Saramonic T3L Professional Condenser Microphone User Manual
- June 16, 2024
- Saramonic
Table of Contents
Saramonic T3L Professional Condenser Microphone
Product Information
Specifications
- Acoustic Principle: Directional
- Pattern: Super-cardioid
- Frequency Range: 75Hz – 150Hz
- Sensitivity: +6dB high frequency boost
- Output Impedance: -10dB PAD
- Maximum Output Dynamic Range: Not specified
- Maximum SPL: Not specified
- Signal to Noise Ratio: Not specified
- Power: Built-in rechargeable battery or 48V Phantom Power
- Output Connection: XLR
- Dimensions: Not specified
- Weight: Not specified
Packing List
- Soundbird T3L microphone
- Foam windshield
- Mic clip
- Shock mount
- MicroUSB cable
- XLR cable
Power Supply
The Soundbird T3L microphone can be powered by the built-in Li-ion battery
or by connecting it to devices that provide 48V Phantom Power, such as
Saramonic SR-PAX2, SR-AX104, SR-AX107. When
phantom power is applied, the built-in battery will not be used or charged.
Feature
For a better recording experience, the application SmartRecorder is
recommended. You can follow our WeChat account for more details.
Trademark and Contact Information
Saramonic is a trademark registered and owned by Shenzhen DSQN Investment
CO., LTD. COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL (A brand of DSQN). Room
2009, Shenzhou Bairuida Bldg, Banxuegang Road, Bantian Street, Longgang
District, Shenzhen, China 518129. Tel:
400-613-1096. Email:
info@saramonic.com. Made in China.
Product Usage
Cautions
- Do not use the microphone under moisture conditions or water, and do not expose it to rain. Please store it in a cool, dry place.
- Use and store the microphone in normal temperature. Avoid moving it frequently from overheated to supercooled conditions and keep it away from heat sources such as heaters or ovens.
- When using and storing the microphone, pay attention to dust and moisture.
- Handle the microphone with care to avoid violent collisions.
- To avoid acoustical feedback, do not hold the microphone close to loudspeakers.
- For the best pick-up pattern, do not hold your hand against the microphone cover.
- Do not exceed the maximum load capacity of the microphone.
Usage Instructions
- Connect the microphone to your recording device or mixer using the XLR output or XLR cable.
- If using the built-in battery for power, ensure it is charged before use. If using 48V Phantom Power, connect the microphone to a compatible device.
- Use the 75Hz/150Hz high pass filter button to reduce low-frequency noise if needed.
- Use the +6dB high frequency boost to enhance high-frequency sounds.
- Use the -10dB PAD to reduce the microphone’s sensitivity for loud sound sources.
- Press the power button to turn on/off the microphone.
- Monitor the power indicator lights (blue, green, and red) to check the battery level.
- Position the microphone according to your recording needs, ensuring it is pointing towards the sound source for optimal pickup.
- Record your audio or use the microphone for live broadcasting, filmmaking, field recording, sound design, or other applications.
FAQ
- Q: Where can I get help if the user manual doesn’t solve my problems?
A: If the user manual can’t help you solve your problems, you can ask your retailer for assistance or email us at info@saramonic.com.
Statement
Please read this manual carefully before using and strictly operate and store
in accordance with the instructions. Please save it for your future reference.
If the user manual can not help you to solve problems, please ask your
retailer for help or email us:
info@saramonic.com.
Cautions
- Do not use the unit under moisture condition or water, don’t expose it to rain. Please store it in a cool, dry place.
- Please use and store it in normal temperature. Do not move it from overheated to supercooled condition frequently as well as keep away from heat sources such as heater or oven.
- When using and storing, please pay attention to dust and moisture.
- Be careful to violent collision.
- To avoid acoustical feedback, do not hold the microphone close to the loudspeakers.
- For the best pick-up pattern, do not hold your hand against the microphone cover. Do not exceed the maximum load capacity.
Introduction
Saramonic Soundbird T3L is a super-long directional shotgun microphone
features a super-cardioid polar pattern, built-in rechargeable battery, 75
Hz/150 Hz low cut switch, +6 dB high frequency boost, -10 db PAD and power
button. Soundbird T3L is very fit in several environments for applications such
as DSLR video making, ENG, filmmaking, field recording, sound design, and
broadcast applications.
Packing List
75 Hz high pass filter button- 150 Hz high pass filter button
- +6 dB high frequency boost
- -10 db PAD
- Power button
- Built-in Li-ion battery
- Foam windshield
- XLR output
- Micro USB input
- Mic clip
- Shock mount
- MicroUSB cable
- XLR cable
Power Supply
The Soundbird T3L can be powered via
- The built-in lithium battery; or
- 48V phantom power, which is supplied by your camera or recording devices (such as Saramonic SR-PAX2, SR-AX104, SR-AX107.) When phantom power is applied, the built-in battery will not be used, or charged.
| Power | by Built-In Battery | by 48V Phantom Power | Low Power |
|---|---|---|---|
| Power Indicator | Blue Light | Green Light | Red Light |
Feature
-
-10dB Pad
Attenuates the microphone input to allow for the recording of loud sounds without clipping. -
75Hz/150Hz High Pass Filter
Reduces low frequency and infrasonic rumble from HVAC systems indoors or street traffic outdoors from over-powering the recording. -
High Frequency Boost
Restores some of the high frequency content that is often lost when a blimp or furry windshield is placed over the microphone and improves the intelligibility of recorded speech. -
High Frequency Boost
The built-in battery supports at least 150 hours operation. -
Battery Indicator
If you would like to check the battery level during recording, double press the Power button, the 5 indicators will show the remaining battery capacity. If 5 indicators are all blue, the battery is full. -
Supplied with foam windshield, mic clip and shock mount, XLR Cable and MicroUSB charging cable
Specification
| Acoustic Principle | Line gradient |
|---|---|
| Directional Pattern | Super-cardioid |
| Frequency Range | 35 to 20k Hz (selectable HPF 75/150 Hz) |
| Sensitivity | -36±3dB (0dB=1V/Pa,at 1KHz) 1.5V 2.2k |
| Output Impedance | 150 ohm |
| Maximum Output | 10 dBu (at 1 kHz, 1% THD into 1 kOhm) |
| Dynamic Range | 125 dB (per IEC651) |
| Maximum SPL | 110 dB |
| Signal to Noise Ratio | 80 dB SPL (per IEC651) |
| **Power** | 48V phantom power; built-in lithium battery (battery life:150 |
hours)
**Output Connection| 3-pin XLR, balanced output between Pin 2 (+), Pin
3 (-) and Pin 1 (ground)
Dimensions| 3952323 mm
Weight**| 222g (7.83 oz.)
Packing List
- Soundbird T3L Microphone
- Micro USB Cable
- SR-SMC1 Mic Clip
- SR-SMC3 Shock Mount
- Foam Windshield
- 60cm (1.9′)XLR Cable
POLAR PATTERN
For better recording experience, the app-lication SmartRecorder is recommended.
Please follow our WeChat account for more details.
Website: www.saramonic.com
Saramonic is a trademark registered and owned by Shenzhen DSQN Investment CO.,
LTD. COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN )
Room 2009, Shenzhou Bairuida Bldg, Banxuegang Road, Bantian Street, Longgang
District, Shenzhen, China 518129
- Tel: 400-613-1096
- Email: info@saramonic.com
Made in China
References
- Saramonic-Premium Microphones, Headphones and other Pro Audio Accessories
- Manual-Hub.com – Free PDF manuals!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>