: Less than 40mm

Product Usage Instructions

Installation (Indoor Type)

1. Select an installation position that can endure more than 4 times the total weight of the installation structure.
2. Ensure there is at least 250mm of spare height above the CEILING BOARD.
3. CEILING BOARD thickness should be less than 40mm.
4. Secure the SAFETY WIRE to avoid product falls.
5. Use the provided SCREWS to attach the camera to the ADAPTOR.

Fixing the Anchor Bolt

1. Fix the ANCHOR BOLT onto the concrete CEILING and secure the SAFETY WIRE to it as follows:

• Tighten nut (N1) on the ANCHOR BOLT.
• Insert the provided SAFETY BRACKET into the ANCHOR BOLT.
• Tighten two nuts (N2, N3) onto the ANCHOR BOLT.
• Hook and fix one end of the SAFETY WIRE onto the SAFETY BRACKET.
• Hook and fix the other end of the SAFETY WIRE onto the HOUSING.

Connecting to the Camera

• Insert the external cable through the side hole on the housing to the inside of the housing. Refer to the camera’s installation manual for cable connection details.

Fixing the Housing

• Push the HOUSING inside the CEILING through the CEILING hole, and tighten the SCREWS clockwise to fix it on the CEILING. Ensure firm attachment to the CEILING BOARD.

Attaching Dome Camera

• Combine the dome camera and bracket using two screws. Insert the bracket where the camera is mounted into the housing and fix it by turning it in the LOCK direction.

Completing Installation

• When installation is completed, remove both PROTECTIVE TAPE and PROTECTIVE COVER from the lens. Attach the COVER to the HOUSING.

FAQ

Q: What is included in the package?

• A: The package includes the HOUSING, SAFETY BRACKET (1EA), SAFETY WIRE (1SET), TEMPLATE (1EA), Lower bracket (exclusively for indoor dome cameras) (1EA), and outdoor type components (3EA).

Q: What is the maximum CEILING BOARD thickness supported?

• A: The CEILING BOARD thickness should be less than 40mm for proper installation.

OVERVIEW

This In-CEILING HOUSING is a mounting ADAPTOR that is designed to mount the smart dome camera in built-in style on a double-layer ceiling.

WHAT’S INCLUDED

INSTALLATION INSTRUCTIONS

1. Select an installation position or place that can endure more than 4 times of the total weight of the installation structure.
2. At least 250mm or more of spare height is required above the CEILING BOARD.
3. CEILING BOARD’s thickness should be less than 40mm.
4. Be sure to secure the SAFETY WIRE to avoid a product fall.
5. If you want to attach the camera to the ADAPTOR, use the only provided SCREWS.

INSTALLATION (INDOOR TYPE)

1. Place the TEMPLATE on the CEILING BOARD and drill a guided hole.
2. Remove the round filling (“C”) from the TEMPLATE.
3. Place TEMPLATE A onto the CEILING BOARD to which you will attach the ceiling mount ADAPTOR and drill a hole of Ø198mm in diameter. See the figure below for the hole shape.
4. Fix the ANCHOR BOLT onto the concrete CEILING, and secure the SAFETY WIRE to the ANCHOR BOLT as below:
5. Tighten the nut (“N1”) on the ANCHOR BOLT.
6. Insert the provided SAFETY BRACKET into the ANCHOR BOLT.
7. Tighten two nuts (“N2”,” N3”) onto the ANCHOR BOLT.
8. Hook and fix one end of the SAFETY WIRE onto the SAFETY BRACKET.
9. Hook and fix the other end of the SAFETY WIRE onto the HOUSING as shown below.

  * The ANCHOR BOLTs and nuts are optional and not included in the product package.

3. To connect to the camera, insert the external cable through the side hole on the housing to the inside of the housing as shown in the figure.
   • Refer to the installation manual of the camera that you want to install, and prepare the necessary cables for the camera connection.
4. Push the HOUSING inside the CEILING through the CEILING hole, and tighten the SCREWs (x2) clockwise to fix the HOUSING on the CEILING. (The BRACKET will be positioned from to as shown.)
   • Ensure that the HOUSING is firmly secured to the CEILING BOARD.
5. Combine the dome camera and the bracket using two screws.
6. Insert the bracket where the camera is mounted into the housing and fix it by turning it in the LOCK direction.
   • When the installation is completed, remove both PROTECTIVE TAPE and PRETOECTIVE COVER from the lens.
7. Attach the COVER to the HOUSING.

  * The ANCHOR BOLTs and nuts are optional and not included in the product package.