Hanwha Vision SBP-300HMS6 Hanging Mount Bracket User Manual
- May 15, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBP-300HMS6 Hanging Mount Bracket
Package
Product Overview
- SBP-300HMS6 is a bracket that is used when XNV-6080RS, 6120RS, or 8080RS cameras are installed with Wall mount Brackets (SBP-300WMS1, SBP-300WMS).
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Hanging Mount Bracket, Camera, and Wall/Ceiling/Parapet Mount Bracket.
- The Hanging Mount Adaptor can be also connected to a 1.5” NPT screw-thread pipe as well as to the Wall/Ceiling/ Parapet Mount Bracket.
Installation
- Insert the Hanging Mount Bracket into the 1.5” NPT screw-thread (female) pipe or the Wall Mount Bracket (SBP-300WMS1, SBP-300WMS) and turn it clockwise to secure to the Pipe or Bracket.
- Make sure you fix the Pipe or Bracket so that it reaches the end of the 1.5” NPT screw thread on the Hanging Mount Bracket. If not secured tightly, the Hanging Mount Bracket may loosen from the Pipe or Bracket, causing physical damage or malfunction. (Make sure you check the connection between two components before proceeding with the next step.)
- Install the Hanging Mount Bracket onto the camera.
- Make sure you insert the Bracket in the right direction.
Product Specifications
- Weight : 1.5Kg
- Material : Stainless
- Operation temp: -50°C~60°C
- Operation hum: 0~100%
Product Outline
Read User Manual Online (PDF format)
Loading......